Question about Computers & Internet

1 Answer

Sunvic select MY BURNER DOESN'T

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 27,725 Answers

MY BURNER DOESN'T What ?
Since you have not stated what its not doing
Click start control panel administration tools computer management device manager scroll down cd-dvd rom drives you might see a yellow question /exclamation mark ? ! or a red X right click to update driver

You might have to physically unplug the leads for this cd/dvd computer then plug them back in restart your this should activate the found new hardware wizard.

If this does not fix the problem it might be a registry problem

"you only need to do the following"

if you cant see your disk drive in windows explorer


Close all open programs
Click on Start, Run, and typeregedit and press Enter
Click on the plus signs (+) next to the following folders
HKEY_LOCAL_MACHINE
SYSTEM
CurrentControlSet
Control
Class
{4D36E965-E325-11CE-BFC1-08002BE10318}
This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.
Upper Filters
Lower Filters
Upper Filters.bak
Lower Filters.bak
If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

After deleting the keys, close the registry editor
Reboot your computerOpen My Computer and check to see if your CD or DVD drives have returned.
You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.

if this fails to fix the problem It could be a problem with the lens you could use a liquid type lens cleaner place 2-3 drops on top of a cd/dvd then run it

http://www.nextag.com/dvd-lens-cleaner/shop-html

http://www.infopackets.com/news/hardware/2005/20050315_clean_cd_or_dvd_rom_lens_with_a_brush_part_2.htm

Posted on Mar 26, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a kenmore stove model number 790,72403012 and 3 of the 4 burners are working. They all are getting a spark, but the front left won't fire up.


First, try to light the burner in question with a match. Just hold a match to the burner, then turn the gas on to low. If the burner doesn`t light, the problem is the gas supply to the burner. Next, lift the top cover and put the prop rod in the hole in the cover to support it. Hold a match to the left-front burner. Now, turn the control knob to "light". You should see the igniter spark and hear a snap. If this doesn`t happen, repeat this step with the left rear burner. If you hear the spark and snap.
If the igniter doesn`t work on the front left burner, but does on the rear left burner, the igniter does work. The problem is likely the control knob for the left front burner. The. Control knob includes the electrical switch the activates the igniter when you turn on that burner.

Jan 26, 2015 | Kenmore Kitchen Ranges

1 Answer

Vibration coming from room thermostat


Transformer or relay going out.

Apr 10, 2013 | Heating & Cooling

1 Answer

How do i set the timer on a sunvic mp2 cb3303 clockbox?


Hi send me your email and I will send the information.
Kutaiba
deltaservicesuk@yahoo.co.uk

Dec 19, 2012 | Audio Players & Recorders

2 Answers

Broiler burns but the bottom burner on the stove will not come on the glow igniter turns orange but the burner doesn't light also one eye doesn't light, the striker sparks but the burner...


Hello,

FOR THE OVEN NOT HEATING

The problem beleive it or not is that the bake igniter is weak ,and it is not drawing the proper amprage to open the gas valve.If you have a amp meter access the wires to the bake igniter(usually behind the storage drawer) and check for 3.3-3.6 amps when oven is set to bake by clamping the meter around ONE wire wire of igniter make sure only one wire,either one and not both.
if amp draw less than 3.3-3.6 amps replace bake igniter. I know it seems improbable that if the igniter comes on that it could be the problem.Professional appliance technicians who would charge a average of $250.00 to repair your oven,have found when the igniter comes on yet the oven won't heat that a weak igniter is the cause 100% of the time

FOR THE SURFACE BURNER NOT LIGHTING The holes on the burner espically those around where the electrode are dirty/clogged. By using a paper clip/safety pin to push in and clear the holes then clean the burner up with some steel wool the burner should light. GENE

Aug 29, 2011 | Maytag PGR5710 Performa Gas Kitchen Range

1 Answer

I get no burn options, i click burn now and all of the options are greyed out. i just purchased a external dvd rom burner i have used it to burn a disk once lat week.


Dana make sure you select the right drive to burn your DVD .If you have more drives maybe the wrong one is selected on the software .Since it doesn`t have a blank DVD in it , all the options will be greyed .Just take a look and maybe this is the cause .

Aug 26, 2011 | Computers & Internet

1 Answer

When i try to burn anything using a sony dvd -r disc it doesn't burn


Have you tried using a different burning software?
IMGBurn is a great, free alternative burning solution. Simply download and install it, then open it, and it should automatically detect your DVD burner. Select what you would like to do, then click burn!
IMGBurn website: http://www.imgburn.com/
-dwmcc

Jun 13, 2011 | Sony DRU835A 18x Internal Dual-Layer DVD...

1 Answer

Hi there can you tell me how to set my sunvic 207 XLS as it was installed and I was not given the instructions


Use a non-metallic pointed tool on the reset button, or go to the sunvic website for pdf manuals.

Sep 25, 2010 | Heating & Cooling

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...