Question about Hitachi Interactive Whiteboard FXTRIO77

Open Question

My htachi starboard says there is something on the surface and that it is not connected. I have tried realignment and re intalling of software. any suggestions?

I get a message that it is not connected. It also says there is something on the touchboard or that the camera is not aligned. I have tried the alignment process but no help.

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: StarBoard Fx-77 Pen does not write on the boards surface

i dont know why i bother looking on here, ive looked for a number of solutions for different problems and there is never any answers on here

Posted on Dec 03, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

"alignment failed" message. Prints


First, try power cycling the printer (Turn it off, wait 5 sec, turn it on). If this does not resolve the issue, try removing the cartridges and reinserting them carefully.

May 05, 2011 | HP Officejet Pro L7780 All-In-One InkJet...

1 Answer

Align Screen stuck in loop after hard reset and clean


Hello, I could be able to diagnosticate your problem but first I need to know some more details. At the current state, can your pda be connected to active sync ? (you may try using it's cradle or usb cable) Can you manage to pass in some way of the align screen message? Does the screen respond to taps? When you tap the screen trying to callibrate does the cursor moves or does something? Please try to explain these questions and I'll be back with an answer as soon as possible. Thanks for understanding.

Jun 12, 2007 | Dell Axim X51v Pocket PC

1 Answer

Orange light appears on touchboard and a circle with a line through shows up on screen and touchboard wont work


It means that you locked your mouse pad all you have to do is tap the left corner (where the orange light is) twice. THis unlocks it and locks it

Jan 17, 2011 | Compaq Presario CQ60-212US Notebook

1 Answer

Have a canon rebel EOS 20D that registers an error 99 after I take one frame and then won't allow another one to be taken until I turn camera on then off again. Does this require factory repair or is there...


Hi LLFraserny,
You can probably try to isolate the error 99 first.
To isolate the cause of the issue, do the following:
1. Turn off the camera.
2. Remove the lens, battery, and CF card.
3. Allow the camera to sit without power for approximately 30 minutes.
4. Insert a fully charged battery, and turn on the camera.
5. Depress the shutter button as you would to take a picture.
Does the “ERR 99′ message appear? If it does, then the camera will need to be serviced. If the message does not appear, then please proceed to the next set of steps:
1. Turn off the camera.
2. Insert the CF card.
3. Turn on the camera.
4. Format the CF card in the camera.
5. Depress the shutter button as you would to take a picture.
Does the “ERR 99′ message appear? If so, then the CF card is the most likely source of the issue. Try using a different card.
If the message does not appear, please complete the following steps:
1. Turn off the camera.
2. Clean the lens contacts by gently rubbing them with a pencil eraser or soft cloth. Be careful that you do not let any debris fall into the camera body.
3. Reattach your lens.
4. Turn on the camera.
5. Depress the shutter button as you would to take a picture.
If the “ERR 99′ message only appears when one particular lens is
attached, then that lens should be examined by a service technician.
If you see the “ERR 99′ with a different Canon lens attached, then the camera should be serviced.
One last item to check before sending camera to Canon service is the alignment of the shutter. Life the mirror and visually inspect the shutter curtain. If each segment is not completely straight, touch it lightly with your blower bristles and try to pop it back into alignment.

Hope this helps,
Andrew

Apr 09, 2010 | Canon Photography

2 Answers

Bug with the DMC-FS5"please turn camera off and then on again"


Hi!
It sounds like the lens focus is stuck - could be sand, dirt or mechanical impact received. I'm afraid you will have to give it away for a repair - it's not a software problem, but hardware.
I have repaired a lot of Lumix cameras with this problem.

Hope this helps!

Tom

Jul 30, 2009 | Panasonic Lumix DMC-FS5 Digital Camera

1 Answer

Cannot download my photos to my computer any longer


I CANNOT DOWNLOAD PICTURE FROM MY CANON DIGITAL IXUS 8OOIS IT KEEP TELLING ME THERE ARE NO PICTURES WHILES ARE PICTURE ON THE CAMERA.

Nov 28, 2008 | Cameras

1 Answer

Dell 964 printer is only printing grey bars


My printer has stopped printing anything but grey bars. I got a message saying that something was wrong with the alignment. could you help me?

Aug 23, 2008 | Dell Photo 964 All-In-One InkJet Printer

2 Answers

Device not ready message


I had the same problem trying to transfer pics from my camera. The error message is "The Device is not Ready." I got mad when I read the "solution" from the "plumber" that said to read the directions. DUH!. Now for the real solution... and reading the directions won't help. Your PC is trying to find the camera connected to a specific drive. In my case it was the "E" drive which was already in use, mapped to a shared drive. Once I disconnected that drive it fixed my problem. To disconnect, highlight the drive, go to Tools and Disconnect Network Drive. Reboot the PC and plug the camera in before booting back up. (If you have hardware connected to the drive, right mouse click on the drive and eject.)

Dec 25, 2007 | Olympus FE-200 Digital Camera

1 Answer

Downloading photos to pc after connecting to a mac


Chances are you have some other program running on your system that's access your camera so that no other program can access it./ check all your start up items

Oct 13, 2007 | Canon PowerShot S3 IS Digital Camera

2 Answers

A500 Zoom Error


Your lens assembly has become jammed due to impact or contamination. You can try GENTLY manipulating the extended lens using slight side to side pressure and twisting motions back and forth. Sometimes this will free a component which has jammed out of alignment. Be VERY careful you can easily damage the lens further if you do not use extreme caution. If this method is going to work it will take minimal force to free the components. If this does not work you will need to find a service center to take the camera apart and re-set the internal components in the proper alignment. David Millier Advance Camera Repair

Feb 24, 2007 | Fuji FinePix A500 Digital Camera

Not finding what you are looking for?
Hitachi Interactive Whiteboard FXTRIO77 Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Computers & Internet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you a Hitachi Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...