Question about Bunn Coffee Makers & Espresso Machines
Water is coming out around the spout and around the spout can't get to the puncture devices to clean them out if that is the problem
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem. I ended up taking the coffee machine apart and found that the reason coffee trickles out around the hot water spout is that the two coffee nozzles were partially plugged. Since I Had parts of the coffee machine apart I was able to clean it easily. It may also be possible to clean the assembly using a pick of some sort and clean out the holes of the two normal coffee spouts. Inside it is just a open cavity so gentle poking around and using some steaming hot water may do the trick.
If you want to take the machine apart you need to do the following: 1) take of the warmer plate on the top - 2 storz screws but an allen key works as well 2) take off the top plate of the machine - another 4 or 5 screws - make sure you empty the beans first otherwise you will have a mess 3) remove one screw from the right hand side of the removable coffee ground tray. Once this screw is removed the front panel is free to swing open except for the pipes connecting the front 4) unclip the steam assembly - there are a couple of plastic catches on the top. this will free the steam assembly from the front panel and also free a pipe connections. The steam dispenser pipe will also come free from the steam assembly. 5) remove the coffee pipes from the up and down sliding coffee dispenser. This is a small whitish color clip with 2 pipes connecting into it. The white clip has a little plastic catch on the top that frees it. The front panel should now swing open freely. 6) remove the sliding coffee dispenser from the front door. There are 4 plastic catches, 2 on either side. the whole front sliding coffee displenser now comes free 7) Take the sliding dispenser apart by release the 4 plastic catches on the front curved planel. 8) Inside the sliding dispenser is a white plastic piece that connected to the piping released in step 5. There is a small plastic catch that needs to be pressed while pulling fairly hard on the plastic piece and bending the whole piece. 9) You will now see the plugged spouts. It goes back together really easily.
Posted on Sep 15, 2008
Try adjusting the grind four numbers coarser and brew a coffee, if you are getting the same result then the brew unit is clogged and the screen needs to be cleaned.
Posted on Jun 24, 2009
This is most likely due to a bad o'ring. The bar you speak of...Does the unit have a small spout pointing upward from the area?...with a groove? Is the o'ring in that groove damaged or missing? When the grounds are compressed in the piston, the brew unit lowers down onto this spout and seals on it. The high pressure water then is injected upward inot the brew unit. When this seal fails the water simply leaks into the tray when there are grounds providing backpressure. When rinsing and no backpressure some of the water may be getting through. Make sure you lube up any seals with a food grade lube. Olive oil will work in a pinch.
Posted on Jul 08, 2009
SOURCE: No water coming out of spout
Mine did that also. All I did was to remove the reservoir and clean it and then clean the area where the water goes into the machine under the reservoir. It worked. It was a minor clog of some kind. Also make sure the little pin that penetrates the K-cup isnt clogged. A little pin up inside will clean it out. Good luck. I also found that using distilled water makes a big difference in making better coffee and will eliminate scaling problems.
Posted on Nov 13, 2009
Testimonial: "Thanks so much for your feedback. I'm going to try that this weekend and hope that works! I did hear that about distilled water so I'll try that too"
Try...Hit the start button then Lift the lever and push back as far as possible and hold for 3 seconds. hit stop button, then close lever. this should restart machine.
Posted on May 08, 2010
Tips for a great answer:
Feb 08, 2017 | Keurig Coffee Makers & Espresso Machines
Apr 02, 2014 | Keurig Vue V700 Brewing System - 110774
Mar 27, 2014 | Keurig Vue Brewing System
Oct 28, 2013 | Keurig Vue V700 Brewing System - 110774
Mar 23, 2013 | Keurig Vue V700 Brewing System - 110774
Aug 13, 2011 | Keurig Elite B40 Coffee Maker
Mar 18, 2011 | Keurig B60 Coffee Maker
Mar 14, 2010 | Keurig B60 Coffee Maker
Nov 12, 2009 | Keurig Elite B40 Coffee Maker
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: