Question about Brother MFC-260C All-In-One InkJet Printer

1 Answer

Recieving data very slowly and not printing

Recieving data very slowly

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Brother Expert
  • 181 Answers

Slow transfer of information to the printer can be a couple of things.
1) The document is massive. If you are sending a picture then check the size of the image file, same for normal files. More than 1Mb is going to take a long time unless you have a very powerful printer.
2) The Driver is not able to translate the file into a format the printer can accept. Try updating the driver.
3) The connection to the printer is sketchy. If the cable connecting the PC to the Printer is damaged some information will be getting lost as it is trying to send. Try replacing the cable.

Posted on Jan 24, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer saying recieving data and is not printing


First check the printer itself is working OK by printing a test page.
Most printers have a power-on self test (eg press feed button while pressing power on - please consult your manual). If the test print is OK, then it's the PC or connecting cable. You could try any other PC or laptop (you would have to instal your printer software first) but just try re-installing your printer software first on YOUR computer. If that doesn't work try any other PC or Laptop available as directed above.
USE A FILE THAT YOU HAVE PRINTED OK BEFORE IF POSS.
If none of the works then the cable is suspect.

Mar 31, 2014 | Brother MFC Office Equipment & Supplies

1 Answer

I received several important faxes that did not print, just blank paper. Then I realized I was out of ink. Anyway to retreve those lost faxes?


Not normally...once the machine "thinks" it has printed the information the actual Data is no longer kept in memory...there may be a record of the fax being recieved but not the actual Data.

Feb 13, 2011 | HP 1040 Plain Paper Inkjet Fax

1 Answer

I have a Brother MFC 790cw that does not print black all the other colors work, I have updated the driver bought a new ink cartrige and used the the clean option for the black ink. I know it is recieving...


Try printing a rest page and if that doesn't print in black ink the printhead is probably blocked.

With some printers the printhead is part of the ink cartridge and such problems tend to disappear when the cartridge is replaced, unless the cartridge is faulty. Other printers use cartridges that are ink and nothing more and those are prone to the printheads drying out and becoming blocked unless they are never allowed to become completely empty of ink and are kept in frequent use.

Cleaning/replacing such a printhead usually needs special tools and experience and in the case of many cheap domestic printers the cost of service far outweighs the cost of replacement.

Aug 13, 2017 | Brother MFC790cw All-In-One InkJet Printer

3 Answers

I recieve trxt messages in large print how can i


just go in message settings font size mode their u get small,normal,big then choose normal....

Aug 30, 2009 | Samsung Tocco Ultra Cell Phone

1 Answer

My 1800 is printing extremely slowly , until I


Your printer may have recieved a spike from the same lightning and fried the circuit board.
Is it under warranty?
If so call Epson and get an exchange unit.
The MAY help you if you mention the surge

Jun 19, 2009 | Epson Stylus Photo R1800 InkJet Printer

1 Answer

Zebra S600, Recieves data, but does not print


Go into the printer driver and select print a test page, does it print out?
If so then try printing from your label software, it should work, if not then it is your software that is at fault.
If the test page does not print out then check all the settings in the print driver, so they are the same as the physical label.
If non of this helps then go to www.lancerlabels.co.uk and do a live chat to Michael.


Feb 17, 2009 | Zebra Stripe S600 Thermal Label Printer

1 Answer

1050C plotter


Here is the drivers page if you need a new set:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=33712&locale=en_US&taskId=135&prodTypeId=18972&prodSeriesId=24023

Aug 27, 2008 | HP DesignJet 1050c plus InkJet Printer

1 Answer

ERROR 1200


The error 1200 refers to a problem with one or both of your cartridges, and as the printer uses these cartridges to print, it will not be able to print any recieved faxes. To avoid lost data, it blocks all fax usage as a result of recieving this message.

Nov 14, 2007 | Lexmark F4270 Plain Paper Inkjet Fax

1 Answer

1050C plotter


replace the network card, then reconfigure the IP address in the machine and that should take care of you. if not then you could have a bad emod (electronics module). also check the cat5 cable and the network drop for functionality.

Oct 11, 2007 | HP DesignJet 1050c plus InkJet Printer

Not finding what you are looking for?
Brother MFC-260C All-In-One InkJet Printer Logo

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

478 Answers

Samyfam
Samyfam

Level 3 Expert

379 Answers

Victorman
Victorman

Level 3 Expert

825 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...