Question about Avaya 9608 IP Deskphone

Open Question

How do i reconfigure the ip address timeouts

Need to know how to reconfigure the timeout IP settings for this phone

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Avaya 5610 IP Phone

Press mute reset (mute 73738)

Posted on Oct 21, 2008

  • 10 Answers

SOURCE: Avaya assighning New static IP address after IP address conflict

If you need to reconfigure the phone press "mute"RESET# where the alphabets correspond to the digits button they appear against on phone. E.g. for R press 7... and so on ..... then the phone will ask reset values? press # to reset and reboot the phone. Then key in the correct IP address for phone .... call server IP address ... router .. files server .... VLAN ID etc ....

If all the settings are done correctly ... and if the phone gets the reach ability to the call server it will work fine...

if you are unsure of these settings.... go to the menu and network options of any working phone and get the correct values from there

Posted on Apr 02, 2009

  • 10 Answers

SOURCE: How to configure Avaya's IP Phone 5610?

Ensure the reachability of the call server from that port. To ensure the same, configure a laptop with the IP address and default gateway of the intended IP phone. Then try pinging the call server from the laptop.

If this works then the setting should work for IP phone too. Double check on the router IP address and Vlan ID configured on the phone.

Posted on Apr 02, 2009

dopefinger
  • 79 Answers

SOURCE: group paging on an ip office on ip sets

using manager application, go to hunt groups, one of them will be the paging group,, make sure all that you want to page are added in the group and the box next to each one is checked

Posted on May 29, 2009

SOURCE: phone going to DHCP mode

You probably need to change the text file that gives the phone its information.

Get a new 46xxsettings.txt file from the avaya website and replace the one in your directory.

Posted on Oct 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a D link airplus xtreme 2100 AP Im set the option in LAN Dinamic DHCP, after that I cant conect trhougt browser, I used the Xtrem G AP Manager , IP address is 0.0.0.0 Net mask 0.0.0.0, I am...


Under Windows 7, press the "Start" button.
Type 'cmd' into the search-box, and press ENTER.
Type 'ipconfig /all', and press ENTER.
Look for the IP-address for the "gateway" (or "DHCP-server").
Type that IP-address into your web-browser.

Aug 24, 2011 | D-Link AirPlus Xtreme G DWL-2100AP...

1 Answer

How to connect to my PIX 501 and use Windows Remote Desktop?


Here's a real simple problem to your remote access problems.
Go to: http://www.logmein.com
Sign up for a free acct, download/install their free software on your Server.
Now go over to your laptop, login to your new logmein acct.
In the next page, you'll see your Server listed. Click on it - follow instructions to connect.
This will tunnel through whatever stuff you have on your network!
Trust me - esp. in your scenario, this is *by far* the *simplest remote connect you'll ever perform! And it just .... works! Everytime.

gurutim

Mar 16, 2009 | Cisco PIX 501 Firewall

2 Answers

Pix 515 E allow few websites only.


Do the nslookup for the three websites and write an access list to permit the traffic only to the said website ip addresses

Eg.

1. go to dos prompt

2. type "nslookup"

3. type "www.rediff.com

Note : You will get the ip address of the websites

4. Create an object group for these websites

5. Add ip addresses of the websites

6. create an access-control list element to permit the traffic from your circle office to this object group for port tcp 80 and 443

You are done

Mar 09, 2009 | Cisco PIX 515E Firewall

1 Answer

Can not send or receive multimedia messages.


Maybe internet is shut off on your phone?
Here are the internet settings for Cingular: Internet Setting Cingular:
Profile Name: Cingular
GPRS setting:
APN: wap.cingular
User Name: WAP @ CINGULARGPRS.COM
Password: CINGULAR1 (ALL UPPERCASE)
Time Out: Off
Primary Gateway IP: 66.209.11.61
Port: 9201
Secondary Gateway IP: 0.0.0.0
Port: 0
DNS Server:BLANK
CSD setting:BLANK
Dial in number NONE
Query at Logon: (NO CHECK MARK)
User Name
Password
Baud Rate Auto
Line Type: ISDN
Time Out Off
DNS Server:
Then go to your browser and enter the following settings:
Profile Name: MEdia Net
Homepage: device.home
Network Link: Cingular
MMS Settings:
Profile Name: MMS over HTTP
MMSC: http : //mmsc.cingular.com/ (No Spaces)
Max Sending Size: 30K
Network Profile: Cingular


and T Mobile: Internet Setting T-Mobile
T-MobileWeb Settings:
Primary IP Address: 216.155.165.050
Secondary IP Address: (Blank)
Access Point Name (APN): wap.voicestream.com
Data Bearer: GPRS
Profile Name: GPRS
Username: (Blank)
Password: (Blank)
Home Page: http://wap.myvoicestream.com
Picture Messaging Settings:
Multi-Media Service Center (MMSC) Address: http://216.155.174.84/servlets/MMS
Validity Period: 72 hours
Hide ID option (if option exists): set to off, no, or disabled

and Fido: Internet Setting FIDO
Profile name: FidoWAP
GPRS setting:
APN: wap.fido.ca
Username: fido
Password: fido
Timeout: 15 minutes
Primary Gateway IP: 205.151.11.11
Port 8080
Secondary Gateway IP: (blank)
Port: (blank)
DNS Server: (unchecked)
CSD Setting:
Dial in number: (blank)
Query at logon: (unchecked)
Username: (blank)
Password: (blank)
Baud Rate: Auto
Line type: Modem
Timeout: Off
DNS server: (unchecked)
Then press Save.
To get MMS working (what I haven't included are the blanks and all boxes should be unchecked unless specified)
Setup-->Data Network
Profile Name: Fido MMS
APN: mms.fido.ca
Username: fido
Password: fido
Timeout: 15 minutes
Primary Gateway IP: 205.151.11.13
Port: 8080
Baud Rate: Auto
Line type: Modem
Timeout: off
Then click SAVE.
THEN
Messages-->Service Setup-->Multimedia Message
Default profile: FidoMMS
(all other settings are to your preference)
Tap the box beside Default Profile and ensure that FidoMMS is the default profile.
Settings for MMS profile goes
Profile name: FidoMMS
MMSC: http://mms.fido.ca
Max Sending Size: (your preference)
Network Profile: Fido MMS

and Rogers: Internet Setting Rogers
Proxy Name: Rogers MMS
Proxy Address: 172.25.0.107
Access Point: Rogers MMS
Home: ((Set whatever page you like here))
Port Number: 8080
Authentication Type: HTTP-BASIC
User Name: media
Password: mda01
Access Point Name: Rogers MMS
APN: media.com
Authentication Type: PAP
User Name: media
Password: mda01
DNS: <>
Linger Time: 180
MMS Accounts (Main Menu -> Messaging -> Messaging Settings -> MMS Settings)
Profile Name: Rogers MMS
Proxy: Rogers MMS
Relay Server URL: http://mms.gprs.rogers.com


Feb 19, 2009 | LG Shine KE970 Cellular Phone

1 Answer

Configure tcp ip hp 750c


Assuming the JetDirect card is installed and properly functioning, use the following. Also, you may have to update the rom on the I/O Card to the latest version.


  1. From the front control panel message, Ready or Ready to Plot, press ENTER.
  2. Press the Up arrow key until I/O Setup appears, and then press ENTER.
  3. Press the Up arrow key until Modular appears, and then press ENTER.
  4. From the front control panel message, Cfg Network=No, press ENTER.
  5. Press the Up arrow key to change to Yes, and then press ENTER.
  6. Using the Arrow keys, scroll to Cfg TCP/IP=No appears, and then press ENTER.
  7. Scroll to Yes, and press ENTER.
  8. Press the Up arrow key until BootP=Yes appears, and press ENTER.
  9. Press the Up arrow key to change to No. Press ENTER (When using BootP or DHCP, keep the setting BOOTP = YES *. The BootP or DHCP server will configure the TCP/IP parameters on the HP Jetdirect. No other TCP/IP configuring is necessary.
  10. Press the UP arrow once to get to the IP byte section.
  11. To change the IP byte, proceed as follows:
    1. Press ENTER.
    2. Press the Up or Down arrow key to change the number.
    3. Press ENTER.
    4. Press the Up key to continue to IP Byte2=xxx.
    5. Press ENTER.
  12. Configure the remaining bytes of the IP address in the same manner. A valid IP address is required for proper operation.
  13. Configure the subnet mask bytes (SM), syslog server IP address (LG), default gateway (GW), and timeout (TIMEOUT) by pressing the ENTER and the Up or Down arrows in the same manner as above. The timeout parameter default is 90 seconds. Up to 3,600 seconds can be configured. If set to zero, the timeout feature of the HP Jetdirect print server is disabled; TCP/IP connections will remain open until closed by the server.
  14. Press PREVIOUS repeatedly, until the Ready to Plot or Ready message appears. Refer to the HP Jetdirect Network Interface Configuration Guide to configure the network operating system.
  15. Press the Up and Down arrow keys simultaneously to save the IP address on a 750/755 plotter. (A page should print and the IP addresses will be saved.)

Nov 19, 2008 | HP Jetdirect J2552A/B (J2552AB) Print...

1 Answer

Accessing the Linksys Wireless-G camera


make sure the same has a static IP address
Upgrade the firmware if required and reconfigure the camera

Oct 09, 2008 | Linksys Wireless-G Wireless Network...

2 Answers

HTC P3400i


Hopefully you mean the south of the USA if so here you go

GPRS Web Session:
Homepage: http://172.23.1.135:8080/cellularone.wml
Service Type 1: WAP
Gatewap IP 1: 172.23.1.252
Port 1: 9201
Service Type 2: WAP
Gateway IP 2: 172.23.1.252
Port 2: 9201
Timeout: 15 minutes
GPRS APN: cellular1wap

MMS Web Session:
Homepage: http://www.openmobilealliance.org/
Service Type 1: WAP
Gateway IP 1: 172.23.1.252
Port 1: 9201
Service Type 2: WAP
Gateway IP 2: 172.23.1.252
Port 2: 9201
Timeout: 15 minutes
GPRS APN: cellular1wap

Aug 26, 2008 | HTC Touch Cell Phone (Unlocked) - Soft...

1 Answer

Cisco asa5505 problem


You seem to have the last resort (o.o.o.o) set to VLAN1 which is set as an inside interface.
Is VLAN1 connected to the outside router or internet backbone?
If not, change the last resort to the outside Ethernet port.

Apr 16, 2008 | Cisco ASA 5500 Firewall

1 Answer

Connecting via cable broadband


sometimes, it's necessary to turn the modem off overnight, with cable modem folks, so that the IP address can reconfigure..weird, but true..

also, you may want to go to settings, and automatically set the address, instead of using the dedicated IP approach.

check your warranty for FREE here

Feb 23, 2008 | Computers & Internet

1 Answer

Duplicate/incorrect MAC addresses in the CAM table


This is from the Cajun P333R manual but it should be very similar if not identical.

Good Luck.

arp timeout Command
Use the arp timeout command to configure the amount of time that an entry
remains in the ARP cache. To restore the default value, 14400, use the no form of
this command.
The syntax for this command is: arp timeout <seconds>
The syntax for the no form of this command is: no arp timeout <seconds>
Examples:
To set the arp timeout to one hour:
Router(configure)# arp timeout 3600
To restore the default arp timeout:
Router(configure)# no arp timeout
ip-address IP address, in dotted decimal format, of the station
hardware-address 48-bit address of the local data link
seconds The amount of time, in seconds, that an entry
remains in the arp cache.

Nov 09, 2007 | Lucent Cajun P333T Networking Switch

Not finding what you are looking for?
Avaya 9608 IP Deskphone Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Avaya Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you an Avaya Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...