Question about HP lj ent 600 m602n 52ppm ntwk mono ce991abgj

Open Question

Firmware upgrade usb error

When attempting a firmware upgrade printer continually states that the usb drive is incorrectly formatted

Posted by on

  • Richard Fiorio
    Richard Fiorio Mar 26, 2015

    use a NEW Falsh drive that is absolutely CLEAN, no other files on it except the FW upgrade. This USUALLY solves that issue. HP FW is unendingly fussy

×

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

BaronVonNuke
  • 1915 Answers

SOURCE: I HAVE UPDATED FIRMWARE HP

See this tip

I wrote this tip for another model but the application is identical for this model.

Posted on May 17, 2011

  • 1 Answer

SOURCE: Hewlett Packard Laserjet 2605dn Printer: Error 79 after firmware update

HP has now admitted their firmware update causes an irreversible corruption in the formatter board. It is hard to get them to do this, but I understand they will repair at no cost if they can determine that you did install this update.

Posted on Aug 17, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer display error99.07.20 upgrade


99.00.07 Upgrade not performed error reading upgrade
Description
A remote firmware upgrade (RFU) was not performed.
Unexpected read error when reading rest of header.
Recommended action
1. Download the RFU file and attempt the upgrade again.
2. If the error persists, replace the hard disk.
99.XX.YY
Description
Firmware installation error
Recommended action
Reload the firmware.
Basically you should try to reflash the firmware. If that doesnt work then you may have bricked your printer and shoudl consider warranty support or replacement. Good luck!

Dec 02, 2015 | HP LaserJet Enterprise 500 Color MFP...

1 Answer

Error 08 11


No communication between the product and the Touch Control Panel
Corrective action: Try the following:
1. Check the event log at the EWS support pages to see if there is another SE (for instance 07:10) and troubleshoot the problem more accurately
2. Turn off the product and turn on again, and check to see if the error remains.
3. Upgrade the firmware
4. Check the condition of the USB cable, check it is not damaged or incorrectly connected.Reconnect USB cable (from Engine PCA to the Interconnect PCA or from Interconnect
PCA to the Touch Control Panel
5. Replace the USB cable
6. Replace the Interconnect PCA, see Interconnect PCA on page 315.
7. Replace the Engine PCA see EE Box on page 281
8. If the error continues, replace the Touch Control Panel

Jan 15, 2014 | HEWLETT-PACKARD T790 InkJet Plotter...

1 Answer

Error 49.ff04 for hp cp 3525x


Normally caused by firmware.
This error can be caused by corrupted print
jobs, software applications issues, nonproduct
specific printer drivers, poor-quality
USB or network cables, bad network
connections or incorrect configurations,
invalid firmware operations, or unsupported
accessories.
Power cycle the printer. Try printing from a different application. If the error doesn't come back, it could have been caused by the other application. If it does return and you are sure that your cables(USB or network) are good, you will probably have to upgrade the firmware.

Jun 28, 2011 | HP LaserJet P4015N Printer

1 Answer

Error 61:01 - wrong file format


The "file format is incorrect and the printer cannot process the job".
But you already knew that.
Is it ALL jobs that get this error?
If it's just the one, it could be corrupted

Power off from the back of the printer. Disconnect the power cord.
Reconnect the cord and power up.
Check the "graphic language setting"...refer to the user guide.
Resend the job to the printer.
Make sure that the firmware is up to date.
Upgrading the firmware will re-install the PostScript fonts.
The file you are trying to print could be password protected. Resend job without password protection.

Mar 16, 2011 | HP Designjet T1100ps Printer

1 Answer

I have a samsung tv ue46c6000. I am trying to upgrade firmware via usb stick. I have the firmware exracted on the usb stick but when I cleck upgrade firmware. It says there is not files on the usb. Any...


I have only done this once with a tv, but the procedure was to format the thumb drive, and copy the file to the thumb drive. If there is more than just the firmware file on the thumb drive, the upgrade will not work. Try formatting the thumb drive and starting over.

Mar 06, 2011 | Samsung Televison & Video

1 Answer

Left ink cartridge incorrect


There are a small number of #23/#24 cartridges that are not properly recognized by the printer. Lexmark has a firmware upgrade to correct this issue. The upgrade for the X3430 is available from Lexmark at:

To install the firmware upgrade,
  1. Make sure the printer is ON and connected with a USB cable.
  2. Download and run the appropriate firmware upgrade for your computer.
  3. Be sure not to disconnect or power off the printer until the upgrade is complete

When the update finishes the printer will restart and will accept the cartridges. Please contact Lexmark support if this does not fix the problem.

This works for the X3550 and X4550 models. A similar patch is available for the X3430 and Z1420 models. See http://bit.ly/LoXxv

Jun 25, 2009 | Lexmark X4550 InkJet Printer

6 Answers

My Numark iDJ2 won't update it's firmware!


I've tried it with a PC, I've tried it with a Mac, I've tried it with two different memory drives, and nothing will get it to update. Numark has a quality problem they need to address soon.

Mar 28, 2009 | Numark iDJ2 - DJ iPOD Mixer Docking...

1 Answer

Changed cartridge and printer says cartridge incorrect


There are a small number of #23/#24 cartridges that are not properly recognized by the printer. Lexmark has a firmware upgrade to correct this issue.
The upgrade for the X3470 is available from Lexmark at: http://www.downloaddelivery.com/downloads/misc/Firmware_F061909_3430Series.exe

To install the firmware upgrade,
  1. Make sure the printer is ON and connected with a USB cable.
  2. Download and run the appropriate firmware upgrade for your computer.
  3. Be sure not to disconnect or power off the printer until the upgrade is complete

When the update finishes the printer will restart and will accept the cartridges. Please contact Lexmark support if this does not fix the problem.
This works for 3400 Series printers. A similar patch is available for the X3550, X4550, and Z1420 models. See http://bit.ly/LoXxv

Feb 06, 2009 | Lexmark X3470 All-In-One InkJet Printer

2 Answers

Lexmark x83 error message


there is no communication between my printer and the software.i can scan,but i can not print.

Aug 30, 2008 | Lexmark X83 All-In-One InkJet Printer

3 Answers

My mp3 player says initializing


Same here...I hate Phillips right now

Aug 16, 2008 | RCA M4204 MP3 Player

Not finding what you are looking for?
HP lj ent 600 m602n 52ppm ntwk mono ce991abgj Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...