Question about Samsung Refrigerators

1 Answer

RT50 control panel not responding

Unable to elicit any response from the control panel child lock is not on as the child lock display is not lighted up however i am able to hold down both power freeze/temprature buttock....please kindly advise

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

It still sounds like the child lock is on since that prevents accidental setting changes on the refrigerator's control panel.The following will NOT work if the child lock function is activated: Freezer Temp Button Fridge Temp Button Power Freeze Button Power Cool Button Ice Type Button Water Button Ice maker Water OR it may be in Cooling Off/Demo Mode. Cooling Off/Demo Mode is a feature used by retailers to display the refrigerator without running the compressor. If your unit is not cooling, and the bars are constantly scrolling up and down the temperature, check your manual for reset advice

Posted on May 17, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
aborcass
  • 2651 Answers

SOURCE: On electronic control panel and

you have a maytag ice and water in door 3 door refrig???? if so you needs a new high voltage board, its gone bad. locatdon back wall behind the refrig. only resolution is to replace the board..

Posted on Mar 16, 2008

tborn6
  • 700 Answers

SOURCE: Child lock not working.

the child lock is for the prevention of the temperatures being messed with and they do not shut off the water or the ice.

Posted on Jan 21, 2009

  • 286 Answers

SOURCE: ULine 2175RF Digital Touch Controller not responding.

Hi
You will need to remove the grill. Unplug the unit, Then on the control board you will see 4 wire with a black connector. Unplug that and plug it in 4 or 5 times. Make sure you dont bend the pins. Then plug the connector back in and plug unit back in. You should have better response on the display. They have a special coating and the pins needs to be cleaned this way.

Posted on May 14, 2009

  • 74 Answers

SOURCE: Front panel beeps when I push any button or

possible bad dispenser board

Posted on Nov 17, 2010

Macmarkus
  • 2605 Answers

SOURCE: GE frig is not cool

Hello,

Welcome to FixYa,

Unfortunately the issue with the controls not responding as well as not cooling is likely directly related to the power control board ( PCB) at the back of your fridge.

If you slide the fridge out and look at the back you'll see a square panel approx. 4"x5" held by four screws ( sometimes three ) remove it and you'll see this control...


macmarkus_125.jpg
It should be available at "repairclinic.com" or "searspartsdirect.com" to name a couple for about $150 or so.

As for the owners manual you may be able to get one online if you "google" your model number. Thanks for choosing FixYa and good luck.

Let me know how you make out or if you need further assistance.

Regards,

Macmarkus :)

Posted on Dec 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The control panel on my jenn air fridge model # jfc2089htb is not responding and I cannot adjust any setting. Fridge is stuck at 44f and freezer -1f


A simple reason could be the control panel is locked (child/safety lock) - look for a small lock symbol in the display.

Oct 30, 2016 | Refrigerators

1 Answer

Bosch HME97 stopped working


Did you check the original fuse for continuity? Do so with an ohm meter if not. Does the display light up? If you take off the cover & look at the control board do you see anything burnt or, smell burn? If so, it will cost about as much for a control panel as it would for a new microwave.

Nov 15, 2013 | Bosch HME9760 Microwave Oven

1 Answer

How do I use the Child Lock option on Samsung WF-B1456GW?


Hi there,

You can use the child lock feature in 2 ways.

1. To prevent operation of the washing machine when no wash cycle is running

To set this feature, switch the machine on using the POWER button at the top-left of the control-panel. Next, press and hold both the SPIN and RINSE buttons for about 3 seconds - until the child lock light indicator on the control panel illuminates. All functions of the washing machine will now be disabled apart from POWER ON/OFF until such time as the child lock is deactivated.

To deactivate the child lock, press and hold the SPIN and RINSE buttons again until the child lock light indicator on the control panel goes out.

2. To prevent any tiny fingers from tampering with the machine while a program is running.

After pressing the START/PAUSE button to start the wash cycle, press and hold the SPIN and RINSE buttons until the child lock light indicator illuminates. All buttons on the control panel will now be disabled until the child lock has been disabled. When the wash cycle has finished, you will need to switch the child lock off again to reactivate the buttons. Once you have finished using the washer, reactivate the child lock again before switching the power off as above.

The feature can also be used when using the delayed start feature, but needs to be set after pressing the START/PAUSE button.

Hope this helps. Please let me know if I can be of further assistance.

Regards,
BElectric

Feb 09, 2011 | Washing Machines

1 Answer

I have accidentally locked my microwave oven (profile performance convection oven). I was cleaning the front. Can you tell me what to do?


Got you covered. Here you go:

Microwave - Explanation of the Child Lock Out Feature
Many microwave control panels can be locked to prevent accidental use or access by children.
There are two different ways to lock the control panel:
1. Press and hold the CLEAR/OFF pad for 3 seconds. The display will show "LOCK" and then revert to the time of day.
A small "L" will appear in the corner of the display as a reminder that the control panel is locked. If anyone tries to use the microwave, the display will show "LOCK".
2. On some models, press and hold the 5 and 7 pads simultaneously for 3 seconds.
To unlock the control: Repeat the procedure which was used to lock the control. (Press and hold the CLEAR/OFF pad for about 3 seconds or hold the 5 and 7 pad simultaneously for 3 seconds.)
Microwave - Explanation of the Child Lock Out Feature

Many microwave control panels can be locked to prevent accidental use or access by children.

There are two different ways to lock the control panel:

1. Press and hold the CLEAR/OFF pad for 3 seconds. The display will show "LOCK" and then revert to the time of day.
A small "L" will appear in the corner of the display as a reminder that the control panel is locked. If anyone tries to use the microwave, the display will show "LOCK".


2. On some models, press and hold the 5 and 7 pads simultaneously for 3 seconds.


To unlock the control: Repeat the procedure which was used to lock the control. (Press and hold the CLEAR/OFF pad for about 3 seconds or hold the 5 and 7 pad simultaneously for 3 seconds.)

That info is from GE

Hope that does the trick.
Regards, Farmerbear at FixYa.com






























Microwave - Explanation of the Child Lock Out Feature

Many microwave control panels can be locked to prevent accidental use or access by children.

There are two different ways to lock the control panel:

1. Press and hold the CLEAR/OFF pad for 3 seconds. The display will show "LOCK" and then revert to the time of day.
A small "L" will appear in the corner of the display as a reminder that the control panel is locked. If anyone tries to use the microwave, the display will show "LOCK".


2. On some models, press and hold the 5 and 7 pads simultaneously for 3 seconds.


To unlock the control: Repeat the procedure which was used to lock the control. (Press and hold the CLEAR/OFF pad for about 3 seconds or hold the 5 and 7 pad simultaneously for 3 seconds.)

Microwave - Explanation of the Child Lock Out Feature

Many microwave control panels can be locked to prevent accidental use or access by children.

There are two different ways to lock the control panel:

1. Press and hold the CLEAR/OFF pad for 3 seconds. The display will show "LOCK" and then revert to the time of day.
A small "L" will appear in the corner of the display as a reminder that the control panel is locked. If anyone tries to use the microwave, the display will show "LOCK".


2. On some models, press and hold the 5 and 7 pads simultaneously for 3 seconds.


To unlock the control: Repeat the procedure which was used to lock the control. (Press and hold the CLEAR/OFF pad for about 3 seconds or hold the 5 and 7 pad simultaneously for 3 seconds.)

Sep 13, 2010 | General Electric Microwave Oven

1 Answer

It keeps dispaling FL in the panel


Hello, the FL displaying on the panel simply means Failed to Lock. Door lock monitor switch in door lock mechanism unable to communicate to control board the door is locked.

Solution
Check the wire connections in harness leading from machine control board to door lock mechanism
Check solenoid and door lock enable switch in door lock mechanism.
Replace responsible component..

Thanks

May 21, 2010 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

My windows will not roll up only the driver side & the power


Maybe check for a child-safety function that disables the door panel buttons.

Mar 30, 2010 | 2004 Infiniti QX56

1 Answer

Sony DAV DZ230 Child Lock


hello You can deactivate the buttons on the unit
(except for "/1) for preventing misoperation,
such as child mischief (child lock function).
When the child lock function is activated, the
buttons on the unit are locked and “ ” lights
up in the front panel display. (You can operate
the system by using the remote.)
Note
•When you operate the buttons on the unit while the
child lock function is on, “CHILD LOCK” appears in
the front panel display.
1 Press SYSTEM MENU.
2 Press
X/x repeatedly until “CHILD
LOCK” appears in the front panel
display, then press or
c.
3 Press
X/x to select a setting.
The default setting is underlined.
• “OFF”: Child lock function off.
• “ON”: Child lock function on.
4 Press .
The setting is made.
5 Press SYSTEM MENU.
The system menu turns off.
Tip
• You can activate the child lock function by pressing
x for more than 5 seconds (“ ” lights up in the
front panel display).
To cancel, press x for more than 5 seconds so that
“ ” disappears from the front panel display.
Deactivating the Buttons
on the Unit good luck

shaun

Sep 12, 2009 | Audio Players & Recorders

2 Answers

Frigidaire affinity atf6000es1 - control panel locked


Try buttons "dry" & "spin" together for a few seconds. This is the child lock display.

Or press "end of cycle" for over 3 seconds.

Or press "options & select" till the light goes off.

Works for other machines hope it may for you..............And please rate me if helped

Feb 21, 2009 | Frigidaire ATF6000ES Front Load Washer

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Paul

Level 2 Expert

380 Answers

Are you a Samsung Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...