Question about Pool & Spa

1 Answer

Compool 3000CP inside pool control is blank. I cannot select any features. It appears that there is no power going to it.

Compool 3000CP controller inside the house went blank last night. Prior to that I would get random numbers for various settings and the lights, spa, etc would come on at unscheduled times. I checked the outside box and it appears to be working. Is there any way for me to check the system or do I need to call a professional? Thanks

Posted by on

  • Mahmoud Hassanizadeh Apr 01, 2014

    Sorry, it is CP3600 indoor controller.

  • Mahmoud Hassanizadeh Apr 02, 2014

    I pressed the reset button using a paper clip, but nothing happened. The programs on the controller appear to be working. The pool come on and turns off as scheduled, It is just blank and non-responsive.


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 57 Answers

It could be one of 3 things, the indoor controller may needto be replaced, or the outdoor controller, or the wiring betwen the two, from your outdoor control to the inside house panel. your best bet is to switch out your old system with a compool to easytouch upgrade with the screenlogic interface bundle, or a Jandy Iaqualink upgrade. This will enable wireless access to the pool programs as well as give you control over variable speed pumps, which, if you dont have already, you will want to will want a pool professional to install these items.

Posted on Apr 14, 2014

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a compool CP3400 system and my spa jets will not turn on

check to see if relay is sending voltage to motor if not bad relay if so bad motor

Mar 10, 2015 | Pentair Compool CP3400TX Pool & Spa...

1 Answer

Where is the filter pump relay switch in a Pentair Compool 3600 control box

turn power off the nremove front cover the filter relay should be #1 position if not sure look at auxilarries and follow the red and black wire from filter to the relay why do you need to know?

Jul 07, 2014 | Pool & Spa

1 Answer

My Compool 3000cp appears to be blank, I cannot select any features.

I would recommend a professional in this case. Those systems are very old. It may be a case of old wiring in the walls. Difficult to say.

Mar 31, 2014 | Pool & Spa

1 Answer

Actuator/Valves are not in Sync with the control panel

You may have to open the valves and reset the cams. Not too tricky, just a lot of trial and error to get it just right
FYI when you decide to replace the actuators, Intermatic now makes a direct replacement for both Compool (Pentair) and Jandy models. They are significantly cheaper.

Mar 26, 2014 | Pool & Spa

1 Answer

Service mode Compool

turn everything off then turn back on if it is still uncontrolable sounds like master pc board

Feb 27, 2014 | Pentair Compool CP3400TX Pool & Spa...

1 Answer

We have compool lx3400. have no connection between house and outside panel . We have to go out to the box outside and manually turn off and on

If there is no wall mounted controller (CP-3400) it probably had a wireless remote. You'll need to get in touch with a pool tech to see exactly which controller will work with your system.

A cheaper solution may be to convert it to Intermatic timers if all you really need is on/off function for the pumps.

Oct 24, 2013 | Pool & Spa

1 Answer

Compool cp3400

when the indoor control start the alarm , did you notice any error code display in indoor control like 170 ? POSSIBLE IS THIS control a pool only or pool and spa combination, did you have a pool heater connected to compool 3400 (PENTAIR)

Jun 14, 2013 | Pool & Spa

1 Answer

How to wire controls for a raypak heater to a compool lx3600 controller

if it is three wires see which wires are connected to main board one should be on each pool spa com match tose and heater should work make sure to put heater on remote

May 19, 2013 | Pentair Pool & Spa

2 Answers

I have a Compool lx220 control for my pool solar

Check the valve actuator toggle switch. It is 180 degrees out. If the toggle switch is in the up postion flip it down or vise versa.

Aug 26, 2009 | Pool & Spa

Not finding what you are looking for?
Pool & Spa Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

Bill Jordan

Level 2 Expert

372 Answers

David Spradling
David Spradling

Level 3 Expert

3543 Answers

Are you a Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides