Question about Bushnell Weather Hunt FXi Forecast Station 960072C

1 Answer

The current tempurature is stuck. It won't update

I uninstalled and re-installed my software on another computer, but my weather center is still stuck on the current temperature from about 2 weeks ago. I thought it was related to the software, but now I'm not sure and there is no reset on the display unit. I have it plugged into a power source, but if the battery backup is out would that cause this problem?

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Toward the middle or end of March 2014, Bushnell and Accuweather terminated their data sharing contract for the Weather FXi, Hunt FXi and Golf FXi internet-based weather stations. Since the forecast information is freely available on Accuweather's website, all Bushnell would have to do is fix/update the software to grab the data a different way. These were awesome weather stations when they worked and now Bushnell has decided to brick them by refusing to update the software. They have our money and now we have electronic waste paperweights to pollute the landfills. What a great business decision for them! I for one have decided to never buy any Bushnell products again and I hope everyone else who Bushnell screwed over by this decision to brick perfectly good weather stations also decides to boycott Bushnell products.

Posted on Apr 25, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have HP solution center 8.0 and printer HP Deskjet F 4180.I can print and scan ,but my solution center doesnt work at all-it cant open


You really need to update your solution center if that is the case.
Do a L3 Uninstall first for the previous software. But Before Doing so, download the updated software. To Download:

1 Go to hp.com 2 Click on Support and Drivers 3 Enter your product name or number, in this case just type in Officejet 8500 All-In-One 4 Hit go 5 Choose your operating system 6 Hit Next 7 Click on the link that says Driver - Product Installation Software 8 Save it to your desktop
Once the download is finished for the L3 Uinstall: Insert the CD that came with the Printer in your computer disc tray --
1 Go to My Computer (XP), Computer (Vista and Win7) 2 Right Click on the Driver CD, The one that has the HP Logo 3 Open Util 4 Open CCC 5 Double Click on the icon that says Uninstall_L3
The Uninstall will prompt you to restart the computer once it's done. After doing so, Install the newly downloaded software.
I hope this helped.
****If you don'w wanna go through these steps. Try updating your adobe flash player. Just go to their website. Sometimes updating the pcs flash player works.

Feb 06, 2011 | Office Equipment & Supplies

1 Answer

How to solve if my iphone 3G cannot be on, it stuck at the apple screen?


  • The quickest way to fix your iPhone 3G is to sync it to a different computer. When you do this the computer will recognize it as a new device and install the software on it like it's never been used before, that said everything you have on it is gone. It may take a while so be patient.
  • 2 If step one is successful you can sync it to your computer. It will recognize that it is synced with another computer and ask you if you want to sync it to this one; go ahead and do it. This may take a while too because you will install the applications, songs, data, etc. you had on it before.

    WARNING! DO NOT DISCONNECT YOUR IPHONE 3G WHILE SYNC IS IN PROGRESS OR ELSE YOU WILL BE STUCK IN RESTORE MODE AGAIN!
  • 3 If steps 1 and 2 did not work or you do not have another computer to sync it with the following steps will help.
  • 4 Backup your music, videos, and applications. Typically it would be the iTunes folder in the My Music folder. This is a precautionary step to the following steps to come, your music should be unaffected but stranger things have happened.
  • 5 Uninstall iTunes, Quicktime, and other Apple component software from your computer. Follow the steps listed on the Apple Support page, "Removing iTunes, QuickTime, and other software components for Windows XP" the link is available in the resources section. Restart your computer when done.
  • 6 To be sure everything is uninstalled completely run the Windows Installer CleanUp Utility. This program removes remnants of uninstalled programs from your registry and deletes files that the uninstall fail to catch. You can download and read more about this program from the Microsoft Help and Support Page, "Description of the Windows Installer CleanUp Utility" the link is available in the resources section. Restart your computer.
  • 7 If you have a registry cleanup utility like Registry Mechanic or CCleaner run the program and restart your computer. It is sad to say but the Windows Installer CleanUp Utility may not catch everything so having a secondary cleaner could be essential.
  • 8 Install the latest version of iTunes. Currently iTunes 8 is the latest, it could change tomorrow so download it from Apple.com. Restart your computer.
  • 9 Open iTunes and connect your iPhone 3G. It may take a while for it to recognize the phone, be patient. Once iTunes recognizes your phone it will prompt you to download the latest iPhone software, the current version is 2.1. Follow the installation instructions in the Apple iPhone - Software Update page, the link is available in the resources section.

    WARNING! DO NOT DISCONNECT YOUR IPHONE 3G WHILE SYNC IS IN PROGRESS OR ELSE YOU WILL BE STUCK IN RESTORE MODE AGAIN!
  • 10 Hopefully these steps helped you recover your iPhone 3G. It is possible that even after a successful recovery your phone may revert back to being stuck. In my experience I was able to save my iPhone 3G from restore mode but when I downloaded the software update it got stuck again, luckily steps 1 and 2 fixed it.

  • Oct 06, 2010 | Apple iPhone 3G

    1 Answer

    My itunes just stopped working one day and now i can not reinstall it on my computer


    Learn how to completely uninstall iTunes, QuickTime, and other essential software components from your Windows XP PC.
    How ToFor Windows Vista or Windows 7, see this article.
    Expand All Sections | Collapse All Sections
    In some rare instances, it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    1. iTunes
    2. QuickTime
    3. Apple Software Update
    4. Apple Mobile Device Support
    5. Bonjour
    6. Apple Application Support (iTunes 9 or later)
    Important: You may see various alert messages if you uninstall these applications in a different order or only uninstall certain components.
    For detailed steps on removing and reinstalling iTunes and related components on Windows XP, refer to the following steps:
    Removing iTunes Note: iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes.
    1. Quit iTunes.
    2. From the Start menu, choose Control Panel.
    3. In Control Panel, open Add or Remove Programs.
    4. Select iTunes from the list of currently installed programs, then click Remove.
    5. When asked if you would like to remove iTunes, select Yes.
    6. After the uninstallation is complete, do not restart your computer if you are prompted to.
    7. If other program entries were listed for iTunes in Add or Remove Programs, remove those as well.
    8. In Add or Remove Programs, remove any iPod Updater applications that are listed in the same fashion as iTunes was removed.
    Removing QuickTime
    1. Quit QuickTime Player.
    2. From the Start menu, choose Control Panel.
    3. In Control Panel, open Add or Remove Programs.
    4. Select QuickTime from the list of currently installed programs, then click Uninstall.
    5. When asked if you would like to remove QuickTime, click Yes.
    6. After the uninstallation is complete, do not restart your computer if you are prompted to.
    7. If other program entries were listed for QuickTime in Add or Remove Programs, remove those as well.
    Removing Apple Software Update
    1. Quit Apple Software Update.
    2. From the Start menu, choose Control Panel.
    3. In Control Panel, open Add or Remove Programs.
    4. Select Apple Software Update from the list of currently installed programs, then click Uninstall.
    5. When asked if you would like to remove Apple Software Update, click Yes.
    6. After the uninstallation is complete, do not restart your computer if you are prompted to.
    7. If other program entries were listed for Apple Software Update in Add or Remove Programs, remove those as well.
    Removing Apple Mobile Device Support
    1. From the Start menu, choose Control Panel.
    2. In Control Panel, open Add or Remove Programs.
    3. Select Apple Mobile Device Support from the list of currently installed programs, then click Uninstall.
    4. When asked if you would like to remove Apple Mobile Device Support, click Yes.
    5. After the uninstallation is complete, do not restart your computer if you are prompted to.
    Notes: Do not manually delete the Mobile Device Support folder located at C:Program FilesCommon FilesApple. Use Add or Remove Programs as described in the steps above.
    Removing Bonjour
    1. From the Start menu, choose Control Panel.
    2. In Control Panel click "Add or Remove Programs."
    3. Select Bonjour from the list of currently installed programs then click Uninstall.
    4. When asked if you would like to remove Bonjour click Yes.
    5. After the uninstallation is complete do not restart your computer if you are prompted to.
    Removing Apple Application Support (iTunes 9 or later)
    1. From the Start menu, choose Control Panel.
    2. In Control Panel, open Add or Remove Programs.
    3. Select Apple Application Support from the list of currently installed programs, then click Uninstall.
    4. When asked if you would like to remove Apple Application Support, click Yes.
    5. After the uninstallation is complete, do not restart your computer if you are prompted to.
    Verify iTunes and related components are completely uninstalled
    1. Restart your computer.
    2. After the computer restarts, open Local Disk (C:) located in Computer or whichever hard disk your programs are installed on.
    3. Open the Program Files folder.
    4. Right-click the iTunes folder, choose Delete, and choose Yes when asked to confirm the deletion. Note: This folder may have already been deleted if iTunes was successfully removed.
    5. Right-click the iPod folder, choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    6. Right-click the QuickTime folder (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    7. Right-click the Bonjour folder (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    8. Open the Common Files folder.
    9. Right-click the Apple folder (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    10. Open Local Disk (C:) located in Computer or whichever hard disk your operating system is installed on.
    11. Open the Windows folder.
    12. Open the System32 folder.
    13. Right-click the QuickTime file (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    14. Right-click the QuickTimeVR file (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    15. Right-click the Recycle Bin and choose Empty Recycle Bin
    Reinstalling iTunes and related components After verifying that iTunes is completely uninstalled, you should download and install the latest version of iTunes.
    Additional Information iPodService.exe Alert Follow these steps if the message, "Cannot delete iPodService.exe: It is being used by another person or program" appears when you try to delete the iPod folder.
    1. Make sure that iTunes and the iPod Updater utility are not open.
    2. Press and hold Control-Alt-Delete. Select Start Task Manager.
    3. Click the Processes tab.
    4. Locate "iPodService.exe" in the list.
    5. Click "iPodService.exe" and choose End Process.
    6. Quit the Task Manager.

    Aug 04, 2010 | Apple iTunes

    1 Answer

    RCA Easy Rip Uninstall will not... uninstall


    I agree that RCA Easy Rip adds just about zero value; although i use my pearly everyday, I always access it via windows explorer as a removable drive.

    I removed that program from the Pearl so it would stop asking if I wanted to install easyrip.

    My suggestion for you is to run the installation software for easyrip again. I think this will help for one of two reasons:

    1. Being unable to uninstall from control panel is unusual and suggests an incomplete or corrupted installation. Reinstalling may fix the installation enough to use control panel's uninstall feature.
    2. Many software setup routines, upon finding the software already setup, will ask you if you want to remove it rather than install it a second time.

    Hope that helps.

    Sep 26, 2009 | RCA Pearl TH1102 MP3 Player

    1 Answer

    Original motherboard sound drivers from MB disk don,t work.


    Here is a link to the driver page for your board.
    updates and see if this is
    http://www.biostar-usa.com/app/en-us/mb/driver.php?S_ID=377

    You could try downloading the driver from the site..Maybe there is a problem with the one on the disk. Also check the BIOS updates and see if this is a known issue. They may have a BIOS update to fix this issue. Before installing the driver/software I would remove the current audio software and remove the audio from the device manager and then re-boot the computer. Then install the downloaded software and see if that works.

    Sep 08, 2009 | Biostar TA790GX Motherboard

    1 Answer

    HP 1610 Printer...prints a test page, copies and prints but will not print anything from my computer..it is connected..I have uninstalled and retinstalled...the printer goes through the "printing" mode and...


    try an updated driver for the printer (download it from the HP website). Its possible that the current software installed on your computer may be incompatible with your OS. Be sure to uninstall the current software before doing this. It could also be that you have a bad cable connected to your printer.

    Jul 23, 2009 | HP Office Equipment & Supplies

    1 Answer

    Kodak aio printer 5300/software problem


    Greetings Jackie,

    Sounds like you have a failed .netframework installation. This is a Microsoft feature, but is delivered during installation of Kodak software as well. To fix this, do the following.

    1. Open the Control Panel.
    2. Double-click Add / Remove Programs (Windows XP only).
    3. Select Microsoft .NET Framework 2.0.
      IMPORTANT: If other versions of Microsoft .NET Framework are listed, do not perform this operation on those other versions. Follow this procedure ONLY for Microsoft .NET Framework 2.0.
    4. Click Change / Remove.
    5. Select Repair, and click Next.
    NOTE: A progress bar shows the repair progress.
    6. After the repair is complete, make sure the Restart the computer check box is selected, and click Finish.
    7. After the computer restarts, start the KODAK AiO Home Center software.
    IMPORTANT: If the KODAK AiO Home Center software fails to start or continues to display an error message, completely uninstall Microsoft .NET Framework 2.0 and do a clean reinstall KODAK AiO Home Center software. The Microsoft .NET Framework 2.0 will also be reinstalled with the KODAK AiO Home Center software.
      1. Follow steps 1 - 4 above.

      2. Select Uninstall, and click Next.
        IMPORTANT: Uninstall ONLY Microsoft .NET Framework 2.0. If other versions of Microsoft .NET Framework are listed, do not uninstall them.
      3. Restart the computer.

      4. Perform a clean re-installation of the KODAK AiO Home Center software:
        a. Disconnect all USB devices from the computer, including the Kodak EasyShare all-in-one printer.
        NOTE: Do not disconnect your mouse or keyboard.
        b. Uninstall the Kodak EasyShare 5000 series all-in-one software:
          i. In the Control Panel, select Add or Remove Programs (Windows XP).
          ii. Select one of the following software programs from the list of currently installed programs, depending on which one appears in your list:
            • Kodak EasyShare software
            • Kodak all-in-one printer software
            • Kodak EasyShare 5000 series all-in-one software
          iii. Click Change or Remove (Windows XP).
          iv. When the Install Wizard appears, click Next.
          v. Depending on the issue(s) you are experiencing, do the following:
            • If you are experiencing errors with the Kodak EasyShare software, such as a Tricode, in addition to errors with the KODAK AiO Home Center software, select Remove, click Next, and follow the on-screen instructions for removing the software.
            • If you are not experiencing errors with Kodak EasyShare software, select Modify to uninstall only KODAK AiO Home Center software, and click Next.
          vi In the Custom Setup window, select Remove from the drop-down menu for the Kodak All-in-One Printer, and click Next.
          vii. In the Ready to remove the program window, click Next.
          viii. In the Uninstall Complete window, click Continue.
          ix. Restart the computer.
        c. Delete the files and folders that can interfere with the installation:
          • Printer folder in C:\Program Files\Kodak
          • Both the Eastman Kodak Company and KDS_Kodak folders in C:\Documents and Settings\All Users\Application Data
          • Kodak 5000 Series AiO folder in C:\Documents and Settings\All Users\Application Data\Kodak
          • Printer folder in C:\Documents and Settings\All Users\Application Data\Kodak\EasyShareSetup
        d. Run Disk Cleanup.
          i. Open My Computer.
          ii. Right-click Local Disk (C:) and select Properties.
          iii. Click the Disk Cleanup button.
          iv. When the Disk Cleanup for (C:) window appears, select the Temporary Internet Files, Recycle Bin, and Temporary Files check boxes.
          v. Click OK , then click Yes to delete all files and begin the Disk Cleanup.
          vi. When the Disk Cleanup is finished, click OK in the Local Disk (C:) Properties window.

        e. Shut down all background applications.
          i. Select Start > Run.
          ii. Type msconfig in the Open field, and click OK.
          iii. Select the Startup tab.
            IMPORTANT: If not all the applications in the Startup Items list are selected, write down which applications are selected so you know which ones to turn on again later.
          iv. Click Disable All , then click OK .
          v. When prompted, restart the computer.
        f. After the computer restarts, insert the KODAK EASYSHARE 5000 Series All-in-One Software CD into the computer CD drive to begin the installation.

        g. During the installation process, when prompted, select to search for an updated version of the software on the Kodak Web site and install the updated version.

        h. Before restarting the computer again, turn on the background applications.
          i. Select Start > Run.
          ii. Type msconfig in the Open field and click OK.
          iii. Select the Startup tab.
          iv. Under Startup Items:
            - If only some items were originally selected, select the check box in front of the items that you noted in Step e-iii.
            - If all background items were originally selected, click Enable All, and click OK.

        i. Restart the computer.
        Once restarted, you should be OK.If not call our 800 421 6699 and they will help further.
        Best Regards,
        Ron Baird - the friendly Kodak guy

    Sep 18, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

    1 Answer

    Kodak EasyShare 5300


    Sorry to hear about your trouble. Since I am not sure of the details, let me offer a long review and suggestion. It may work for you, especially if the AiO software is not installing correctly.

    If the KODAK AiO Home Center software fails to start or an error message appears, there may be a problem with the Microsoft .Net Framework 2.0 installation. To resolve this condition:

    1. Open the Control Panel.
    2. Double-click Add / Remove Programs (for Windows XP) or Programs and Features (for Windows Vista).
    3. Select Microsoft .NET Framework 2.0.

    IMPORTANT: If other versions of Microsoft .NET Framework are listed, do not perform this operation on those other versions. Follow this procedure ONLY for Microsoft .NET Framework 2.0.

    4. Click Change / Remove (for Windows XP) or Uninstall (for Windows Vista).

    5. Select Repair, and click Next.
    NOTE: A progress bar shows the repair progress.

    6. After the repair is complete, make sure the Restart the computer check box is selected, and click Finish.

    7. After the computer restarts, start the KODAK AiO Home Center software.

    IMPORTANT: If the KODAK AiO Home Center software fails to start or continues to display an error message, completely uninstall Microsoft .NET Framework 2.0 and do a clean reinstall KODAK AiO Home Center software. The Microsoft .NET Framework 2.0 will also be reinstalled with the KODAK AiO Home Center software.

    1. Follow steps 1 - 4 above.

    2. Select Uninstall, and click Next.
    IMPORTANT: Uninstall ONLY Microsoft .NET Framework 2.0. If other versions of Microsoft .NET Framework are listed, do not uninstall them.

    3. Restart the computer.

    4. Perform a clean re-installation of the KODAK AiO Home Center software:

    a. Disconnect all USB devices from the computer, including the Kodak EasyShare all-in-one printer.
    NOTE: Do not disconnect your mouse or keyboard.
    b. Uninstall the Kodak EasyShare 5000 series all-in-one software:

    1. In the Control Panel, select Add or Remove Programs (Windows XP) or Program and Features (Windows Vista).
    2. Select one of the following software programs from the list of currently installed programs, depending on which one appears in your list:

    Kodak EasyShare software
    Kodak all-in-one printer software
    Kodak EasyShare 5000 series all-in-one software

    3. Click Change or Remove (Windows XP) or Uninstall (Windows Vista).
    4. When the Install Wizard appears, click Next.
    5. Depending on the issue(s) you are experiencing, do the following:

    - If you are experiencing errors with the Kodak EasyShare software, such as a Tricode, in addition to errors with the KODAK AiO Home Center software, select Remove, click Next, and follow the on-screen instructions for removing the software.
    - If you are not experiencing errors with Kodak EasyShare software, select Modify to uninstall only KODAK AiO Home Center software, and click Next.

    6 In the Custom Setup window, select Remove from the drop-down menu for the Kodak All-in-One Printer, and click Next.
    vii. In the Ready to remove the program window, click Next.
    viii. In the Uninstall Complete window, click Continue.
    ix. Restart the computer.

    c. Delete the files and folders that can interfere with the installation.

    For Windows XP, delete:
    i. Printer folder in C:\Program Files\Kodak
    ii. Both the Eastman Kodak Company and KDS_Kodak folders in C:\Documents and Settings\All Users\Application Data
    iii. Kodak 5000 Series AiO folder in C:\Documents and Settings\All Users\Application Data\Kodak
    iv. Printer folder in C:\Documents and Settings\All Users\Application Data\Kodak\EasyShareSetup

    For Windows Vista, delete:
    i. Printer folder in C:\Program Files\Kodak
    ii. Eastman Kodak Company folder in C:\ProgramData
    iii. Eastman Kodak Company folder(s) in C:\Users\your name\AppData\Local

    d. Run Disk Cleanup.

    i. Open My Computer.
    ii. Right-click Local Disk (C:) and select Properties.
    iii. Click the Disk Cleanup button.
    iv. When the Disk Cleanup for (C:) window appears, select the Temporary Internet Files, Recycle Bin, and Temporary Files check boxes.
    v. Click OK , then click Yes to delete all files and begin the Disk Cleanup.
    vi. When the Disk Cleanup is finished, click OK in the Local Disk (C:) Properties window.

    e. Shut down all background applications.

    i. Select Start > Run.
    ii. Type msconfig in the Open field, and click OK.
    iii. Select the Startup tab.

    IMPORTANT: If not all the applications in the Startup Items list are selected, write down which applications are selected so you know which ones to turn on again later.

    iv. Click Disable All , then click OK .
    v. When prompted, restart the computer.

    f. After the computer restarts, insert the KODAK EASYSHARE 5000 Series All-in-One Software CD into the computer CD drive to begin the installation.

    g. During the installation process, when prompted, select to search for an updated version of the software on the Kodak Web site and install the updated version.

    h. Before restarting the computer again, turn on the background applications.

    i. Select Start > Run.
    ii. Type msconfig in the Open field and click OK.
    iii. Select the Startup tab.
    iv. Under Startup Items:

    - If only some items were originally selected, select the check box in front of the items that you noted in Step e-iii.
    - If all background items were originally selected, click Enable All, and click OK.

    i. Restart the computer.

    Jan 31, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

    Not finding what you are looking for?
    Bushnell Weather Hunt FXi Forecast Station 960072C Logo

    Related Topics:

    148 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Bushnell Measuring Tools & Sensors Experts

    Ian

    Level 1 Expert

    4 Answers

    Vernon Taylor

    Level 3 Expert

    3771 Answers

    Brad Brown

    Level 3 Expert

    16194 Answers

    Are you a Bushnell Measuring Tool and Sensor Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...