Question about Baby Lock Sewing Machines

1 Answer

Babylock serger 5260d

Bent a needle change needle now I can not get machine to catch threads to to do over case finish stitch or a chain stitch. I threaded over & over please suggestions

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Make sure the loopers underneath are not broken. Are the needles
put in correct? One is suppose to be down and little more than the other- if you have them the same length that is your problem-
check your book

Posted on Mar 30, 2014

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 15 Answers

SOURCE: Babylock sewing machine, upper thread is bunching

the tension is wronge has the lower bobbin case been unwound and refilled)(check that this is threaded right as well)

Posted on Sep 06, 2009

  • 3 Answers

SOURCE: Bernina Bernette 600 Deco embroidery machine

It could be that there is a loose piece of thread, or some fluff which is obstructing the tension gauge. Try blowing around the theading area (or even run the hoover pipe near it to see if you can **** it out). I cleared mine by folding a piece of non fluffy material and rubbing gently between the tension dial and machine.

Good luck

Posted on May 22, 2008

  • 20 Answers

SOURCE: Feed dog on Serger Babylock 5260D

Make sure that the presser foot dial (the silver "knob") on top of the machine is not too loose. You can adjust this w/ a nickel; tighten it all the way down & then loosen about 4 full rotations for cotton fabrics. Also make sure the Differentail feed lever is on "N". You can order a book from your local Baby Lock dealership for all models. Good Luck.

Posted on Jun 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Janome ezy lock 604d


Hi Morehu, this Youtube video will help you with your problem:

https://www.youtube.com/watch?v=tICJdFZ7IxY

May 07, 2014 | Janome Sewing Machines

1 Answer

I have re-threaded, changed needles, adjusted the differential and cutting width but cannot sew a single seam without the stitches skipping, sometimes several in a row and sometimes only one.


SKIPPED STITCHES ON A SERGER

1. Is the needle bent or worn--replace

2. Is the needle inserted correctly into the needle holder--check needle

3. Is the Serger threaded correctly--rethread

4. Is the presser foot pressure right for the fabric--adjust
5. are the needles the correct ones for the serger
6. Possible timing problem--need to be checked at a sewing machine shop

Sep 18, 2013 | White Sewing Speedylock 1600 Mechanical...

1 Answer

Singer Stylist 11 Serger problems with right need skipping stitches how can I solve the problem


SKIPPED STITCHES ON A SERGER
1. Is the needle bent or worn--replace
2. Is the needle inserted correctly into the needle holder--check needle
3. Is the Serger threaded correctly--rethread
4. Is the presser foot pressure right for the fabric--adjust

Jan 04, 2013 | Sewing Machines

1 Answer

Won't form a chain stitch


You 910 serger doesn't have the option for a Chain Stitch. It is a 2, 3, or 4 thread serger. You can do a good number of different stitches but a chain stich is not one of them.

If what you mean it that it won't "chain off", meaning sew with no fabric beneath the foot as you gently pull the thread towards the rear of the machine, that could be for a number of different reasons. First, change the needles and unthread the machine and start over. If the threads are not exactly where they should be, your serger won't sew correctly. A great video on threading your machine can be seen at:http://www.husqvarnaviking.com/mediafiles/huskylock/index_en.html

Sep 12, 2009 | Husqvarna Sewing Machines

1 Answer

Feed dog on Serger Babylock 5260D


Make sure that the presser foot dial (the silver "knob") on top of the machine is not too loose. You can adjust this w/ a nickel; tighten it all the way down & then loosen about 4 full rotations for cotton fabrics. Also make sure the Differentail feed lever is on "N". You can order a book from your local Baby Lock dealership for all models. Good Luck.

Mar 19, 2009 | Singer Quantum XL-5000 Computerized Sewing...

1 Answer

Babylock Eclipse SX won't catch the overlock stitch


  • the factory default settings are 4,4,4,4 and M
  • Change the needles
  • use a can of air spray ( compressed air can sold in computer stores) to ensure there is no fabric or dust under the needle plate

Jun 28, 2008 | Baby Lock Eclipse Serger

2 Answers

2nd needle/4th thread - threading confusion


With some sergers, but not many (singer 14u64 comes to mind), the top of the stitch will be an overedge that mates with the right needle thread, and the left needle thread will appear as a separate straight stitch. When you look at the underside of the stitch, the overedge will go all the way over to the left needle (the full width of the stitch). This is normal if you have this type of machine. Another stitch some sergers do (2/4 thread sergers) is a 2 thread chain thal looks like a lone straight stitch on both sides, and a 2 thread separate overedge.

As far as the threading of the takeup, it totally depends on your model. Always post your model number when you have questions as sergers vary greatly in design.

Mar 11, 2007 | Juki MO-644D Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Lock Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Baby Lock Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...