Question about Panasonic Televison & Video
Hitachi htd-k210 cd try cannot open,, indicating lock in the display,, how can I remove thw lock..help me
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You may find your driver here: http://us.lgservice.com/ or here: http://www.kauaikeepsakes.com/computerguy/
Posted on Mar 22, 2008
you will need to replace both convergence ICs they are STK392-110 you will also need six resistors (2) 2.2 ohm 1watt
(2) 1.5 ohm 1watt, (1) 3.3 ohm 1watt and (1) 1.8 ohm 1watt.
You can get replacemnet ICs and resistors at te following link with free instalation instructions. Here is the link.
Posted on Jul 17, 2008
Replacing the chuck on a drill is simple when you know the trick. I worked at a tool rental center while attending college and learned how to repair many tools. Open the chuck enough to remove the screw that you will see inside the chuck. It will most likely be reverse thread. The chuck is threaded on the shaft so just simply close the chuck on an allen socket and impact off with air or electric impact tool. If you do not have an impact tool close the chuck on-to the largest allen wrench that will fit into the chuck.(with the long part of the allen wrench projecting out) You will need to set the drill into a vise or strap to work-bench, then strike allen with hammer. Most chucks are removed with one quick impact of the hammer, counter clockwise. Do not squeese the drill too tightly with vise, we used a piece of leather to protect the drill. Good luck. Enjoy
Posted on Dec 16, 2008
if locked while booting up, before even windows is loading: you've got a master password in BIOS to worry about.No way but to ask the manufacturer to remove it.
if you cannot access windows anymore after booting up:
boot up from a win cd, go through setup,
install a new copy of windows and try to find your personal files on the disk, back them up and reboot from a win cd again, this time format the whole harddisk and set up a clean, new installlation of windows.(warning: all beforehand data will permanently lost then)
Posted on Aug 04, 2009
probably a little bit late but I think I found a solution ...
1.pull the hard drive out of the laptop
2.boot computer into bios settings
3. set a new bios password and check lock computer
4.while the computer is on slide the HDD in the laptop again.
5. save and exit bios
6.fortunately in the next boot you will get your hdd back
Posted on Jan 16, 2010
Tips for a great answer:
Sep 16, 2015 | Hitachi Televison & Video
Jul 04, 2012 | Heating & Cooling
Jun 23, 2011 | Washing Machines
Mar 10, 2011 | Hitachi HTD-K170 System
Jun 05, 2009 | Computers & Internet
Apr 07, 2009 | Hitachi 18V Lithium Ion Cordless Hammer...
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: