Station asking to register

hi Lloyd,
need more info about your setup to help you. is this a stand alone station or connected to a server? your question wasn't clear about this.
sysadmin@ccybernet.com
Feel free to email me with more details if need be.

DCX400 with DECT4096 base station - tried all the above, the last post by clay1333 finally did it. THanks!

here is the solution for u friend....the download link is in the below link
http://www.wireless-driver.com/buffalo-wlicfs11g-wli2cfs11-wireless-windows-driver/
1. click on the download link in the above page for the download to start 2. A .rar file will be downloaded 3. extract it 4. run the set up to install it 5. problem solved:-)
"fell free to ask further help friend...am here to guide u based on computers:-)"

This is the link for 2.0 version. Hope it helps. http://kb.netgear.com/app/products/model/a_id/2559 After you get there you DO NOT have to register! Just indicate that you have already registered this product and when it asks for email indicate no thanks.

Wireless adapters come with an installation disc.Uninstall the wireless adapter and then reinstall it,this should start the ball rolling,but some wireless adapters must use a wireless router plugged in to the main phone socket via the filter RJ11 PLUG,OR RJ45(A SLIGHTLY BIGGER PLUG)WHEN YOU SET THIS UP THE ADAPTER WILL PICK UP THE DATA FROM THE ROUTER,AND YOUR ON THE INTERNET.WIRELESS ADAPTERS WON'T RECEIVE ON THEIR OWN UNLESS YOUR NEAR A PICKUP STATION LIKE AN INTERNET CAFE OR A RAILWAY STATION.Go to an electronics shop like MAPLINS,and buy a wireless station detector.Then you will have to pay about from .99p to log on to a wireless cell..99p will give you about an hour on the net.GOOD HUNTING.

egistering Base Station on Polycom SoundStation 2W
Hold down 1,4 and 9 until green & red lights flash. Then hold down the page on the base station.
OR
You can register the base station to the console by:
1. press menu key
2. Select Admin Setup
3. Select Registration
4. You will see "Register with Base Station" in display. Press the Register softkey.
5. You will see "Power cycle base station then press ok". Unplug base and plug back in and press OK softkey.
6. You will see "Press and hold the paging button on the base for 10 seconds"
7. You will see Registering in the display on the console and then it should go to ready mode.

you need to use station mode and it`s not like it`s unsecure.every network in the beginning is unsecure but you have to secure it using wep or wpa.take care

Try this link may can help you

http://www.buffalo-technology.com/products/wireless/wireless-g-125-high-speed/wli-cb-g54s-wireless-g-125-high-speed-notebook-adapter/

thanks

You dont need to register this actually. Whats inportant is the receipt for RMA (warranty).

push menu on base station - select register phone

push # sign on twx977 phone at the same time

phone will register on 9485 base station and unit