Question about Proform 505 CST Treadmill

Open Question

Proform 505 cst error 5E

We just moved, and have set our Pro-form 505 CST back up. The display powers on but simply displays what looks like a "5E" or "SE" on the display. If you press any button it beeps once and goes to a normal screen but none of the buttons function from there.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
SUPERMAN_B_1
  • 294 Answers

SOURCE: total blackout...neither motor or display

IS THE SAFTY CARD INSTALLED ? MOST TREDMILLS HAVE A SAFTY LOCK OR CARD THAT HAS TO BE IN OR READING FOR THE SYSTEM TO START

Posted on Apr 12, 2009

Ad
  • 103 Answers

SOURCE: Proform 8.5 ifit treadmill will not start. Power

Hello There, Unfortunately the sound are hearing is caused by a stuck button on your console assembly. When this happens you will be unable to select any buttons due to this condition.
The only fix is to replace the console assembly.
If you go to iconservice.com you can get parts and pricing information.
Get your model number before going there. Should be (PFTL788072) and is located under the walk belt on the lower frame assembly.
Good Luck! Tim

Posted on Dec 21, 2009

6ylucy
  • 742 Answers

SOURCE: Where is the reset button on my Proform 750 CS?

Check your manual, if you don´t have one, ask here to find it:
manualfox.com/link/proform.htm

Posted on Jan 15, 2010

maxtreadmill
  • 832 Answers

SOURCE: proform treadmill doesnt work

Press the Stop and the Speed Up keys down while inserting the safety key and try to get this unit in calibration mode if you cannot then, the upper console will have to be replace.

Posted on Jun 01, 2010

maxtreadmill
  • 832 Answers

SOURCE: Pro-Form Crosstrainer XP 580 Board Failure?

Their is a sensor within the incline motor casing that may not be functioning thus causing the motor to repeat the cycle. You will most likely need to replace the incline motor.

Posted on Jul 19, 2010

Testimonial: "Max was spot on - I ordered a replacement incline motor and replaced it this morning. Our treadmill is working great again. Thanks, Max!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a proform 505cst. When I push start, the motor seems to short out. The motor controller LED blinks four times.


Customer Reviews: Proform 505 CST Treadmill (2014 Model)

www.amazon.com/Proform...Treadmill.../B0048HS02...

Amazon.com, Inc.Start here. ..... I was worried it would fall out with the vibration but, as I mentioned earlier, ... The 10% incline and the max speed on this unit more than serves the need ...The sound from the belt and motor is very acceptable (but then its only been .... This morning i was using it for the first time and this treadmill seems great.

Amazon.com : Proform 505 CST Treadmill (2014 Model ...

www.amazon.com > ... > Cardio Training > Treadmills

Amazon.com, Inc.Start here. ..... The ProForm 505 CST Treadmill is designed to get you moving. ....This morning i was using it for the first time and this treadmill seems great. ... I would suggest for anyone that gets this to open up the motor cover and take a look at ...graphics on the instruction manual and figure out what piece went where .

505 CST ' Proform


Jan 11, 2016 | Proform 505CST Treadmill Walking Deck

2 Answers

Error message ERR


Product Phone Number Hours Support Website SURFboard® Cable Modems and Gateways 1-877-466-8646 Sun-Sat 7AM-11PM CST Website link Touchstone Cable Modems, Gateways and EMTAs 1-877-682-7747 Sun-Sat 7AM-11PM CST Website link DSL Modems and Gateways 1-877-466-8646 Sun-Sat 7AM-11PM CST Website link Video 1-877-466-8646 Sun-Sat 7AM-11PM CST Website link Software 1-877-466-8646 Mon-Fri 8AM-8PM CST Website link

For other Motorola products, please visit the product's website for your support questions.
Product Phone Number Hours For general product questions and technical support
on your Android-powered Smartphones and Devices
e.g. Motorola XOOM™, DROID RAZR™, DROID Pro,
Motorola ATRIX™ 4G, MOTOACTV™ 1-800-734-5870 Mon-Fri 7AM-10PM;
Sat-Sun 9AM-6PM CST Motorola Fitness Devices
e.g. MOTOACTV 1-800-734-5870 Mon-Fri 7AM-10PM;
Sat-Sun 9AM-6PM CST Non-Android Mobile Phones & Accessories
e.g. Motorola Karma™ QA1, MOTORAZR2™ V9,
MOTO™ W233 renew 1-800-331-6456 Mon-Fri 7AM-10PM;
Sat-Sun 9AM-6PM CST iDEN i-series/ic Series
e.g. i776, i425
(Nextel, Boost Mobile, and Southern Linc) 1-800-453-0920 Mon-Fri 7AM-10PM;
Sat-Sun 9AM-6PM CST TTY Support 1-888-390-6456 Mon-Fri 8AM-5PM CST
reference: http://arris.force.com/consumers/pkb_Home_ConsumerCallUsPage
Call Us

Mar 20, 2014 | Motorola Televison & Video

1 Answer

How to start and unlock from safety mode


Read you owner manual. download from

www.fitness.manualsonline.com or go http://support.proform.com/

God bless you

Sep 23, 2013 | Proform 705 CST Treadmill by Pro Form

1 Answer

Calibrate


see this steps for calibration. and fix it. God bless you

The Steps for Newer Style Console Calibration:

  1. Locate the calibration area on the rear or underside of the console (a hole, near the console's center, that goes through to the electronics board. (This hole should not have a screw in it.)

  2. Insert a pencil (eraser end), into the hole and feel around for the cal button (will click when pressed).

  3. Press the button 2 times (with the pencil eraser). The first click should show CL11 in the console, the second click should show CL21.

  4. If the process was done correctly, and CL21 appears in the console, you are in "calibration mode." The next few steps consists of pressing buttons on the console and observing settings. This will not require any other tools.

  5. Press ENTER. CL22 should display in the TIME window and (??) in the SPEED window.

  6. Press ENTER. CL23 should display in the TIME window and (??) in the SPEED window.

  7. Press ENTER. CL24 should display in the TIME window and (??) in the SPEED window.

  8. Press ENTER. CL25 should display in the TIME window and (??) in the SPEED window.

  9. Press ENTER. CL26 should display in the TIME window. You should then see the letter "E."

  10. Press ENTER. You should see "SS" or "55" in the console.

  11. Push the STOP/START button. For safety, at this point, you should step off, or be off, the treadmill.

  12. Push the ENTER button. The walking belt should start to move, accelerate to maximum speed, then stop on its own.

  13. When the belt stops, the incline should self test by raising to its highest incline position, then lowering back down to its lowest position.

  14. Once the incline test is complete, push the POWER button 2 times. The unit should shut off and the console should go completely blank. If this happens, the treadmill is done calibrating and is ready for use.

If the letter "F" appears in the SPEED or INCLINE window when the power button is pressed 2 times, the treadmill is indicating a failure somewhere either in the SPEED or INCLINE (depending on the window the "F" appeared in). Troubleshooting the failure would be the next step. The Calibration seq

Oct 15, 2012 | Proform 505 CST Treadmill

1 Answer

The display speed seems to be inaccurate.


adjust the speed sensor, see the diagram, clean it, and tight the connector very well.
However RUN the software calibration, for diagnostic, troubleshooting, and fix it.

The Steps for Newer Style Console Calibration:

  1. Locate the calibration area on the rear or underside of the console (a hole, near the console's center, that goes through to the electronics board. (This hole should not have a screw in it.)

  2. Insert a pencil (eraser end), into the hole and feel around for the cal button (will click when pressed).

  3. Press the button 2 times (with the pencil eraser). The first click should show CL11 in the console, the second click should show CL21.

  4. If the process was done correctly, and CL21 appears in the console, you are in "calibration mode." The next few steps consists of pressing buttons on the console and observing settings. This will not require any other tools.

  5. Press ENTER. CL22 should display in the TIME window and (??) in the SPEED window.

  6. Press ENTER. CL23 should display in the TIME window and (??) in the SPEED window.

  7. Press ENTER. CL24 should display in the TIME window and (??) in the SPEED window.

  8. Press ENTER. CL25 should display in the TIME window and (??) in the SPEED window.

  9. Press ENTER. CL26 should display in the TIME window. You should then see the letter "E."

  10. Press ENTER. You should see "SS" or "55" in the console.

  11. Push the STOP/START button. For safety, at this point, you should step off, or be off, the treadmill.

  12. Push the ENTER button. The walking belt should start to move, accelerate to maximum speed, then stop on its own.

  13. When the belt stops, the incline should self test by raising to its highest incline position, then lowering back down to its lowest position.

  14. Once the incline test is complete, push the POWER button 2 times. The unit should shut off and the console should go completely blank. If this happens, the treadmill is done calibrating and is ready for use.

If the letter "F" appears in the SPEED or INCLINE window when the power button is pressed 2 times, the treadmill is indicating a failure somewhere either in the SPEED or INCLINE (depending on the window the "F" appeared in). Troubleshooting the failure would be the next step. The Calibration seq

10_16_2012_12_03_14_pm.gif10_16_2012_12_03_41_pm.gif

Oct 15, 2012 | Proform Pro-Form 505 CST

1 Answer

Treadmill pro-form 705 not starting


All that I can think of is to check that the motor is getting power.

Sep 19, 2012 | Proform Pro - Form Treadmill 705 CST

Not finding what you are looking for?
Proform 505 CST Treadmill Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proform Exercise & Fitness Experts

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

128 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Proform Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...