Question about Televison & Video
I have had 4 calls to Time Warner and one call to Emerson to program my new Emerson TV. Each call succeeded in programming it,,,, for about a half hour then returned to a blank screen, A technician is coming here between 9 and 10 this AM. Is it a faulty TV? Am I not following their instructions well? Are they baffled by this conundrum? Could you send me a step by step procedure on how to solve this problem? If the Tech is not able to solve it I am going to return it to the store.
Hi, why should you need to program an emerson its factory set. Thats why i buy with credit card, any problems the place is getting it back after 2 tries, there playing you or you dont know what your doing, leave it alone and have somone with you that has more expereince! If its under warranty put it in his truck and drive them both back to there junk shop! If you didnt buy with credit card next time, most cards back you up if you have problems. In this case it seems like your the problem, but i hope not, good luck, Frank
Posted on Jun 03, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is a list of remote codes for Emerson TV: 004 009 014 023 024 025 026 027 030 032 033 034 035 036 037 038 039 040 041 042 043 045 046 049 053 116 135 147 177 179
Give them each a try (a pain I know) and please rate me if they work!
Posted on May 06, 2008
I don't know the model in particular, but most of these sets can be wall mounted if you have the screw holes for the mounting plate in the back of the set.
What I believe the tech was telling you would be that it is best to not wall mount the set. The reason is that we found that we have been seeing a higher failure rate from sets being wall mounted. This is because the surface of the wall reflects some heat back in the set, and thus causes it to internaly run warmer. This is also the same from running a set inside of a cabinet. The complete surface area behind the set being very close to the wall surface blocks cooler air circulation. It is best to run these sets on a stand that is out in the opened at least 1 foot away from any wall surface.
Posted on Jun 28, 2008
Your not alone with this problem.
I had to fix mine. The warranty is less than impressive.
The trouble is going to be the Power Supply/Backlight Inverter board.
This is the picture of yours:
This is board # BA71F0F01042. Replacement boards are hard to come by.
Fixing the board like I did seem to be the only option. If you need info on fixing it, let me know.
Posted on Jun 18, 2009
I had the same problem, so I followed these steps and it worked!
1) Turn on TV.
2) On the remote control, press TV once (it will blink once). Then press and hold SETUP until the TV key blinks twice.
3) Enter 9 9 1, (the TV key will blink twice).
4) Aim the remote control at the TV & press POWER once.
5) Press & release the CH+ key continously (you may need to press it more than 50 times!), then stop when the TV turns off.
6) Press POWER. The TV should turn on, then immediately, press SETUP to lock in the code.
Posted on Aug 22, 2009
Tips for a great answer:
Dec 25, 2015 | Emerson Televison & Video
Dec 01, 2013 | Televison & Video
Jan 23, 2013 | Televison & Video
Jan 06, 2012 | Sony Televison & Video
Feb 16, 2010 | Televison & Video
Nov 19, 2009 | Emerson EWD2202 DVD Player/VCR
Jun 15, 2008 | Emerson EWC1304 13 in. TV/VCR Combo
May 12, 2008 | Dynex 32 in. LCD Flat-Panel HDTV
30 people viewed this question
Usually answered in minutes!