An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert that has over 500 points.
Re: all i get is screen save display?
It seems you need to reset your phone.
If your HTC HD2 is frozen and a soft reset doesn't work, this guide shows how to restore your handset to its factory settings with a hard reset
There are two ways you can perform a hard reset on your HTC HD2. The first is best if your phone is still operational. If it has crashed and you can't get a response from it, you're better to try option two. Performing a factory reset via the settingsmenu
On the Home screen's Settings tab, select Menu - All Settings - System - Clear Storage
Enter 1234 and tap Yes to confirm
Performing a factory reset using phone buttons
If your phone has crashed and won't respond, you'll have to perform a battery pull to power the phone off. Simply take off the back cover and remove the battery. Otherwise, just turn your HTC HD2 off using the power button.
With your phone powered off, press and hold the volume up and volume down buttons
While holding the volume buttons, press the power button and then release it
When you see a warning message on screen, release the volume up and volume down buttons
Press the volume up button to perform the reset when prompted, or press any other button to cancel the reset
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You will need it to be unlocked at a shop. then do this make sure you have update itunes installed on pc laptop. ( dont take to apple store for unlocking) Press home volume down and power when phone comes on take finger off power then volume then home. plug into itunes and restore software after it has installed click on new this will wipe phone to new after you can put your stuff back on with itunes all apps and contacts that have been saved to itunes. (this will work for gray screen)
Hi, If your Home screen is not switched on, then charge your phone and then try switch on. Still if you have problem, then your display might have damaged which you need to service or replace your display.
The screen saver is set to save mode. use the settings functionality of disable or reesatblsih system settings. a possible battery full charge after powering off device completely shoudl provide the capacity to hold splash screens with phone call display all at once.
There is a LCD strip (Bunch of closely punched wires, that makes up a connector). If you have replaced the LCD yourself them there may be chances that the strip is not properly punched. That strip comes out of display and goes straight onto the main circuit board.
This is a common issue that makes the Phone works perfectly but in a black-out mode.
I hope you have a clear picture now. Regards, Waqar.If I was helpful, Kindly do Rate!
If it turns out to be not the display chips but the screen there is an Blackberry Repair Guide that shows how to open a Blackberry and replace the screen. Once it is open it's as easy as taking the broken screen off the front assembly and installing a new one, the parts are available on ebay. If it's the logic board that can be replaced as well. Blackberry Repair
show/hide menu icons
Show or hide menu feature icons in the home screen:
menu > Settings > Personalize > Home Screen > Home Keys > Icons > Show or Hide.
change menu icons & home keys
Change menu feature icons, soft key labels, and smart key function in the home screen:
Menu > Settings > Personalize > Home Screen > Home Keys.
Set external display orientation:
Menu > Settings > Initial Setup > External Display > Left Orientation or Right Orientation.
language Set menu language:
Menu > Settings > Initial Setup > Language scroll Set the highlight bar to stop or wrap around in menu lists:
Menu > Settings > Initial Setup > Scroll.
ringer IDs Activate ringer IDs assigned to phonebook entries and categories:
Menu > Settings > Ring Styles > style Detail > Ringer IDs
ring volume a > Settings > Ring Styles > style Detail > Ring Volume.
Menu > Settings > Ring Styles > style Detail > Key Volume.
Press the volume button on the side of the phone to display a screen similar to previous Sony Ericsson Cybershot phones during standby mode. It will display the time and a message icon. This is probably an energy saving feature when the screen goes black in standby mode, but you must press the volume button to get to that screen.