Question about Zanussi Ovens

1 Answer

Oven , light and fan not working new element fitted 2months

Timer has not worked fro ages

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Sometimes the timer display fades but still working in background, if all dead now then probably means you need new timer as ovens shouldn't work if clocks not set to manual mode.
Try turning oven on then messing with buttons, usually the 2 left buttons and one far right should do trick.. push 2 left first, keeping them pressed push far right!

warmest regards
Richard The Repairman

Posted on Mar 31, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 190 Answers

SOURCE: Bosch oven not heating to temp

Dear customer,
i recommend u to try the following routine to sort out this problem

  • Check timer and clock settings
  • Reseat the element
  • Test the element
  • Test the element connectors
  • Test the oven temperature control
  • Test the oven selector control
  • Recalibrate the temperature control

  • hope u find this useful. thank you.

    Posted on Jul 09, 2008

    • 26 Answers

    SOURCE: Neff U1721 Double Oven - No Heat

    If the fan is running then it is unlikely to be the clock/timer. Yopu need to check if there is voltage to the element but you MUST be careful to avoid an electric shock. There is sometimes a thermal cut out in line with the supply from the thermostat and that would need to be checked. If all OK the thermostat is the likely offender

    Posted on Oct 21, 2008

    barkencoa
    • 3463 Answers

    SOURCE: Neff U1661 main element doesn't heat up

    Hi.

    Yes ,it is the element.

    You need to remove the panel at the rear of the oven, this will give you access to the element.

    Good luck

    Posted on Nov 21, 2008

    • 1 Answer

    SOURCE: oven switches 'itself' off without the timer

    I sorted it it is a simple solution, if you take the top of your oven you should see the problem...it will be big and black..dont spend a ortune getting it sorted i brought the part off ebay for less than a fiver.. just cant remember what it was called..very simple to fix though.  Mike

    Posted on Jan 09, 2009

    apart4u
    • 213 Answers

    SOURCE: Zanussi ZDQ 595 fan oven not heating

    Here is a free video to help you with your cooker fan motor problems and how to fix them
    For all your free videos on appliance repairs remember to mark us down and leave feedback please
    For all your parts visit our site http://www.apart4u.co.uk

    Posted on May 27, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Need to put new bulbs and elements in fan oven


    the bulbs are screw fit normally Neff fan oven element video. 1, If the fan motor . in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
    To gain access to the NEFF element .you will have to remove the back plate from inside the oven. Once removed you will see the fan and element,. if you look closely at the element .you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.
    2, If your NEFF fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
    3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your NEFF oven thermostat
    4, A quite common and easily overlooked answer is if your NEFF oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.


    For all Free appliance repair videos visit our VIDEO TUTORIALS

    Jan 12, 2010 | Ovens

    2 Answers

    The bottom (fan oven) of my Neff U1721 made soft bang noise and failed. The fan stopped, the oven light went out and the thermostat light. I replaced the burnt out heating with a new element with a 32.5...


    The power to the fan and thermostat is the fault. You will need to trace wiring from these elements to power source and I suspect that where the power cord meets the oven is where you'll find the cause.

    Dec 15, 2009 | Neff U1721 Double circotherm Electric Oven

    2 Answers

    I have a Neff U1721 circotherm oven. The lights come on and the fan works but it does not heat up. What could be the problem?


    For all Free appliance repair videos visit our VIDEOTUTORIALS Nefffan oven element video1, If the fan motor in the back of the oven is going round andthe temperature light is on (normally little red light), but there is no heatthen you will probably need a new oven element, these are generally very easyto fit and readily available from our website these can be tested with aelectric meter.
    To gain access to the NEFF element you willhave to remove the back plate from inside the oven. Once removed you will seethe fan and element, if youlook closely at the element you willprobably see a small hole burnt in it where it has blown. Sometimes howeverthere is no evidence of a fault but the element is open circuit ie:broken inside the element casing, either way it will need replacing. Someelements will are fixed from inside the oven and some are held in place by nutsfrom the rear of the machine.
    2, If your NEFF fanoven is getting warm but takes a very long time to cook or is burning the foodmore on one side than the other, then you need to check if your oven fan motor is working you willsee the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven thenyou need To replace the oven fan motor is a little moreexpensive and a bit more involved.
    3. If you have the opposite problem ie: your oven is over heatingand burning everything then you will need to replace your NEFF oven thermostat
    4, A quite common and easily overlooked answer is if your NEFF oven is not working at all ie: noheat and no fan then the chances are that someone has put the oven timer into AUTO mode,simply put oven back to MANUAL mode and all should be working again.

