Question about Linksys Wireless-G Broadband Router

1 Answer

When i try 2 find the networks it just read cannont find addittional networks, dicoverable but networks need 2 be configured. when i use the cord it does work thats what im using now but with out it my computer has no wireless internet nor can it find any wireless networks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

Can you set with the computer very close to the Linksys, then restart the Linksys and see if anything changes?

Posted on Jun 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn on shuts off blue screen B8000028


The steps to resolve this issue on a product that you want to set up with a wireless connection and on a product that you want to set up with a wired, or Ethernet, connection differ slightly. Depending on the connection type you want to set up, select one of the following methods, and then follow the steps provided to resolve the issue.Method one: Resolve the error on a product that uses a wireless connectionStep one: Print a network configuration page
  1. Disconnect the power cord from the back of the product.
  2. Remove the phone or Internet cable that is connected to the back of the wireless router. Do not reconnect this cable until instructed to do so.
  3. Reconnect the power cord to the back of the product. If the product does not turn on automatically, press the On button (c00636182.gif ) to turn the product on.
  4. Make sure that the blue Wireless light is on. If the Wireless light is not on, press theWireless button on the front panel of the product to turn wireless on.
  5. When the product is in the ready state, press and hold the Cancel button for several seconds. The network configuration page prints.
  6. On the network configuration page, check the Network Connection Status line. If the status entry reads Ready , continue with 'Step two: Set the product IP information in the Embedded Web Server (EWS).' If the status entry reads anything else, continue with the next step.
  7. Press the Setup button (c01726396.gif ) on the product control panel, select Network , and then select Wireless Setup Wizard . Follow the instructions in the wizard to complete the configuration.
  8. When the Wireless Setup Wizard is complete, press and hold the Cancel button for several seconds. The network configuration page prints.
Step two: Set the product IP information in the Embedded Web Server (EWS)
  1. Make sure that the computer is connected to the same router that the product is connected to.
  2. On the network configuration page that you printed in 'Step one: Print a network configuration page,' look in the General Information section. Make a note of the following information.
    • IP Address
    • Subnet Mask
    • Default Gateway
    note.pngNOTE:Each of these addresses is in the IP address format. For example, 192.168.1.100 is an IP address. Make sure that you note the numbers and the dots exactly as they appear on the network configuration page.
  3. Open a Web browser, such as Internet Explorer or Mozilla Firefox, on your computer.
  4. Type the product IP address in the address bar of the Web browser, and then pressEnter . The Embedded Web Server (EWS) page for the product opens.
  5. On the EWS page, click the Networking tab.
  6. In the left pane of the Networking screen, select Wireless (802.11) , and then select theIPv4 Configuration tab in the right pane.
  7. Select Manual IP .
  8. In the IP Address text box, type an IP address that is within the range of 192.168.1.10 to 192.168.1.60. For example, the IP address 192.168.1.25 is correct, but 192.168.1.61 is incorrect.
  9. In the Subnet Mask text box, type the Subnet Mask address that you located on the network configuration page.
  10. In the Default Gateway text box, type the Default Gateway address that you located on the network configuration page.
  11. Click Apply to save these settings.note.pngNOTE:After the new IP address is set in the EWS, the computer loses the connection with the product, and the EWS page becomes unresponsive. This is expected behavior. Wait 10 seconds, and then continue with the next step.
  12. Close the Web browser.
Step three: Restart communication and complete the installation
  1. Press the press and hold the Cancel button for several seconds. The network configuration page prints.
  2. Make sure that the product is connected to the network and that the IP address matches the IP address that you typed in 'Step two: Set the product IP information in the Embedded Web Server (EWS).'
  3. Connect the phone or Internet cable to the back of the router.
  4. Continue the product installation. If the software has already been installed, insert the software CD into the computer CD drive, and then select Add A Device from the menu that appears on the computer.
If the installation is successful and the error message does not appear again, the issue is resolved, and there is no need to continue troubleshooting.If the installation is not successful and the error message appears on the product control panel, continue with the steps in the Workaround section.Method two: Resolve the error on a product that uses a wired (Ethernet) connectionStep one: Print a network configuration page
  1. Disconnect the power cord from the back of the product.
  2. Remove the phone or Internet cable that is connected to the back of the wireless router. Do not reconnect this cable until instructed to do so.
  3. Reconnect the power cord to the back of the product. If the product does not turn on automatically, press the On button (c00636182.gif ) to turn the product on.
  4. When the product is in the ready state, press and hold the Cancel button for several seconds. The network configuration page prints.
  5. On the network configuration page, check the Network Connection Status line. If the status entry reads Ready , continue with 'Step two: Set the product IP information in the Embedded Web Server (EWS).' If the status entry reads anything else, continue with the next step.
  6. Make sure that the network cable, or LAN cable, is connected to the computer and to the product.
  7. When the product is connected to the network, press and hold the Cancel button for several seconds. The network configuration page prints.
Step two: Set the product IP information in the Embedded Web Server (EWS)
  1. Make sure that the computer is connected to the same router that the product is connected to.
  2. On the network configuration page that you printed in 'Step one: Print a network configuration page,' look in the General Information section. Make a note of the following information.
    • IP Address
    • Subnet Mask
    • Default Gateway
    note.pngNOTE:Each of these addresses is in the IP address format. For example, 192.168.1.100 is an IP address. Make sure that you note the numbers and the dots exactly as they appear on the network configuration page.
  3. Open a Web browser, such as Internet Explorer or Mozilla Firefox, on your computer.
  4. Type the product IP address in the address bar of the Web browser, and then pressEnter . The Embedded Web Server (EWS) page for the product opens.
  5. On the EWS page, click the Networking tab.
  6. In the left pane of the Networking screen, select Wired (802.3) , and then select the IPv4 Configuration tab in the right pane.
  7. Select Manual IP .
  8. In the IP Address text box, type an IP address that is within the range of 192.168.1.10 to 192.168.1.60. For example, the IP address 192.168.1.25 is correct, but 192.168.1.61 is incorrect.
  9. In the Subnet Mask text box, type the Subnet Mask address that you located on the network configuration page.
  10. In the Default Gateway text box, type the Default Gateway address that you located on the network configuration page.
  11. Click Apply to save these settings.note.pngNOTE:After the new IP address is set in the EWS, the computer loses the connection with the product, and the EWS page becomes unresponsive. This is expected behavior. Wait 10 seconds, and then continue with the next step.
  12. Close the Web browser.
Step three: Restart communication and complete the installation
  1. Press and hold the Cancel button for several seconds. The network configuration page prints.
  2. Make sure that the product is connected to the network and that the IP address matches the IP address that you typed in 'Step two: Set the product IP information in the Embedded Web Server (EWS).'
  3. Connect the phone or Internet cable to the back of the router.
  4. Continue the product installation. If the software has already been installed, insert the software CD into the computer CD drive, and then select Add A Device from the menu that appears on the computer.
If the installation is successful and the error message does not appear again, the issue is resolved, and there is no need to continue troubleshooting.If the installation is not successful and the error message appears on the product control panel, continue with the steps in the Workaround section.
Or else remove CMOS battery located on formatter, wait 15mts refix then check..

Oct 06, 2011 | HP Officejet Pro 8500 Wireless All-In-One...

1 Answer

Cannont connect wireless router to computer


The wireless authentication key is your wireless router's encryption key. You need to configure the wireless card in your computer with this encryption key. You cannot access the wireless router unless this encryption is correct.

For details on wireless encryption and -
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jan 30, 2011 | Computers & Internet

2 Answers

Wireless does not seem to work any suggestios


Go to HP Wireless Printing Center.


If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 26, 2010 | HP Officejet Pro 8500 Wireless All-In-One...

1 Answer

Bigpond have sent me my 4 port Wi-Fi modem thompson TG782T Home Network Gateway, now I am sitting here trying to figure out just where everything goes!!! I received a cd rom however I can't get it to work,...


Telephone wall-plate <---- 4-strand telephone-cord ---> telephone-port in modem

AC power from wall-plate to modem.

LAN port #1 <--- Ethernet cable --> network-port on desktop/laptop computer #1.
LAN port #2 <--- Ethernet cable --> network-port on desktop/laptop computer #2.
LAN port #3 <--- Ethernet cable --> network-port on desktop/laptop computer #3.
LAN port #4 <--- Ethernet cable --> network-port on desktop/laptop computer #4.

Configure the router's wireless adapter:
* set a SSID
* set an encryption-level, e.g., 'WPA'
* set a network password

Use the SSID/password to configure your wireless devices (iPod Touch, iPad, XBOX 360, etc.)

Nov 26, 2010 | Gateway Computers & Internet

1 Answer

I cannont connect to the internet on my ps3 it keeps saying error 80710092


Hi

Check following steps:

  • If you are connecting your PS3 through a modem have you checked the connection status by turning your modem on and off.
  • You should get a NAT Type 2 if you want a reasonably good connection to the PS Network.
  • Go to ps3 net configuration, write the Ip of the ps3 maybe 192.168.1.xxx, you have to configure it manually not automatic.
  • The resolution is to put in DNS 208.67.222.222
    208.67.220.220 which is OpenDns
Check if this helps, and please do take time to rate my solution

Regards
KreativeGeek

Feb 06, 2010 | Sony Playstation 3 (PS3) Console

2 Answers

When the support assistant tries to contact the internet the notice states it cannont connect? I have a new HP dsesktop pavillion elite.


uninstakll the HP Support Assistant and download it frm HP.com by giving the correct product number and then install it back

Jan 23, 2010 | HP Computers & Internet

1 Answer

Cannont play via network


Try using your search option in startup and type in the file name and that will locate it for you.

Feb 13, 2009 | EA - Electronic Arts Command & Conquer 3:...

1 Answer

UNKNOWN  COMPUTORS  CONNECTED  TO  MY  NETWORK  I  AM  USING  A  WIRELESS   MODEM  P2602  ANY  HELPERS


avery you need to configure your router to avoid having people using your internet conection:

please provide the model and maker of your router and I can walk you through a desirable configuration. or if you want to try it yourself check on your router's manual as usually there will be instructions on what you need to do...

for you to have a general idea i suggest your read the following article that explains common things you need to set up like:
1. change the default SSID (the network name or name of your router/access point)
2. hide your ssid (so only you know the name and set up the computers you want manually to use it)
3. a network key/passphrase: so in order for other computer to join your network a key/passphrase or password is provided first
4. encryption: so your neigbors don't decipher what you're transmitting wirelessly.
5. configure your computer to access your wireless network after configure your router with the configuration you set.

http://www.home-network-help.com/wireless-router.html

if you have any questions post back and make sure to note the router model and maker

Oct 16, 2008 | Computers & Internet

1 Answer

Cannont Access Modem


1. click START-settings-Controll Panel- Network Connections
2. right click on your LOCAL AREA CONNECTION and select PROPERTIES from the menu.
3.when properties opens, select TCP/IP by highliting it, then click on the properties .
4.once the new window opens titled "internet protocol (tcp/ip) Properties you will need to check the boxs that say "Obtain an IP adress automatically" and "Obtain DNS server automatically"
5. Click on OK
6.reboot
Hope this helps, post if you need further assistance.

Oct 05, 2008 | Efficient Networks SpeedStream 5100 Modem

1 Answer

When I try to log on to the internet w/ my Playstation 2(slim) I get a "No network apdapter found" well the network apdapter is built inside to the Playstation. Can you HELP? ...


Your error probably means you have not configured the adapter to work with your network.

If your adapter is wireless, you will have to configure the network (probably an access point around your house) with its name and password.  If your adapter is not wireless, you will need to run a cord from your PS2 to your internet connection (the access point, again, or possibly the phone line).  

Aug 14, 2008 | Televison & Video

Not finding what you are looking for?
Linksys Wireless-G Broadband Router Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...