Question about Black & Decker Kitchen Appliances - Others

Open Question

Easysrweprodprotect No the Iron the steam hole has a covering that one of us can not seem to remove, where is the instruction for that part?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

snakehead
  • 1074 Answers

SOURCE: My Tefal Steam Generater Iron will not steam

check the little tube that regulates the water to the holes it needs to be changed.good luck.

Posted on Apr 18, 2007

oscarn
  • 109 Answers

SOURCE: Water drips out of steam holes

I suspect that by placing it on its heel rest the water from the tank is not allowed to enter into the steam chamber and when you go into ironing mode there is a rush of water that is cooling down the sole plate to below steaming temperature. Try keeping it in the horizontal position on a heat proof pad and press the steam button just before going into ironing mode.

Posted on Sep 21, 2007

  • 1 Answer

SOURCE: Breville steam glide 2200w iron

Hello, dont know if you still have no instruction book for this iron, i have the same iron and found the instruction booklet on there website. go to breville website, and irons and download.

Posted on Jan 16, 2008

geokohler
  • 304 Answers

SOURCE: tefal proline express steam generator iron needs de scaling

Make a solution of half water and half white vinegar. Fill up your iron and get it good and hot then let it sit a couple hours. flush out and repeat as necessary. Hope you find this helpful. Please give me a fixya rating If this works for you. It works very well as long as it is not completely filled with scale. Once you have it good and clean By a gallon of bottled water at the market and use that for your Iron and you will never have a scale problem again. I learned how to do this 20 years ago from a 80 year old woman from england. If it is really bad you can up the vinegar concentration but do not go higher than 2 cup to 1.
George

Posted on Jul 24, 2008

  • 1 Answer

SOURCE: removing limescale from iron and steam chamber.

1/4 C. Apple Cider Vinegar : 1/4 C Water
Pour into the iron and let it steam through; have anything that you want to have a permanent crease -- like pleats in a skirt or the front seam of slacks? The vinegar/water mix will make it a strong pleat. When pleated skirts were the fashion in the 70's, I had a white gaberdine skirt and used clear vinegar to avoid any discoloration, and the pleat would not quit!

Posted on Oct 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot get my GCSBDS212 steam iron to make steam.


Have a look at the steam holes in the bottom, they should be nice an clean with no blockage. If they are blocked up you will need to remove the calcium buildup inside the iron. Get some LimeAway at HDepot, pour it into the water reservoir, let sit overnight. Next day turn the iron on and try steaming on some old papers covered with an old rag or towel, once it starts working steam for a few minutes, then unplug, drain it, put in clean distilled water and flush it out until the steam comes out clear. Use distilled water not tap water, it has much less mineral content and will be less likely to plug it up. Most pharmacies and Walmart sell distilled water. ! gallon about $1.25.

Feb 05, 2015 | Sunbeam GCSBDS-212 Digital Steam Master...

2 Answers

Floor steamer not getting hot


follow this steps and fix it.
GOD BLESS YOU
Clean an iron:
  1. Unplug the iron and make sure it is cool before cleaning.
  2. Use a toothpick or pipe cleaner to remove buildup in the steam vents, making sure the debris doesn't fall into the vents.
  3. Use a fine sewing needle to carefully clean the spray nozzle of mineral deposits.
  4. To flush sediment from a steam iron, pour 1/2 cup water and 1/2 cup vinegar into the water tank. Place the iron on a rack over a broiling pan and set the iron to steam until the tank runs dry. Repeat if necessary. Or follow the instructions for using a commercial iron cleaner.
Service the steam and spray mechanism:
  1. Unplug the iron.
  2. Use a fine sewing needle to unclog the steam valve assembly. Also, check the valve spring and replace it if it is broken or has lost tension.
  3. If the spray pump is accessible, remove it and check for leaks by placing the spray tube in water and squirting the pump. Clean or replace as needed.
Clean a metal soleplate:
  1. Unplug the iron.
  2. Use a sponge and commercial soleplate cleaner or baking soda and water to remove dirt buildup on the soleplate. Rinse well with water and dry. Don't use harsh abrasives or immerse an electric iron in water.
  3. Use very fine steel wool (0000) or an emery cloth to remove scratches and burns on the soleplate, then clean the soleplate.

