Question about Office Equipment & Supplies

1 Answer

Can't line up cover on Smith-Corone 2500 in order to lock it in place

Can't line up cover and cant lock it in place

Posted by on

  • Ethelda Rapp
    Ethelda Rapp Mar 30, 2014

    WELL, WE GOT THE COVER ON, NOW THE CARRIAGE IS STUCK. i

  • Ethelda Rapp
    Ethelda Rapp Mar 30, 2014

    HERE'S THE WHOLE STORY; i TOOK THE COVER OFF FROM MY SMITH-CORONA IN ORDER TO CLEAN IT aFTER SEVEAL TRIES i WAS ABLE TO GET IT BACK ON. bUT THEN THE CARRIAGE WAS STUCKiF YOU TRY TO TYPE. THE CARRIAGE DOESN'T MOVE, IT JUST KEEPS TYPING ON THE SAME SPOT. iN OTHER WORDS. THE LETTERS JUST KEEP PILING UP ON EACH OTHER.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 43 Answers

Not sure if this model has this but on the carrier or the part where the ribbon sets on, on the right side there is a lite blue lever that locks that in place, either pull toward the fron(keyboard) or push back may unlock the carrier...

Posted on May 02, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unlock steering wheel & ignition cyclinder to replace it with new one


double posted backup one (i gave 3 choices there)
define cant. (cant figure)
or the anti-theft bolts confusing you , the FSM covers all that
why not read that first. then ask questions.

to make cars not easy to seal they make it like this,
90 to now.
it needs to be removed the whole assembly.
anti theft bolts,off, , assmbly off, may take steering wheel off too.
the hand to lock smith (just did a 91) and he
uses special smith drift pins to drive the hidden (backside away from thieves, internal lock pin, he tumbler comes out or he drills it out.
then a new pin, and holding new tumbler, and then test it , ok ,
the reversses all above.
the fsm covers this all step by step, why must you avoid books.
or read alldata.com

Oct 18, 2014 | 1994 Toyota Camry

1 Answer

Front brakes lock up on ice covered roads


dont drive on ice coved roads.. doesnt matter what your driving if you apply brakes on an icy road they will lock up...

Jan 04, 2014 | 2001 Dodge Ram - 2500, Club cab, long bed,...

1 Answer

My smith corona xl 2500 in locked. How do I unlock it?


Hi:

Remove the ribbon and look on the right side of the carrier that the ribbon sits on. You should see a lock lever that you can push to release the locked carrier.

Andrew

Feb 06, 2011 | Smith Corona Office Equipment & Supplies

2 Answers

Where can I get a replacement safe key for model


I have a micromart electronic safe and i lost the key. The key number at the back of the plate states 024. Can you tell me where to get such key please?

Mar 04, 2010 | Safe International Digital Electronic Safe...

1 Answer

Key broke off in the key ignition switch and i cant get it out any ideas?


call a lock smith

if ignition turns turn it insert a pin or similar object into hole in botom of ignition and remove it

once removed take to lock smith have key removed and re cut
if it doesnt turn call lock smith and have them remove it and repair it lock smith will charge 100- 150 with mobile

dealer wont do mobile so tow 50 bucks then dealer charges 175 - 250 to remove and replace ignition

Jan 22, 2010 | 1990 Nissan 300ZX

1 Answer

E brake wont lock


that has to do with the pedal assm. check there first. sounds like the latch to release the brake is not retracting

May 09, 2009 | 1995 Dodge Ram 2500

2 Answers

Freezes


Are you sure the batteries are ok? the battery contacts are clean?

Jun 11, 2007 | Memorex MK1980 (14 Channels) 2-Way Radio

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...