When i on yahoo and open my cam after 2 or 3 minute
When i on yahoo and i on my cam after 2 or 3 minutes it give some eroor and my yahoo also closed and then i need to again on my yahoo and second also tell me a good model of a4tech that i can purchase in a normal rate and its cam result is wondurfull i like a model in which it looking like a globe it was very good model
An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: when i on yahoo and open my cam after 2 or 3 minute
See section B. YahooMessenger in the info below to setup the Audio & Video. Also send this to your family
and friends so they have their computer setup properly. Web Camera’s have to be
setup on the program they are to be used with.Just installing the camera on your computer does not set it up to
broadcast on messengers or Skype.
Each program has Options that have to be setup in order for
the Audio and Video to function properly. A.Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/)
set it up as follows:
Go to Tools,
then Options, and click on Audio Settings and set the Microphone
and Speakers to the computer Audio Card.
click on the Video Settings.
camera if Installed Properly will come up and show a video picture.
on the bottom of the page click on Save.
The camera and audio should function properly.Your friends and Family will now be able to
see and her to you. B.Yahoo Setup:
After downloading and installing Yahoo Messenger(http://ca.messenger.yahoo.com/download/
) set it up as follows:
on Messenger at the top left and then go down to Preferences
and then the Preference Window will come up.
click on Calling and Devices. In the Calling & Devices
on the right and set the Microphone and Speakers to the computer
Audio Card or sound device installed in the computer.
below that, go to the Test Audio section and(in blue writing) click on“Open the call setup assistant”
and follow the instructions on the left window.
after completing the Audio Setup, go to down and click on Webcam it
should BRODCSAST and you will see your picture.
Chat, click on MESSENGER and then
make necessary settings, click on APPLY, then OK.
click on MESSENGER and go to my WEBCAMready to use.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Press and hold the light button for 10 seconds. (Upon pressing the light button, the lights will immediately turn off and come on 10 seconds later.)
Deactivate the Light Feature
Close the garage door.
Start with the garage door opener lights "OFF".
Press and hold the light button for 10 seconds. (Upon pressing the light button, the lights will immediately turn on and go off 10 seconds later.)
Press the Light button to turn the opener light on or off. It will not control the opener lights when the door is in motion. If you turn it on and then activate the opener, the light will remain on for 4-1/2 minutes. Press again to turn it off sooner. The 4-1/2 minute interval can be changed to 1-1/2, 2-1/2, or 3-1/2 minutes as follows:
Press and hold the Lock button until the light blinks (about 10 seconds).
A single blink indicates that the timer is reset to 1-1/2 minutes.
Repeat the procedure and the light will blink twice, resetting the timer to 2-1/2 minutes.
Repeat again for a 3-1/2 minute interval, etc., up to a maximum of four blinks and 4-1/2 minutes.
discovered the hard way- ($85.00 later) Step 1: turn key to "on" position. step 2: open driver door. (security light should be flashing on and off) step 3: wait ten minutes with key in "on position and driver door open. step 4: when 10 minutes is up-(youll know-because security light will have stoped flashing after 10 minutes) close driver door ,turn key to "off" position, then turn key "on" to start. drives me crazy!! I have to do it to mine sometimes 2-5 times a day! GM doesnt have a fuel reset button etc. like fords do.