Sep 30, 2013 | Conair Compact Garment Steamer Iron

1 Answer

Where do I put in water in Rival IR5410 steam iron?


There does not seem to be a manual or instructions available for the IR5410. An Instruction Manual is available for the IR699 and IR999 from the following link:

http://www.rivalproducts.com/manuals/MANUALS/IR999_43_64403016.PDF

There is an illustration of the iron which shows the location of the Water Fill Hole just below the Variable Steam Selector.

Trust this will be helpful.

May 21, 2012 | Kitchen Appliances - Others

1 Answer

My Philips steam iron Easy Care 3232 oozes brown liquid through holes when used on steam. How can I clean it?


Periodic Descaling of the iron will help reduce this.
Mineral deposits in the water will remain inside the iron after being converted to steam. This builds up over time as scales unless cleaned.

For descaling instruction, refer to manufacturer.

Aug 26, 2010 | Irons

1 Answer

Tefal steam iron cleaning


Hi,
Here is a tip that will help you with that problem...

Cleaning a Steam Iron Soleplate
http://www.fixya.com/support/r5301167-cleaning_steam_iron_soleplate

heatman101

Apr 24, 2010 | Tefal UltraGlide Easycord FV4256 Iron

1 Answer

Steam iron will not heat.


pry rubber feet from the bottom below the two lower screw holes there two screws under the rubber feet :)

Jul 30, 2009 | Euro-Pro Shark GI490 Iron

1 Answer

Solenoids workin, steam lines fine, but no steam


take hose off from iron end,press iron button ,breifly! keep tight hold of hose [best to put towel around hose while holding]see if steam comes out.if not hose could be blocked, then take hose from solenoid end and press button .if no steam comes out the solenoid is either faulty or the valve hole inside is blocked,turn off power and take nut off top of solenoid ,check spring and plunger for condition.the small hole may be blocked in the solenoid housing,try a needle in the hole to clear any blockage.

Jun 24, 2009 | Irons

1 Answer

I have a Black and Decker First Impressions (about 2 yrs old). When on steam it always spits out large puddles of water on the clothes as I'm ironing. It seems to come from the top or bottom part of the...


It's a possibility that you iron steam making elements are caked with lime and possibly the steam holes as well.

Purchase some "Lime Away" and dilute it 50/50 and pour it into your steam iron (drain all the old water out first and leave the iron unpluged) let sit for an hour or so and drain out, fill it again with clear water shake and drain out do this a couple of time then turn on the steam and see if it works properly, use the first time on an old towel to be sure all the chemical has been rinced out. Good Luck.

Feb 28, 2009 | Black & Decker D2030 Iron

1 Answer

My husband threw away the opereating instructions for our iron.


SELF CLEANINGIt is important to “Self Clean” the iron at least every two weeksto remove scale, calcium, etc. The harder the water, the more often the iron should be self cleaned.1. Set the variable steam control dial to any steam position.2. Fill the water tank up to the “MAX” level.3. Stand the iron on its heel. Plug the iron into the electrical outlet.4.Press the electronic temperature control button until you get the “MAX” temperature setting on the display panel and wait until the iron heats up and temperature setting light stops flashing.5. Turn the variable steam control dial all the way to the right to the self-cleaning position and hold the iron horizontally over the sink (Fig. 8).6. Boiling water and steam will now be ejected from the holes in the soleplate. The impurities and scale are washed away with it. 7. Move the iron back and forth as this happens.8. If there is any water left in the water tank after the iron stops steaming, just empty the remaining water in a sink following the instructions for emptying the iron. 9.Turn the variable steam control dial to the “0” position when the water tank is empty.10.Place the iron back upright on its heel to cool down before storing.

Nov 23, 2008 | Euro-Pro Shark GI490 Iron

Not finding what you are looking for?
Kitchen Appliances - Others Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Kitchen Appliances - Others Experts

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Irene Tulloch

Level 2 Expert

458 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Black & Decker Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...