Question about Zyxel WAP3205v2 Wireless N300 Access Point

1 Answer

Zyxel I can't seem to get this thing set up. I gave up on it about 6 months ago and am attempting it again. I am trying to use it as a repeater and am starting completely over.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Zyxel Master
  • 3,320 Answers

OK here's the user guide. Page 33.
The problem is going to be if your wireless source for the AP's connection will allow an access point to attach to it.
You also have to remember that the AP is considered an attached device by the main router. That means no NAT, no DHCP, no nothing from the AP but a relay of the main router. It has to be on the same IP address level. If you follow the instructions to the letter it should work.

Posted on Mar 28, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace defrost timer


a bad defrost timer can be checked with a multi meter

Sep 08, 2014 | Whirlpool Refrigerators

1 Answer

Sound no picture


Like stated before--May be another bad blub, especially if you used a generic or Neolux one. A phillips bulb WILL work right. Mits sets do NOT like generic bulbs !!

Apr 05, 2014 | Mitsubishi WD-73827 73" HDTV DLP TV

1 Answer

Photosmart C6180 All in one printer will not start although live


Strange because I have the same issue, and I've had this printer for over 3 years but the problem just started about a month ago.
I reset the printer by: 1) Unplug power to the printer 2) Hold #6 on the keyboard 3) Plug power cord back in while holding #6 Eventually (10 seconds?) the printer will shut down. Once it does, release #6 and power up the printer again.
Warning: This reset all the configuration settings.
This works for me, but there is still an issue because I have to repeat this every time I turn off/on the printer.

Mar 03, 2010 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

Problem trying to change the settings in my P-2602R-D1A router.


You may want to try updating your routers firmware, it seems like it's gotten scrambled. Here is a link for your routers firmware, click the 'Download' next to 'Description'

http://www.findmysoft.com/drivers/ZyXEL-P-2602RL-D1A-3-40-ADP-1-C0-340ADP1C0-firmware-driver.html

May 12, 2009 | Zyxel P660HW-D1 Router

1 Answer

No software for zyxel p-330w router.


here is the link...

tp://ftp2.zyxel.com/ftp/pub/downloadlibrary/P-320W/user_guide/P-320W_1.pdf <<<<<<<<< user guide

ftp://ftp2.zyxel.com/P-320W/quick_start_guide/P-320W_1.pdf <<< quick start


Let me know if there is any thing you want to know..

rate me.

regards,


Dec 04, 2008 | Zyxel Prestige P-330W Wireless Router...

1 Answer

Internet connection: Zyxel and DLink


fortin


have you tried doing the master reset on the zyxel modem? they usually have that at the back.

after resetting, configure the modem and try to go into the routers ip adress to check if there is connection.

Nov 30, 2008 | D-Link DFM 562IS (DFM-562IS) Modem

1 Answer

Get message "incorrect disc"


One thing you can try and do is unplug the unit for 3 min and then attempt the dvds again

Oct 10, 2008 | Toshiba SD-V392 DVD Player/VCR

1 Answer

SOUND NO PICTURE


Hello, You have a high voltage section problem I would not suggest fixing this set on your own. You will need to take this set to the shop. Because there are no user repairable parts inside of the set.

Sep 10, 2007 | Sony KV-36XBR400 36" TV

Not finding what you are looking for?
Zyxel WAP3205v2 Wireless N300 Access Point Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zyxel Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mark

Level 2 Expert

107 Answers

Are you a Zyxel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...