Question about Audio Players & Recorders

1 Answer

Teac 2300 S troubleshooting

Seems like maybe not getting electricity

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Audio Player... Master
  • 1,258 Answers

If the unit is plugged in there may be a fuse in the back that needs to be looked at. If not then there is a fuse on the power supply or a resistor that may have opened up. After all these years there are capacitors than need to be changed in these machines- I know this because I work on them all the time here in Chicago. If the unit lights up but you have no transport first check for the dummy plug for the remote control. If that is in then it is possible that the right arm safety switch has opened up. This is work for a Technician past this point.
Teac Tascam Repairs Skywave Tape Deck Repair Bensenville IL

Posted on May 07, 2014

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I have a new spa with a Pentair Mastertemp 125. We have had issues with the heater running intermittently and making a very loud rattling noise. I've been through a long list of troubleshooting...

Maybe that at lower pump speed the water is staying in the heat exchanger too long, and the rattle you hear is water starting to boil. The high limit sensors will sense the water temp being too high and shut down the heater. If it functions normally at high speed the issue is probably with the heater having problems with slow flow through the exchanger. You may want to consider switching to an electric heater where this would not be an issue. Just a guess without being there.

Jan 18, 2015 | Pentair Pool & Spa

2 Answers

Teac DVD L700 Power Supply

The only thing I can tell you is to check the cable if its plugged in correctly... wierd! might be electricity problem to where you moved it. Did you hit it while you were moving it?

Aug 02, 2007 | Teac Legacy DR-L700 DVD Player

1 Answer

Teac troubleshooting

Find the phone number for Richer Sounds, they are helpful and deal with Teac.

Jul 22, 2014 | Teac A420 Cassette Deck

1 Answer

Have a TEAC 2300 S and the reels don't turn like it's not getting electricity. Can anyone help? Everything else works ok

Hi Roy,
It can be a number of things but the brake pads are one sure guess. I have been working on these for better than 40 years and an a past Teac Lead Technician from Chicago factory service.
I am in Chicago area but if you contact me i can direct you where to go or fix it myself. skywavebe at sbcglobal dot net.

Mar 31, 2014 | Audio Players & Recorders

1 Answer

Teac a2300

Did you try Hi Fi Engine yet- they have Pdf files for free.

Jan 31, 2013 | Audio Players & Recorders

2 Answers

We can not get ABC on TEAC HDB849 when tuning in. How do we resolve this problem?

We can not get ABC on TEAC LEDV1 982Hd when tuning in. How do we resolve this problem?

Dec 11, 2010 | Televison & Video

3 Answers

How to remove the protect signal

Make sure that your input level are not too high. They will cause the an overload in the receiver and it will clip the circuit. This will continue until you lower the level of the input that you have on at that time.


Nov 12, 2009 | Teac AG-D8900 Receiver

1 Answer

Teac GF-650

hi, please if you can open the turntable unit ,go on the part of power supply please double check the fuse first...maybe that is the solution for your problem...find the supply section ... you can find it from the AC plug going to the deck end..u

Jun 25, 2008 | Teac GF-650 Turntable

2 Answers

Threading Diagram

Send me a picture of the front of the deck and I'll mark the picture with the threading pattern, and e-mail it back. ****

Jun 12, 2008 | Teac Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts


Level 3 Expert

102366 Answers


Level 3 Expert

5056 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides