Question about Texas Instruments TI-83 Plus Calculator

Re: scientific notation

You want to hit mode not menu and then make sure that normal is flashing instead of SCI and hit enter. so just hit mode then enter and it should be normal

Posted on Jan 14, 2008

Re: scientific notation

Press menu, there it says science or something like it

set it on float

Posted on Dec 05, 2007

Your answer is 6.7*10^18. That requires 19 places on the display: There are not enough places to write that. Besides, calculators are deigned to use Scientific Notation whenever the result to be displayed is too large or too small.

If you enjoy writing zeros, convert by hand the scientific notation into what you call long number.

If you enjoy writing zeros, convert by hand the scientific notation into what you call long number.

Jul 09, 2014 | Casio Brand New-Fx-991es Plus - Scientific...

Engineering notation ALWAYS puts the exponent as a multiple of three (kilo, mega, giga, etc). If you want the exponent as it is, use scientific notation. You can put the fx-115EX into scientific notation by pressing SHIFT MODE 7 and then entering the number of digits you want after the radix mark. Unfortunately there is no way to have the calculator adjust both the mantissa and exponent by anything other than three.

Aug 24, 2012 | Calculators

Look for a key that is marked EE, or Exp, or x10^x. To enter a number in
scientific notation, you enter the decimal part, then press the Enter
Exponent key, followed by the exponent. If exponent is negative, you
precede it with a press of the change sign key (-).

Once a number is entered there is no special treatment: multiply it divide, or add it.

Once a number is entered there is no special treatment: multiply it divide, or add it.

Mar 16, 2012 | Aurora Electronics SC150X Scientific...

Look for a key that is marked EE, or Exp, or x10^x. To enter a number in scientific notation, you enter the decimal part, then press the Enter Exponent key, followed by the exponent. If exponent is negative, you precede it with a press of the change sign key (-).

Once a number is entered there is no special treatment: multiply it divide, or add it.

Once a number is entered there is no special treatment: multiply it divide, or add it.

Mar 16, 2012 | Aurora Electronics SC150X Scientific...

You can always enter a number in scientific notation. Use the EE or the [x10^X] key to enter the exponent of 10. Whether it will remain in that form depends on the display mode you set the calculator into:SCI, ENG, NORM1, NORM2, FIX.

However if a result is too big or too small, it will always be represented in SCIentific format.

However if a result is too big or too small, it will always be represented in SCIentific format.

Sep 09, 2011 | Casio FX-300MS Calculator

The "problem" is not how to calculate with numbers expressed in Scientific Notation but how to enter a number given to you in scientific notation. Once the number is entered you do not have to do anything special. If you have to multiply it use the (x) button. to add it use the + button, etc.

How to enter a number in scientific notation.

Type in the mantissa (example 6.022)

Press the [X10^x] at the bottom of keypad.

Enter the exponent (example 23)

with this example you will have entered Avogadro's number 6.022x10^23

Other example

1.6 [X10^x] (-) 19 enters the electron charge in Coulombs. The exponent is negative that is why you press the change sign key (-).

How to enter a number in scientific notation.

Type in the mantissa (example 6.022)

Press the [X10^x] at the bottom of keypad.

Enter the exponent (example 23)

with this example you will have entered Avogadro's number 6.022x10^23

Other example

1.6 [X10^x] (-) 19 enters the electron charge in Coulombs. The exponent is negative that is why you press the change sign key (-).

Aug 24, 2011 | Casio fx-300ES Calculator

Press 2nd [SCI] to switch the calculator to display all results in scientific notation. The results are the same whether you do it in scientific notation or not, it's just how the number is displayed.

Feb 13, 2011 | Texas Instruments TI-30XA Calculator

Check this HP FAQ:

Setting a Fixed Decimal Place You can download the manual and user guides for your calculator from here:

http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=81575&lang=en&

For more information, Faqs & how-Tosgo the HP support homepage for your calculator:

http://h10025.www1.hp.com/ewfrf/wc/product?lc=en&dlc=en&cc=us&lang=en&product=81575&

Introduction This document describes how to set the desired number of decimal places on the HP 12c calculator in standard format. It also covers how to enter a number in scientific notation. Instructions for standard format

Introduction This document describes how to set the desired number of decimal places on the HP 12c calculator in standard format. It also covers how to enter a number in scientific notation. Instructions for standard format

Setting a Fixed Decimal Place You can download the manual and user guides for your calculator from here:

http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=81575&lang=en&

For more information, Faqs & how-Tosgo the HP support homepage for your calculator:

http://h10025.www1.hp.com/ewfrf/wc/product?lc=en&dlc=en&cc=us&lang=en&product=81575&

Introduction This document describes how to set the desired number of decimal places on the HP 12c calculator in standard format. It also covers how to enter a number in scientific notation. Instructions for standard format

- Press and release .
- Press the number key for the desired number of decimal places to be displayed to the right of the decimal point (0 through 9). The calculator displays a maximum of 10 digits.

Introduction This document describes how to set the desired number of decimal places on the HP 12c calculator in standard format. It also covers how to enter a number in scientific notation. Instructions for standard format

- Press and release .
- Press the number key for the desired number of decimal places to be displayed to the right of the decimal point (0 through 9). The calculator displays a maximum of 10 digits.

Aug 24, 2009 | HP 12c Calculator

Basically you first have to put your answer into scientific notation by pressing the 3rd key then the 6 key. The screen display should change to one big zero and two small zeros.

I was workinggon the same problem with a -log of a chemistry problem to get pH and I knew the answer because I calculated it on it TI-85, but we are not allowed to use graphing calulators on the exam (:-((() so I had to figure out how to do it on this one!

For example, I had pH =-log(2.828947x10^4)

On the TI-36X you change to scientific notation using the instructions above. Once the three zeros enter on the screen:

[4]

[-]

[2nd]

[10^x]

1^-04 should appear on screen, then you multiply by 2.828947

[x]

[2][.][828947]

then your screen will show the answer in scientific notation.

2.828947 in big numbers and in small numbers -04

From there you simply press:

[log]

and your answer will show up as a negative number. Just take the absolute value of that and you have your answer. Took me like 30 minutes the night before a huge chemistry exam to figure that out! Hope it helps someone!

I was workinggon the same problem with a -log of a chemistry problem to get pH and I knew the answer because I calculated it on it TI-85, but we are not allowed to use graphing calulators on the exam (:-((() so I had to figure out how to do it on this one!

For example, I had pH =-log(2.828947x10^4)

On the TI-36X you change to scientific notation using the instructions above. Once the three zeros enter on the screen:

[4]

[-]

[2nd]

[10^x]

1^-04 should appear on screen, then you multiply by 2.828947

[x]

[2][.][828947]

then your screen will show the answer in scientific notation.

2.828947 in big numbers and in small numbers -04

From there you simply press:

[log]

and your answer will show up as a negative number. Just take the absolute value of that and you have your answer. Took me like 30 minutes the night before a huge chemistry exam to figure that out! Hope it helps someone!

May 09, 2009 | Texas Instruments TI-36 X Solar Calculator

Hello,

1. To convert a number to scientific equation, use [2nd][Sci]

Exemples 12345 [=] screen shows 12345 Then [2nd][Sci] coverts it to 1.2345 ^04 to the power 4.

2. To enter directly a number in scientific notation (e.g. -1.2345 X10^(-65) a very small number) you use the [EE] key 1.2345[+ /-][EE][+/-]65 shows as -1.2345 -65

1.6X10^(-19) 1.6[EE][+/-]19 shows as 1.6 -19

Hope it helps

1. To convert a number to scientific equation, use [2nd][Sci]

Exemples 12345 [=] screen shows 12345 Then [2nd][Sci] coverts it to 1.2345 ^04 to the power 4.

2. To enter directly a number in scientific notation (e.g. -1.2345 X10^(-65) a very small number) you use the [EE] key 1.2345[+ /-][EE][+/-]65 shows as -1.2345 -65

1.6X10^(-19) 1.6[EE][+/-]19 shows as 1.6 -19

Hope it helps

Jan 09, 2009 | Texas Instruments TI-30XA Calculator

885 people viewed this question

Usually answered in minutes!

I have tried this as well as clearing the memory and resetting defaults and it still wont get out of that mode what should I do.

scientific to decimal notation

×