Question about NEC Dterm 80 Phone Dth-8d-1 bk Tel 780571 780071 Professionally Refurbished
One extension, x106, on the NEC Dterm 80 Phone Dth-8d-1 bk office telephone system rings from time to time showing that the call is coming from x192, which is voice mail. In other words, the call is not shown as coming from an outside phone number or any of the other five office extensions. No other phone in the office does this. We recently reset voice mail on x106 because transfers to voice mail were not going through. This was fixed using the following: Speaker, Dial 42 to remove all Forwarding Then Set Call forward/b/NA again Speaker 43 190 Speaker. How can the phantom ringing be stopped?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You can toggle each individual phone extension as to whether or not it recieves a "voice" call or a "ring-first" call.
At the extension, press "SPEAKER - 60" it will display the mode. Press the * (asterick) key to toggle between the modes. Then press SPEAKER again to set.
Posted on Feb 12, 2008
for us i just found this out.
2.1 - 1:set-0:cancel
after 4 rings it goes to voicemail
this works for us.
i hope it works for others too.
turn this feature off
1.hit fwd b/na
should see the normal display then.
Posted on Jan 16, 2009
SOURCE: the forwarding just work on the inertial extension just, the problem when i set the sl 1000 the main telephone give me low battery on the screen at the begin and now the red indicator always on and
You need to replace the silver battery on the xfui card.
Also ensure to upgrade the main software to the latest version
Posted on Jul 05, 2012
You need to do this from the Admin phones, by default the lowest ext #'s on the system.
This is system programming not the phone itself.
Refer to the Attendant guide for the phone system model your phones run on.
Posted on Nov 06, 2012
Tips for a great answer:
Nov 01, 2012 | NEC Dterm 80 Phone Dth-8d-1 bk Tel 780571...
Aug 27, 2012 | NEC Dterm DTP-2DT-1 Phone
May 21, 2010 | NEC DTH-8D-1 Corded Phone
Jul 28, 2009 | NEC Dterm DTP 16D-1 Corded Phone
Jul 17, 2008 | NEC Dterm DTP 16D-1 Corded Phone
Jun 13, 2014 | NEC Dterm 80 Phone Dth-8d-1 bk Tel 780571...
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: