Question about Tomtom GO 300 GPS Receiver

Open Question

Start up goes through the setup and when it gets to the voice part it goes back to beginning again

Starts up as normal set time set left or right handed select voice and person them goes back to start

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 121 Answers

SOURCE: tomtom xl.... on starting unit it immediately goes to select a language and then a few more windows such as right/left handed, time display format and eventually it goes to select a voice where after

yep common error reset it or plug it in to pc and download other voice

Posted on May 04, 2009

  • 11 Answers

SOURCE: My Tomtom One keeps going

try resetting it. you can restore settings or better still get latest operating system by connecting up to internet. downloading the latest operating system and updated basic maps is free. another problem might be that the batteries are low and you may just need to connect to power source. the tomtom one is not the most powerful sat nav, it runs out of battery quickly and has very little memory (only ONE gig) but as long as you use it within its capabilities it is pretty reliable and does the basics very well.... imo
good luck

Posted on Jan 05, 2011

  • 43 Answers

SOURCE: I am having a problem with my tom tom, I have done

Have you tried a hard reset?
You may need to bring back to store, sounds like an issue with firmware.
Try firmware upgrade.

Posted on Mar 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 6 station orbit timer and I have problem with station 2 odd days coming on again after station 4 odd days the time is set to come on at 6 am and run for 60 min an10 min after it shuts off to start...


I am somewhat confused about your station numbers. How many stations do you have? What is Ihappening with stations 1, 3, 5, 6?
Regardless, this is probably what is happening.
No matter how many stations you have, YOU ONLY PUT IN ONE START TIME. That one start time begins the cycle that starts with station 1 and proceeds to the other stations based on your station RUN times.
If you have one start time of 6:00 am, and a run time of 60 minutes for each zone, then
At 6:00 am station 1 starts.
at 7:00, station 1 shuts off & station 2 starts.
at 8:00, station 2 shuts and station 3 starts, etc.
You are not programming the individual start times for each station.
If you put in more than one start time, the timer remembers and will run all stations then go back and begin again and if there is a third start time, it will begin a third time.

Gary

Sep 02, 2011 | Orbit 57882 9 Station Super Dial...

3 Answers

My tom tom one xl seems to have gone back to set up mode so i go through the options but when i get to the option for choosing a voice it freezes and then returns to the begining of set up again i have...


One of the voices you added from the computer is corrupt. Plug the tomtom back in to the computer and remove the customer voices one by one till you find the one that is corrupt. If you can't do this using the tomtom app, reply and I will find out where the files are and tell you which ones to delete from the momory.

May 20, 2010 | Tomtom ONE XL GPS

1 Answer

Downloadable drivers for VN4100pc handheld that works on 32 bit


If you have previously connected the recorder:
1. Make sure the recorder is connected correctly.
2. Open the 'System' control panel: Start menu -> Control Panel -> System.
3. Click the 'Hardware' tab and then click the 'Device Manager' button.
4. Right-click the item that shows as 'Digital Voice Recorder' and choose 'Uninstall' or 'Remove'.
5. Disconnect the recorder.

If you have the software already installed:
1. Open the 'Add / Remove Programs' (Pre-Vista/Windows 7) OR 'Programs and Features' (Vista/Windows 7) control panel: Start menu -> Control Panel -> Add / Remove Programs (Pre-Vista/Windows 7) OR Programs and Features (Vista/Windows 7).
2. Click 'Olympus Digital Wave Player' and choose 'Change / Remove' or 'Uninstall'.

Please restart the computer before reinstalling if you had connected the recorder or installed the software previously.

Digital Wave Player (2.0):
http://www.olympusamerica.com/files/DigitalWavePlayer.zip
SAVE to the desktop
RIGHT CLICK on the DigitalWavePlayer.zip and LEFT CLICK on EXTRACT ALL
CLICK on NEXT, Then NEXT again, Then FINISH
After unzipping the file, click on the SETUP.EXE file to begin installation.
Download update 2.1.4:
http://olympusamerica.com/files/DigitalWavePlayerUpdate214.zip
SAVE to the desktop
RIGHT CLICK on the DigitalWavePlayerUpdate214.zip and LEFT CLICK on EXTRACT ALL
CLICK on NEXT, Then NEXT again, Then FINISH
After extracting the file, click on the SETUP.EXE file to begin installation.

For 64-bit systems, save the driver to the desktop and run the installation within it:
http://www.olympusamerica.com/files/oima_cckb/VNSeries64Driver.zip

Mar 10, 2010 | Olympus VN-4100PC Digital Voice Recorder

1 Answer

I have just changed my laptop with windows 7 but i think i need a driver to update my olympus vn-4100pc is there one


If you have previously connected the recorder:
1. Make sure the recorder is connected correctly.
2. Open the 'System' control panel: Start menu -> Control Panel -> System.
3. Click the 'Hardware' tab and then click the 'Device Manager' button.
4. Right-click the item that shows as 'Digital Voice Recorder' and choose 'Uninstall' or 'Remove'.
5. Disconnect the recorder.

If you have the software already installed:
1. Open the 'Add / Remove Programs' (Pre-Vista/Windows7) OR 'Programs and Features' (Vista/Windows 7) control panel: Start menu -> Control Panel -> Add / Remove Programs (Pre-Vista/Windows 7) OR Programs and Features (Vista/Windows7).
2. Click 'Olympus Digital Wave Player' and choose 'Change / Remove' or 'Uninstall'.

Please restart the computer before reinstalling if you had connected the recorder or installed the software previously.

Digital Wave Player (2.0):
http://www.olympusamerica.com/files/DigitalWavePlayer.zip
SAVE to the desktop
RIGHT CLICK on the DigitalWavePlayer.zip and LEFT CLICK on EXTRACT ALL
CLICK on NEXT, Then NEXT again, Then FINISH
After unzipping the file, click on the SETUP.EXE file to begin installation.
Download update 2.1.4:
http://olympusamerica.com/files/DigitalWavePlayerUpdate214.zip
SAVE to the desktop
RIGHT CLICK on the DigitalWavePlayerUpdate214.zip and LEFT CLICK on EXTRACT ALL
CLICK on NEXT, Then NEXT again, Then FINISH
After extracting the file, click on the SETUP.EXE file to begin installation.

For 64-bit systems, save the driver to the desktop and run the installation within it:
http://www.olympusamerica.com/files/oima_cckb/VNSeries64Driver.zip

Feb 21, 2010 | Olympus VN-4100PC Digital Voice Recorder

1 Answer

Still need driver for Olumpus VN-4100pc for xp


If you have previously connected the recorder:
1. Make sure the recorder is connected correctly.
2. Open the 'System' control panel: Start menu -> Control Panel -> System.
3. Click the 'Hardware' tab and then click the 'Device Manager' button.
4. Right-click the item that shows as 'Digital Voice Recorder' and choose 'Uninstall' or 'Remove'.
5. Disconnect the recorder.

If you have the software already installed:
1. Open the 'Add / Remove Programs' (Pre-Vista) OR 'Programs and Features' (Vista) control panel: Start menu -> Control Panel -> Add / Remove Programs (Pre-Vista) OR Programs and Features (Vista).
2. Click 'Olympus Digital Wave Player' and choose 'Change / Remove' or 'Uninstall'.

Please restart the computer before reinstalling if you had connected the recorder or installed the software previously.

Digital Wave Player (2.0):
http://www.olympusamerica.com/files/DigitalWavePlayer.zip
SAVE to the desktop
RIGHT CLICK on the DigitalWavePlayer.zip and LEFT CLICK on EXTRACT ALL
CLICK on NEXT, Then NEXT again, Then FINISH
After unzipping the file, click on the SETUP.EXE file to begin installation.
Download update 2.1.4:
http://olympusamerica.com/files/DigitalWavePlayerUpdate214.zip
SAVE to the desktop
RIGHT CLICK on the DigitalWavePlayerUpdate214.zip and LEFT CLICK on EXTRACT ALL
CLICK on NEXT, Then NEXT again, Then FINISH
After extracting the file, click on the SETUP.EXE file to begin installation.

For 64-bit systems, save the driver to the desktop and run the installation within it:
http://www.olympusamerica.com/files/oima_cckb/VNSeries64Driver.zip

Feb 19, 2010 | Olympus VN-4100PC Digital Voice Recorder

1 Answer

Tom Tom one reset itself and now stuck on language


firstly don't use tina when you're done with the setup change the voice to Tina again
or download TomTom Home 

Apr 20, 2009 | Tomtom ONE XL GPS

2 Answers

845gvsr startup problem


Try changing the CMOS Battery, Are you sure you are putting the jumper on the right pins, what happens if you save and exit bios without changing the jumper back, you may be resetting the CMOS with the jumper. does the clock keep accurate time if you leave the jumper on so you can get into the BIOS after turning PC off unplugging power then plug back in and check time in BIOS, if it is not keeping time, you may have a bad battery

Mar 28, 2009 | Intel D845GVSR Motherboard

1 Answer

How do I rewind


by just pressing the rewind button, it goes to beginning. by press and holding down the rewind button, it will start rewinding slowly and get faster the longer it is being held down.

Jan 20, 2009 | Olympus WS-300M Digital Voice Recorder

3 Answers

Olympus DS30 voice recorder play speed issue


Hi, the solution to the problem seems to be the following. When u press play, once, you get 1x play. If whilst playing you press play a second time the DS-30 goes into slow play mode, and if you press a second time it goes into fast mode. For those of us who accidentally went into either fast or slow mode, just press the play button again, during playback, until "play" appears on the LCD screen. Apparently it is as simple as that.

Mar 03, 2008 | Olympus DS-30 Digital Voice Recorder

Not finding what you are looking for?
Tomtom GO 300 GPS Receiver Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tomtom GPS Experts

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Tomtom GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...