Question about Motorola Walkie Talkie 2-Way Radio
I can talk through my motorola but i cant hear anyone talking back
Posted by Anonymous on
Check your Code setting. Both the frequency and the code must be identical for the units to communicate. Shut off any special features and keep the radios at a simple setting until you get communications back.
Posted on Jan 07, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
One of the main causes of static can be a bad battery. If you are using rechargeable batteries you need to replace them every 14-18 months. If you are using alkaline batteries, they have been known not to fully power the radio once your cross the 10 hour mark. Your radio would then be operating in somewhat of a brown out. This would lead to static.
Another cause of static is simply being nearly out of range of the other radio(s).
The burst of white noise at the end of Rx on some radios can be rather annoying. On the basic talkabout radios there is nothing which can be done to solve the problem, other than replacing the radio.
Posted on Jul 30, 2008
Check to see you have the radios set to the same frequency and interference eliminator code as one another. This would be the most likely cause.
Here is a link to the owners manual http://www.motorola.com/mdirect/manuals/T50-T55_UserGuide.pdf
Posted on Sep 27, 2008
SOURCE: t 5710 motorola talk about
Short of having a radio tech look at the radio, I would suggest looking at the grill and mic hole to see if there is dirt or debris blocking the hole.
Posted on Nov 16, 2008
Check the settings of both your interference code eliminator and your Qt filter (if your model has one). These codes need to match the other radios exactly. If the other radios have a Qt filter and your unit does not, then the Qt filter would need to be shut off on the other units.
Posted on Feb 11, 2009
Perhaps the privacy code has been changed on one of the radios? If you have a manual follow the instructions for setting the codes and make sure they are the same on both radios.
Posted on Jan 02, 2010
Tips for a great answer:
Sep 12, 2016 | Motorola Radio Communications
Apr 11, 2014 | Motorola Mobility H680 - Headset -...
Feb 18, 2014 | Motorola Talkabout FRS 250 (14 Channels)...
Jul 02, 2010 | Motorola Mobility MILESTONE Cell Phone
Jan 08, 2010 | Motorola Mobility H710 Bluetooth Headset
Nov 29, 2007 | Motorola Mobility H350 Wireless Headset
Feb 01, 2007 | Logitech (980174) Headset
179 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: