Question about Xerox ColorQube 9303 Printer

Open Question

The printer saying code error 093-331

Xerox 7132

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2072 Answers

SOURCE: fault code 010-333 xerox 7132

Most likely you will have to have the fuser replaced. That is an overheat problem. You may just have a piece of paper wrapped in the fuser shutting it down. You can open the left hand drawyer adn remove the fuser , check inside it and put it back in and see if that clears.
But, more than likely you will have to put in a new fuser.

Posted on Aug 13, 2008

Ad
  • 239 Answers

SOURCE: xerox 7132 noise when picking up paper from bypass

On this model, sounds like the clutches are bound up in the bypass feeder.
These gears are in constant motion with other gears in rotation in the copier.

The mechanical gears on the bypass feeder need to be disabled. The machine cannot be used. The work is involved in order to do this repair job.

If all else fails, Place a service call to Xerox for repairs before other gears get broken, then major problems can occur.

Posted on Oct 26, 2009

  • 92 Answers

SOURCE: xerox work center 7132 will not boot up. error

Try to unplug the device directly from the socket wall and leave it for 5min. Plug in again. If message still occour it could be related to 2 reasons.
1. Sensor problem leading to "ghost" message -- require eng.
2. Toner replacement also causes this message.

Even if you do couple of boot routines you might want to have someone onsite to have a look at it. It might require parts.

Posted on May 05, 2010

duane_wong
  • 6826 Answers

SOURCE: The Windows 7 mini drivers for the Xerox 7132 only

http://www.support.xerox.com/go/results.asp?Xlang=en_US&XCntry=USA&prodID=WC7132&ripId=&Xtype=download

The above is the XP Vista drivers for the 7132.

The 7232 is a totally different machine and the windows 7 drivers for it will not work with your 7131 according to their table.

Also, according to Xerox's table, windows 7 drivers are definitely not available for the 7132. The latest drivers are for Vista, but that's not necessarily a bad thing, because windows 7 can run vista programs in its compatibility mode, or many times it works alright after downloading and installing the vista drivers.

Hope this helps!

Posted on Jul 14, 2010

emissionwiz
  • 76846 Answers

SOURCE: 089-311 error code for xerox copier #7132

The problem is the ibt belt sensor is not reading the silver patches on the edge of the ibt belt. They are either scratched or the sensor is dirty or faulty. Replace patches and clean or replace ibt belt sensor

Posted on May 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to clear error 10-333 on xerox 7132 all in one


That error signifies a fuser problem where the thermistor does not detect the fuser coming to temperature. Need to replace fuser unit, part number 008R13022, see link.

http://www.iteminconline.com/008r13022_008r13022-xerox-workcentre-7132-fuser-110-volt.htm?source=froogle&gclid=Cj0KEQjw8u23BRCg6YnzmJmPqYgBEiQALf_XzZg4C5Qd7jYhL14rJSJWIPdkZdVrtP4kPg2RlOQFweIaAnzV8P8HAQ

Apr 26, 2015 | Xerox Office Equipment & Supplies

1 Answer

How do i get get rid of 010-330 code on a xerox 7132


We encourage you to use our knowledgebase, MRC Smart Technology Solutions is here to help! We offer a program to cover up to 3 printers of any manufacturer for an entire year!
We can solve your problem!
Email patrick@mrc360.com for more info. Solutions for : Fault Code 010-330: The Fuser Motor is Not Rotating at the Specified SpeedMessage Related Fault Code: 010-330 Solutions ranked by relevance:
  1. Power the Machine Off and On
  2. Remove and Re-install the Fuser
  3. Replace the Fuser
http://www.support.xerox.com/SRVS/CGI-BIN/WEBCGI.EXE?St=468,E=0000000000016144604,K=4237,Sxi=2,Case=obj(3468)

Oct 07, 2014 | Xerox Work center 7132 copiers

1 Answer

I have changed the image drum i now have error 092-310


This code indicates a failure in the ADC Sensor circuit. Fixing it does not seem to be for the faint of heart . If you are feeling brave check out this thread:

http://www.copytechnet.com/forums/xerox/21835-xerox-7132-error-code-092-310-a.html

Sorry I could not offer you a definative solution directly.

Oct 31, 2013 | Xerox 6500/N Phaser Laser Printer

1 Answer

Xerox 7132 printing dots after 35 pages


Check if it is with just one document or with all documents. Can also be coming from the job and not the printer

Apr 07, 2013 | Xerox WorkCentre 7132 Multifunction Color...

2 Answers

089-311 error code for xerox copier #7132


The problem is the ibt belt sensor is not reading the silver patches on the edge of the ibt belt. They are either scratched or the sensor is dirty or faulty. Replace patches and clean or replace ibt belt sensor

May 01, 2012 | Xerox Office Equipment & Supplies

1 Answer

The Windows 7 mini drivers for the Xerox 7132 only provide a limited feature set. If I install the Windows 7 driver for the Xerox 7232, will it work with all features on the Xerox 7132?


http://www.support.xerox.com/go/results.asp?Xlang=en_US&XCntry=USA&prodID=WC7132&ripId=&Xtype=download

The above is the XP Vista drivers for the 7132.

The 7232 is a totally different machine and the windows 7 drivers for it will not work with your 7131 according to their table.

Also, according to Xerox's table, windows 7 drivers are definitely not available for the 7132. The latest drivers are for Vista, but that's not necessarily a bad thing, because windows 7 can run vista programs in its compatibility mode, or many times it works alright after downloading and installing the vista drivers.

Hope this helps!

Jul 14, 2010 | Xerox WC7232 Printer

1 Answer

Xerox work center 7132 will not boot up. error code (092-310). It says shut down printer and turn it back on. but i did that cuople of times still the same error code. it says contact service if error...


Try to unplug the device directly from the socket wall and leave it for 5min. Plug in again. If message still occour it could be related to 2 reasons.
1. Sensor problem leading to "ghost" message -- require eng.
2. Toner replacement also causes this message.

Even if you do couple of boot routines you might want to have someone onsite to have a look at it. It might require parts.

May 04, 2010 | Xerox WorkCentre M20i All-In-One Laser...

1 Answer

Xerox WC 7132 printer error code 016-601 error and error type illegal access detection


  1. Click on the "Configuration" tab
  2. Choose the account mode to "User"
  3. Click on "Detailed User Settings"
  4. Change the password details as per instructions from your printer administrator
cFor more help visit cbrtechsolutions

Sep 04, 2009 | Xerox WC7232 Printer

1 Answer

I need the diferences between docucolor 12 and xerox 7132? please


Pretty vague question.
The Doc 12 probably has a Fiery Network controller, while the 7132 has a Fuji/Xerox controller.
The Doc 12 would have limited scanning capabilities while the 7132 can, depending on the config ordered, scan to E-mail, SMB, FTP, Scan to PC, and scan to a mailbox on the Xerox itself. If you have an embedded fax in the configuration, you can set it to catch incoming faxes and forward to e-mail, or a SMB or FTP folder on your PC or server.
The 7132 is rated at 8 pages a minute in color mode, and 30 pages a minute b&w.
The Doc 12 has been around since 2002, the 7132 is about 3 years old and has been replaced by the 7232.

Jun 23, 2009 | Xerox DocuColor 12 Color Copier

Not finding what you are looking for?
Xerox ColorQube 9303 Printer Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

72 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...