Question about Emerson LC320EM9 32 in. LCD HDTV

1 Answer

T.V. WILL NOT TURN ON.

CHANGED BLOWN FUSE BUT STILL WON'T TURN

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My t.v. didn't have a blown fuse, so my fix may not work for you. mine would turn on and read "digital television" then go into "calibration" or "service" mode where the screen shows changing colors without ever showing a picture. by chatting online with the service department (something you may want to do), i found that by using the original remote for my t.v. i could easily hit two buttons on it to bring it out of that mode. i found one after searching extensively on amazon, bought it for $20 and this t.v. found in a dumpster has been working like new ever since. more serious problems with an emerson t.v. may not be worth putting money into as they're a low end brand of electronics.

Posted on May 15, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is this fuse blown and will a blown fuse cause the bike to shut off and not turn back on?


Hi, Frank can't tell from the picture if the metal strip inside looks broken replace it and yes a blown fuse can keep your bike from starting for more information about your question and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
What to do When Your Motorcycle Won Start
troubleshoot motorcycle not starting
Steps to Take When Your Motorcycle Won Start Dennis Kirk Powersports Blog
What Do Check When My Motorcycle Won Start Honda Shadow Forums Shadow...

Mar 13, 2016 | Motorcycles

1 Answer

Air fan won't work


It is doubtful but maybe.. Check all the fuses and see if you have a blown fuse. If so replace fuse and see if that fixes your problem.

Jan 30, 2013 | 2010 Ford Escape XLT

1 Answer

Dash lights won't turn on with the headlighs


If you know for a fact the fuse that powers the dash lights is good, you may have cooked the dimmer switch. I would want to check the fuse for power and then the dimmer switch for the dash lights.

Dec 19, 2012 | 1999 Mitsubishi Eclipse

1 Answer

Simpson espirit 750 won't turn on


Hi, This may sound obvious, but have you checked the fuse? if the machine is completly dead this may be the problem or the ON/OFF switch is faulty. If there is life in the machine the problem could be the door switch. If the fuse has blown then there could be a fault such as heater element blown, is the most common to blow a fuse.

May 04, 2012 | Simpson Esprit 750 Top Load 7.5kg

1 Answer

Sony 6060F blown fuse


hello!
there is a standard procedure for proper replacement of blown fuse: CRT TVs: unplug degaussing coil, replace blown fuse with 2amp fuse and turn on the set. If it works, reconnect degaussing coil, replace the fuse with correct value(5-8) amp, depends on model(see fuse note next to holder). Enjoy the show! If in a process of replacing the blown fuse with 2amp w/o degaussing coil it blows again, forget about the next step. Set need repair. It could be an easy one, replacing 1 or 2 shorted diodes or bridge rectifier, but could be real piece of work if the power supply got "fried". If your knowledge won't go further, than fuse replacement, I'd recommend local TV repair shop.
good luck,
Alex.

Jan 15, 2012 | Televison & Video

1 Answer

Dryer does not turn on and it does have a power source


Hello,

The usual reason the dryer won't start is a blown fuse. A blown fuse is a very common problem on a dryer,so common in fact i have written a tip covering how to check it. http://www1.fixya.com/support/r10530385-dryer_power_but_start


GENE

Oct 09, 2011 | Dryers

1 Answer

Driver side power window on a 1999 chevy silverado LS won't go down. passenger side window works. bought new switch, nothing changed. bought new regulator with motor and still, nothing changed. i...


Motor is not turning in second direction to lower window. Either the new motor is defective or the device that reverses the electricity to the motor is defective. Regulator?

Take motor out and feed it juice - will turn. Reverse polarity and it should turn in other direction.

Aug 27, 2017 | 1999 Chevrolet Silverado 1500

1 Answer

Dash board lights


Check the fuses. Under the steering wheel. If the fuse for the dash lights is blown, replace it. If it blows again, replace it again and look into what could cause the short.

The lights may also need to be changed in the dash.

The switch to turn on dash lights might be bad. If this is so, outside running lights won't work either.

Sep 07, 2011 | 1995 Eagle Talon

1 Answer

Alternator overvoltaged, car won't start no spark.


Look in the fuse box under the dash for more blown fuse, advise of which ones are blown.

Dec 08, 2008 | 1991 Toyota Camry

Not finding what you are looking for?
Emerson LC320EM9 32 in. LCD HDTV Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74482 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...