Question about Hammering

2 Answers

My kango 637 makes quite a lot of noise but lacks punch. In fact I get more out of a cheap breaker. Could this be a piston problem and where can I get spare parts from

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,836 Answers

There arent spare parts no more and all energie to put in this old english tool is lost In 89 % of this machine they are leaking in front of the chisel the sleeve for the impactbold is in most cases worn .
And parts that are for some machines to get are to expensive .to buy if New OLD Stock.

Posted on May 23, 2016

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer got voted for 20 times.

  • Expert
  • 304 Answers

Try ebay

Posted on May 03, 2014

  • col hume
    col hume Jan 02, 2017

    hi mate try Project 21 Designs its a uk site has spare parts for kango 637 also can download 637 instruction manual hope this helps its where I have got a couple of parts for mine from cheers col



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Anybody need a old style switch for kango 900, 950, 637 and other models

Hello I am inquiring about your switches from kango please email us at

We are interested in purchasing atleast one so message us asap

Thank you

Oct 27, 2015 | Hammering

2 Answers

Hi I need a switch for a Kango 637 110v please can anybody help me?

Unfortunately Kango is out of business, they were a great hammer though. My understanding is Milwaukee bought them and marketed them mostly in the UK - you can still find some parts overseas but it is hit or miss.

Dec 24, 2014 | Hammering

1 Answer

I have a kango 900k breaker, the con rod has broken, is it possible to obtain a replacement part. Thanks

Its the ask if its a MILWAUKEE kango 900K yes but if its a KANGO 900K the metal red or metal blue demolitionhammers its difficult to find but the cause of the broken con rod when the machine is not good air tight it can have has burned o-rings and more also the battle cilinder can be torned and piston pin not smooth enough and ,more parts of the original English KANGO are not simply deliverable anymore, but for the American milwaukee red 900k its not a problem

Jan 24, 2014 | Hammering

2 Answers

Need diagram for kango 900 concrete hammer drill

Hi Vicki
Is it the old all silver one or the new one with the red motor housing?

May 19, 2012 | Milwaukee Tool Hammering

2 Answers

Need Parts List And Service Guide For Kango 990/950 Breaker

If these are the original Kango kangos then you are out of luck. They have been obsolete for many years now and no parts have been manufactured for a long time. The name was bought by DeWalt and they didn't do much with it. The Kango name is now ownd and used by Milwaukee, but there machines do differ alot from the originals. There were a few main models and the main mid sized breakers were the 900 (hammer only) and 950 (rotary hammer) There were a few facelift/variations of each (K, X and B I think) and they did use a couple of different sized seals/pistons/cylinders.
If it is one of the Milwaukee models you can look up diagrams here...

Apr 24, 2012 | Hammering

2 Answers

My kango 637 breaker runs but no power is getting to the chisel canyou help please

There are a couple of main things that could cause this. Unfortunately this is an obsolete machine and I doubt you will be able to find any spares for it. Probable causes are worn seals/in need of service. Worn armature pinion gear and/or crank pinion gear. Ideally you should replace both if either one is damaged, even if the other one looks ok. There are always other possibilities but they it would need stripping on the hammer mech to check all the piston/pins/anvils etc. This is a very old machine (I cut my teeth on these when i started in the trade 20yrs ago).

Dec 12, 2011 | Hammering

2 Answers

I have a 1991 Dodge Dakota that is running very poorly. There is an abundance of blue smoke that emits while accelerating. The truck has a V8 engine but lacks the punch, has a lot of trouble accelerating...

Blue smoke is a direct indication your burning oil.This is a old truck and im assuming it has lots of milage.If this true either your valve seals are bad or piston rings are bad.Both of these cause oil burning,which will cause blue smoke and poor performance.

Feb 09, 2011 | 1991 Dodge Dakota

3 Answers

I cant find kango oil for my kango electric hammer

What kango hammer do you have? I am most familiar with the UK kango 900 and 950, pre-milwaukee.

Sep 18, 2010 | Hammering

2 Answers

Schematic diagram of kango breaker 900x

The 900 is a hammer only, the 950 is a hammer drill. the newer ones 950s used spline bits. Unfortunately new parts are no longer available for these great machines. What is your problem.

May 20, 2010 | Hobby Drill

2 Answers

What type of oil should I use in a Kango electric hammer type m(di) ? Is it possible to get a parts/service manual for this (I realise it is old. Thanking you in naticipation of a reply-Charlie

\charlie use sewing machine oil, as for a book on it put the make model into google and a pdf might be available as for parts not really unless you sroce them through the paper or ebay

Apr 24, 2010 | Hammering

Not finding what you are looking for?
Hammering Logo

Related Topics:

1,657 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hammering Experts

John Trevino

Level 3 Expert

1388 Answers


Level 3 Expert

3289 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1836 Answers

Are you a Hammering Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides