Question about Aiptek MPVR Digital Camera

1 Answer

My camera will not stay on

I have been doing ok with my camera and it's been taking wonderful pictures but the last time i had turned it on it took one picture then the light blinked a few times and then it shuts off. and the only way it turns on is if i remove the batteries and begin over.  but it keeps on doing it now and the batteries are charged.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hi Sarah,
I had the same problem. What I did was to remove then reinsert the battery and turn the camcorder on. I let the battery run down (discharge) completely, then plugged it in to the charger overnight. Doing a little more research on this camcorder, I found that if it hasn't discharged completely when you recharge then the battery holds less charge each time until finally you get next to no battery use. Discharging completely may be an option. Hope it works!

Posted on Dec 05, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a samsung SL620. I was wondering if there is a way to set the camara so that there is no deal when you snap the picture. Every time I take a pic of my grandkids they have already turned their...

WOW! The little guys are fast!
Mine come out blurred most of the time, unless it's outside with lots of light.

Sadly, the average digital cameras need that time delay to focus and adjust for light conditions and such.
You could press the button without waiting for this, but the camera will do its own thing, like take its time to focus and adjust and then take the picture.

The Manual setting could help a bit if you always stayed at the same distance and in the same light conditions, but you'd have to preset everything. Not enough time for that, right?

Does your camera have the feature where you can take several pictures in quick succession?
I have a Kodak Z712-IS and it is capable of doing it, but I'd have to use ESP to know when to start snapping pictures, and hopefully one comes out OK.

Jun 16, 2011 | Samsung SL620 Digital Camera

1 Answer

Camera won't stay on, even with new batteries that I know are charged.

Ensure you are using alkaline batteries and that battery contacts have no oxide or liquid on top of them. If you do not use alkaline batteries this is normal.
If batteries are ok is a short circuit.

Jul 29, 2008 | Konica Minolta DiMAGE Z5 Digital Camera

2 Answers

Kodak Easy Share V1003 -Screen stays a grey blue color.

A new screen is availably from virtualvillage dot com for about $45. I replaced one last week. It only takes 20 minutes and a small screwdriver. The ribbon cable is held in by a flip up lock at the main board.

Aug 06, 2009 | Kodak EasyShare V1003 Digital Camera

1 Answer


The camera is stuck in picture review mode. Try sliding the mode switch back and forth a couple times, and leave it in camera mode to see if this corrects the problem.

Apr 02, 2009 | Canon PowerShot A70 Digital Camera

1 Answer

My camera screen is black.

If the new pictures are all black, then the problem is not on the LCD display, but it is a faulty CCD sensor.

The CCD image sensor is the device that captures the picture .

CCD sensor is covered even after warranty, contact canon ringing the phone number listed on the owner manual.

Mar 28, 2009 | Canon PowerShot SD800 IS / IXUS 850 IS...

2 Answers

Konica minolta dimange x50 problem..

Please advise, my dimage x50 wont focus clearly pictures are blurred is there a way to correct this?

Apr 02, 2008 | Konica Minolta DiMAGE X50 Digital Camera

1 Answer

Black screen when trying to take pictures

i just got a new camera the dimagne x50
and i brang it out today and it was working fine it didnt drop or anything
i took a picture then turned it off then i turned it on agian and when it was on the camera format the light kept on blinking yellow for the longest time and wouldnt let me take a picture so i tried the video format and it worked so im just wondering why the video format is working and not the camera ?
has this happened to you? is there any way of fixing it?

Apr 02, 2008 | Kodak EasyShare C643 Digital Camera

2 Answers

Last picture preview

the fix should be in the set-up menu. Look through for "post-view", which should control whether the image stays on the LCD after you shoot, and for how long.

Feb 07, 2008 | Olympus Stylus 720 SW Digital Camera

1 Answer

Camera broken

apparently i have some bad news , its the lense which is misaligned or broken in terms of gears, the thing to do turn on the camera and make sure that lens is out and then LIGHTLY tapp on the lens the direction of which you feel that the lens is not equal legnth to the outer ring > place that looks uneven

Oct 14, 2006 | Sony Cyber-shot DSC-W70 Digital Camera

1 Answer

AF problem

Jangles, I am having the exact same problem. Have you found a fix ?

Aug 13, 2006 | Nikon Coolpix 5600 Digital Camera

Not finding what you are looking for?
Aiptek MPVR Digital Camera Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aiptek Cameras Experts


Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

mohamed salim shaikh
mohamed salim shaikh

Level 2 Expert

321 Answers

Are you an Aiptek Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides