Question about Uniden BC60XLT Handheld Scanner

2 Answers

Ch lockout i bought it at a pawn worked for a couple months now it says ch lockout.whats up?

Posted by on

  • Anonymous Dec 16, 2007

    canot program channels

  • hammerking Oct 15, 2008

    Same deal here, center bottom of the screen says: L/O

    Only weather WX works. Will not scan.

    Is re-set needed, and how to go about getting it done?



2 Answers

Ok Another thing to look at the top right corner of the window and see a thing that looks like a key, That indacates that the scanner is locked and cannot be programed. In the lower left side there should be a button that has a raised bar around the button. That is the lockout key until that is pressed and you no longer see a symbol like a key in the window then now can you program the scanner.I'm saying this as i have a Bearcat 30 chan scanner that i bought about 10 years ago.also this phone # is on the bottom of the scanner. 1-800-297-1023 for service info. As it says on the tag.

P/S my scanner model # is BC60XLT

Posted on Mar 14, 2008


Does not say when this was posted. but you need to do a factory reset. It realy means that the channel in question has been locked out. button on the bottom row third from the left is the L/Out (lock out) button

Posted on Dec 05, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where can I find the instruction manual ?

You bought what from a pawn shop? You can type the make and model of your device into a search engine like and add the word "manual" to it---like this:

Brand CD player XX-400 manual

May 05, 2014 | Office Equipment & Supplies

1 Answer

Getting a lock key symbol

Take the camera back to the pawn shop in exchange for one that works.

Dec 19, 2013 | Optics

1 Answer

Just bought a Eee PC 1000HA from a pawn shop, and when I charged it and turned it on, it goes to a bios screen that says at the bottom that the hard disk is locked. It ask's for user password or press ESC...

When buying things from a pawn shop, it is wise to check it out to see if it functions properly before you purchase it.
Hard disk passwords cannot be broken/hacked, and putting a new hard disk in the laptop may not work, this depends upon the BIOS password setup.
I suggest you try and return it and get a refund.

Apr 08, 2011 | ASUS F3Jc Notebook

1 Answer

I have a Vivitar Camera that I bought from a Pawn Shop. The Flash worked fine for the first few months having it. I didn't use it for a while, and once I finally did, I heard 3 pops. After that my flash no...

The 8025 is a very cheap camera....I hope you didn't pay more than $15 at the pawn shop. Your camera has a blown flash tube. The camera could have been dropped in water by the previous owner. You could have bought one at Walmart that would have at least worked a little longer.

Jan 31, 2011 | Vivitar ViviCam 8025 Digital Camera

1 Answer

I bought gps at pond shop and it's asking me for pin?? what should i do?

Return the unit to the pawn shop. This is a PIN put in by the original user just in case it gets stolen. If the original user sold this to the pawn shop they would of removed the PIN or provided it to the pawn broker. If it was stolen there is nothing you can do but throw the unit out if the pawn broker will not help.

Jesse GPS City

Jul 13, 2010 | Garmin StreetPilot c550 GPS Receiver

1 Answer

Image Sensor Problem

Does the black line record on the tape? When you play back on a TV/Computer can you still see the black line. If you do that would be the image sensor.
Good luck!!

Feb 13, 2009 | JVC GR-D850 Mini DV Camcorder

1 Answer

I bought a cd car radio from a pawn shop as is it now needs a code to work is there a way around this?

not really, take it back to pawn shop. if its not written on the unit it would cost more to get it unlocked then a new unit

Sep 01, 2008 | Kenwood Car Audio & Video

Not finding what you are looking for?
Uniden BC60XLT Handheld Scanner Logo

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts


Level 2 Expert

211 Answers


Level 2 Expert

509 Answers

Level 2 Expert

500 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides