Question about Xerox Phaser 6125 Laser Printer

1 Answer

Paper jam at exit

Trying to print on 8.5x14 decal paper. Thickness equiv to card stock. Sometimes works, many times jams at exit. Paper jamming and crumpling at exit. Very expensive paper. Help

Posted by on

  • Wilma Willey
    Wilma Willey Apr 01, 2014

    Last jam paper was stuck to red roller in fuser.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 77 Answers

Have you set the tray to thick cardstock in the printer?
If not try that. This will let thicker paper go through more easily.
Make sure you bot have the tray as the printjob set up as the same type of paper.
How much does the paper weigh?
Also try printing from the manual feed. You're paper path is shorter that way and easier for the printer to handle.
Does it only jam on this type of paper?
Might be a fuser easy but don't think that's the case with this one.

Posted on Apr 01, 2014

  • 4 more comments 
  • Wilma Willey
    Wilma Willey Apr 01, 2014

    Sticks both manual and tray. Thick glossy setting and glossy setting.

  • Wilma Willey
    Wilma Willey Apr 01, 2014

    Product is much like photo paper

  • Xerox help Apr 01, 2014

    can you see if that roller is damaged? let it cool down first!

  • Wilma Willey
    Wilma Willey Apr 01, 2014

    It has a small nick in it but the paper is sticking to the roller from one end to the other.

  • Jan Siebrecht
    Jan Siebrecht Apr 02, 2014

    Does the 'paper' meet the specs? Your remark suggests it might be melting to the red roller.

  • Jan Siebrecht
    Jan Siebrecht Apr 02, 2014

    Paper leading edge in the fuser is supposed to willingly bend and follow the guiding rubs to the exit. In case of problems there, it either: - bends to much by the heat and hits the lower guiding ribs too squarely to follow the ribs to the exit rollers, or - is too stif to bend, and needs, close to the left and right ends an extra ' finger like there is in the center, pressing the leading center down. This might be constructed from a paperlclip, fixed at the top plate. In the second case the springloaded top plate might be lifted by the leading edge of the stif (thick) leading edge. Putting some extra weight on this plate might solve it.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am positive there is no paper jam with my printer (Z2420) but message of paper jam still appears and it won't let me clear it.


Sometimes a very small piece of paper can still be in the printer paper path after clearing a jam especially if the paper tears while removing the jam. The piece of paper may be too small to notice. Try blowing out the paper area with compressed air. Other causes could be the thickness of paper you are trying to print on, ie photo paper, thicker bond paper. Make sure the print settings match the paper thickness. I have a Lexmark laser printer, and I will get feed problems if the settings are not set for the correct paper type.

I hope this helps.

Alex

Feb 10, 2015 | Lexmark Z2420 USB 2.0/ 802.11g Wireless...

1 Answer

Paper jam at exit


Besides setting it for card stock both in its internal menu and the pc's menu, are you setting it for legal size paper? The timing will be thrown off if that step is missed. It will stop pulling the paper because it is looking for 8.5 x 11" paper. I would test with less expensive card stock to also make sure a shard of the decal paper did not get left in the paper path. The card stock should help dislodge any debris in the paper path.

Apr 01, 2014 | Xerox Phaser 6125 Laser Printer

1 Answer

Trying to print on card stock paper and get a paper jam Is there a setting for printing on card stock paper?


Hi Fuller90

Read your issue.
1. Kindly check the thickness of the paper. If the thickness of the paper or the card is more then normal paper, you will experience the paper Jam on this printer model.
2. You can try this step..... Take the Power cable out from the printer.
3. Press and hold down the power button for 35 seconds.
4. Now release the button and then plugin the power cable.
5. Check your issue.

Aug 20, 2010 | HP PSC 1350 All-In-One Thermal Printer

1 Answer

Photo paper jam what thickness of photo paper should i use for a hp photosmart 8250 i keep getting jammed up and think the paper is to thick


Be sure and check the printing properties before printing. make sure that you specify the kind and thickness of the paper. This way the printer expects that thickness when printing. Sometimes, glossy paper makes the printer jam easily. Try putting around 25 regular paper on bottom of special paper and see if that helps.

Sep 13, 2009 | HP Office Equipment & Supplies

1 Answer

PIXMA MP450 alarm light is on and it says paper is jammed but there isnt any jammed, please help?


Hello,

You could try this, but there is no guarantee. There are a lot of sensor in the paper path of a Canon printer. When these sensors get stuck in the up position, pushed up when paper is present, you get the paper jam alarm when no paper jam is present.

The trick to try that sometimes works is to run some index card stock through. Insert the index card stock in the paper tray, run a print test and as it runs put some gentle firm pressure on the card stock to ensure it travels smoothly. Once it is done the sensor may have reset itself. In lieu of card stock you can use a thick magazine cover and cut it to size of an 81/2 x 11 piece of paper.

If this works great. If it doesn't let me know and please don' t bother to rate this if it fails. It works some of the time and not most of the time.

Thanks,
Worldvet

Nov 20, 2008 | Canon Office Equipment & Supplies

1 Answer

Paper jam, so small, can't even see paper


first off, unless you know that the paper is there, it's a possibility your machine is just saying or acting as if there is a jam when actually there is something giving a false reading or a failed part rendering it unable to print. Otherwise, if you happen to know where there paper is jammed at, attempt forcing a heavier stock paper through. say the jam is between two rollers attempt pushing a cardstock or index card thickness of stock through the rollers to attempt pushing the paper backward which might either remove the jam and make it removeable elsewhere, or make it so the machine can try to feed the paper through again this time allowing you to reach it.

Oct 28, 2008 | HP Computers & Internet

1 Answer

Wont print on card stock, legal paper- keeps jamming


Menu> scroll to Paperhandling> MP Tray type>>(plain) try changing this to cardstock  <enter>
instead of MP Tray type do the same for Cassette if you desire....
Best, danakadan

Oct 11, 2008 | Kyocera FS-1030D Laser Printer

1 Answer

T642 Paper Jam and Check paper stock jamming.


You need to change the paper type when using card stock, plain etc.
As for the paper jams; you need to check the exit sensor at the exit door, also if you have a duplex, 2-3 drawer you also need to check for jams.

Sep 08, 2008 | Lexmark T642 Laser Printer

2 Answers

Paper keeps jamming


To print card stock you must us the manual slot in the front of the printer and feed one at a time. Also open the back flap door so the card stock can exit out the back instead of trying to bend around for the try. That will give you the staight paper path that your thick stock needs.

Jul 08, 2008 | Brother HL 1440 Laser Printer

Not finding what you are looking for?
Xerox Phaser 6125 Laser Printer Logo

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Michel

Level 2 Expert

97 Answers

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

72 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...