    Nov 13, 2009 | Neff U1421 Double circotherm Electric Oven

    2 Answers

    Neff 1721 0ven element not working??


    did you replace both fuses, if its a 240 volt element check the other fuse on the other leg of input power/120 volts + 120 volts = 240 volts

    Oct 05, 2009 | Neff U1721 Double circotherm Electric Oven

    2 Answers

    No heat on bottom oven. fan running but not heating up


    Neff fan oven element video. 1, If the fan motor . in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
    To gain access to the NEFF element .you will have to remove the back plate from inside the oven. Once removed you will see the fan and element,. if you look closely at the element .you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.
    2, If your NEFF fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
    3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your NEFF oven thermostat
    4, A quite common and easily overlooked answer is if your NEFF oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.


    For all Free appliance repair videos visit our VIDEO TUTORIALS

    Jul 19, 2009 | Neff U1421 Double circotherm Electric Oven

    2 Answers

    Oven not heating


    Hello.
    If the fan is working, but there is no heat, then it is the fan oven element that needs to be replaced.
    It has nothing to do with timer on this occasion.
    Remove panel at rear of oven compartment, there you will see the round element.
    Undo fixing screws,and remove element, disconnect leads and fit onto new element, refit new elemrnt, replace cover, and job done!!!

    Please leave a fixya rating for my solution.
    Thankyou

    Feb 04, 2009 | Hotpoint DY46 Style Line Stainless Steel...

    1 Answer

    Light and fan come on but oven does not heat up


    If the fan comes on, it will not be the timer, it will be the oven element not working.
    Remove inner rear cover of oven, and you will see the element, remove screws and element, detach wires and fit on new element, be careful not to loose the wires behind rear of oven.
    You may not see anything wrong with element, but the odds are that is the prob.
    Please leave a fixya rating for my proposed solution.
    Yhanks.

    Jan 30, 2009 | Electrolux EOB5665G Ultrafan Electric...

    1 Answer

    Electrolux double oven does not get hot


    If it is a fan assisisted oven and the fan is still working, then you need a new oven element fitting.
    Plz rate my solution.
    Thanks.

    Jan 11, 2009 | Electrolux EOU6330 Electric Double Oven

    1 Answer

    Neff B1432 Oven Not Heating; oven light flickering


    If the fan is working o/k then you need a new element fitting.
    Remove the panel at the rear of the oven, there you will see the element, remove the fixing screws and ease the element forward,taking care not to lose the wires, disconnect the leads and fit new element.
    The light flickering is probably the bulb not screwed in propely or a bad contact, nothing to worry about.
    Plz rate my solution.
    Thanks

    Dec 19, 2008 | Neff B1432 Single circotherm plus Electric...

    2 Answers

    Smeg oven


    This tutorial will show you how to check your Smeg element and how to replace your Smeg cooker element.
    Here are the 3 main faults to look for in your oven or cooker that is not heating
    1. Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Smeg manual.
    2. If you're Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
    3. When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.
    If this helped like us on facebook please
    How to Video Tutorials on Domestic Appliances
    How to Video Tutorials on Domestic Appliances

    Dec 08, 2008 | Smeg SE399X/5 Stainless Steel Electric...

    Not finding what you are looking for?
    Ovens Logo

    Related Topics:

    74 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Zanussi Ovens Experts

    ashburton

    Level 3 Expert

    417 Answers

    Flipper

    Level 1 Expert

    18 Answers

    Cindy Wells

    Level 3 Expert

    5102 Answers

    Are you a Zanussi Oven Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...