Question about AMD Sempron 2800, 2.0 GHz 2800+ (SDC2800DUT3D) OEM / Unboxed Processor

1 Answer

I bought a computer at a yard sale and the inside if the tower all the wiring to the reset, and usb are not connected i just want to put the wires back in the right place

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • AMD Master
  • 4,806 Answers

Hi there.
Get a strong flashlight and a magnifying glass (if you have one). On the motherboard look for the front panel, it should be marked PWR and coloured green, also the plug that connects to it should be marked PWR_SW. On some boards there are no colours but the markings are the same, so a good close look.
Have a look at these pictures for an idea >>>>>>

i bought a computer at a yard sale and the inside - 7b784c6.jpg

104b755.jpg


This is the USB header configurationi bought a computer at a yard sale and the inside - 9372657.jpeg;>>>>

9372657.jpeg


d713768.jpg

good luck

Posted on Jun 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need wiring manual for awia sx-fn4500


Sounds like it needs a external amp to plug into.

Oct 12, 2014 | Car Audio & Video

1 Answer

Rockwell 34 345


Assuming the power cord is 15 amp, 120 VAC, let's start with the green wire. It is a ground for human protection. It should be connected to the metal parts of the saw. Next, the white wire is a "neutral" and should be connected to one side of the motor windings. While a "neutral" is tied to ground at the power panel, it does carry electrical current.

The black "hot" wire should connect to a common or normally open terminal of the power switch. The remaining normally open terminal should connect to the common terminal of the "reset button". The reset is actually a thermal overload protection device. The three terminals should be common, normally open, and normally closed. Connect the normally closed terminal to the remaining motor winding.

P.S. The reset device may have been bypassed because it failed. Replacements can be hard to find.

Nov 02, 2013 | Saws

1 Answer

Just bought a Charbroil 4637133 Quickset grill at yard sale and it clicks but doesn't ignite. I looked underneath and on the other side of the control panel there's a wire connected to the ignitor...


the wire is supposed to connect with a small round slip-on terminal lug. They often brake at the lug, so you are left with just a hanging wire.

Look inside the grill at the burner- somewhere you will find a small metal probe pointing towards the burner. Once you find the probe, look underneath for the other end. This is where the wire is supposed to go.

Good Luck, and Thank You for using FixYa!

Jun 10, 2011 | Char-Broil 7000 Quick Set Gas Grill

1 Answer

Lost original wire connecting printer usb to tower usb. I think I have a wire that fits both usb's, but where does it go on the tower?


Hi, normally printer cables looks like this

1e5bee1.jpg

the one in the left goes in to the computer
the one in the right goes in to your printer


hope this help

Sep 09, 2010 | HP Computers & Internet

1 Answer

Where do i connect everything inside the pc?


Be calm, all wires only plug where they belong to and most times they're color coded.

1. Two cables connect to the monitor, one is a power cable and the other is a video cable, most of the times its VGA cable which end in a connector with 15 pins and a blue plastic cover, search for a blue rounded corner trapezoid in the computer tower, once you find it carefully instert the cable from the monitor and tight the screws that are at each side. image

2. If your keyboard and mouse are USB then connect them to any avaiable USB port (these are squared and the computer has many), It may be that your keyboard and mouse end in round conectors this are called ps/2 and look like this, purple is for keyboard and green for mouse.

3. This far you have connected most common input output, if you also have speakers connect its jack in the green audio socket.

Finally connect your computer to the power, this should be all.

May 13, 2010 | IBM NetVista A30p PC Desktop

1 Answer

My nintendo 64 wont come on, ON the tv.


You need a switch (transformer) to connect it to the incoming signal antenna screws. You will probably need to adapt it to a cable tv plug. The wires you connected are for the sound.

Mar 17, 2009 | Nintendo 64 Console

1 Answer

JVC Sub-Woofer


Well, sort of. It's part of a typical JVC shelf system. The gray and blue are for the left woofer and the red and black are for the right woofer. It's basically just two small "woofers" in a box. So unless you have a small amplifier that has 2 subwoofer outputs with a built in crossover, they are essentially useless.

Aug 04, 2008 | Audio Players & Recorders

1 Answer

Lexmark p3150 printer hookup


It connects to the computer with a USB cable.

You will also have to download the driver from Lexmark here:

http://downloads.lexmark.com/cgi-perl/downloads.cgi?lxkprod=Lexmark+Photo+P3150


Be sure to unplug the USB cable from the computer BEFORE installing the software, and ONLY plug it in when prompted to do so by the on-screen instructions.

Mar 24, 2008 | Computers & Internet

Not finding what you are looking for?
AMD Sempron 2800, 2.0 GHz 2800+ (SDC2800DUT3D) OEM / Unboxed Processor Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top AMD Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers

Robert Monigold
Robert Monigold

Level 2 Expert

390 Answers

David
David

Level 3 Expert

781 Answers

Are you an AMD Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...