Question about Bose (321GS) System

Open Question

The system off automatically

The unit automatically off in 5 mins. Cannot be set on the settings menu.

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Psr s 910 keyboard. Why does it turn on for 5 minutes, then turn off?


Be sure to use the original adapter and still in good condition/normal.
Have you tried, at the time after 5 minutes then turn off, and then you restart immediately, the unit is turn ON again? Or is there a time lag to ON, after power-switch is pressed?
Errors like this one,may be due to defective adapters (works only for a moment, after being hot, stop sending voltage), and can also be caused by damage to the regulator section in PSR910.
To check this, it must open/disassemble the PSR910.
"Do not do this if you are not experienced in electronic repair.
Leave it to the experts."

At Yamaha PSR S950 keyboard, there is a setting "AUTO POWER-OFF" in the UTILITY menu.
This setting function is To prevent unnecessary power consumption. It will Automatically turns the power off if the instrument is not operated for a specified period of time. The amount of time that elapses before the power is automatically turned off can be set (default setting: 30 min.). The setting is retained even if the power is turned off.
At the PSR-S910, this function does not exist.

25916731-0iboo3zhsd2tihqbcqrvolhc-1-0.jpg
25916731-0iboo3zhsd2tihqbcqrvolhc-1-1.jpg .

Oct 20, 2015 | Music

1 Answer

Sound goes off after 15 Min


Assuming it is not hardware but soft settings...
1) Check and make sure that your TV does not have the timer set.
The Timer feature allows you to set a day and time for the TV to turn on automatically and the device and channel to display when it switches on. If the TV is already on at the requested time, the TV automatically tunes to the channel you designated in the Timer menu.
When the Timer turns on the TV, the following message is displayed: "Press a button for the TV to stay on." Press any button on the remote control within five minutes if you wish the TV to remain on.
Note: The TV clock must be set before you can use the
Timer feature (see preceding page to set the clock).
On/Off
Press down arrow / up arrow to enable or disable the Timer.
2) If not working, try SYSTEM RESET. Press SYSTEM RESET button on the front panel with pointed object (e.g. straight paperclip). TV turns off, green LED flashes for about 1 minute. When it stops flashing turn the TV on again. All settings other than Parental Lock need to be set again using the manual.
3) TV RESET. If all else fails for soft error. Your manual describes this last resort for soft type error. It could be hardware problem needing more expertise.
Manual can be viewed on a computer at
http://www.audiolabga.com/pdf/V32-V32L_Service_Manual.pdf

Aug 05, 2014 | Mitsubishi WD-62531 Projection Television

1 Answer

How to set the time on dmr eh59


Automatic clock setting is done if you initially accept to use the guide plus system (should do). Only if for some reason it does not work, you can set the clock manually following these steps Clock Usually, the unit's setup function automatically adjusts the
clock to correct time. Under some reception conditions, however,
the unit cannot set the clock automatically.
In this case, follow the operation steps below to manually set the clock.
1 Press [3, 4] to select "Off" of "Automatic" and press
[OK].
2 Press [2, 1] to select the item you want to change.
The items change as follows:
Hour,Minute,Second,Day,Month.Year

3 Press [3, 4] to change the setting.
You can also use the numbered buttons for setting.
4 Press [OK] when you have finished the settings.
The clock starts.
If a TV station transmits a time setting signal, and when
"Automatic" in the Clock setting menu is set to "On", the automatic
time correction function checks the time and if necessary it is
adjusted several times every day.








Sep 25, 2012 | Panasonic DMR-EH59 250GB Multi Zone Region...

1 Answer

Magellan roadmate 2036 how to set my local time


1. From the


Main Menu screen, tap the Settings icon .

2. Tap


System.

Setting Languages

1. Access the


System Settings menu (above).

2. Tap


Languages.

3. Tap on the desired language.

4. Tap the back arrow .

5. The Magellan RoadMate receiver will reboot if you change the language.

Setting Auto Power

Auto power is the duration of time that the Magellan RoadMate receiver remains idle before turning off

automatically.

1. Access the


System Settings menu (above).

2. Tap


Auto Power.

3. Tap on the desired duration.

4. Tap the back arrow .

Setting Brightness

1. Access the


System Settings menu (above).

2. Tap


Brightness.

3. Tap in the brightness slider to set the brightness of the display.

4. Tap the back arrow .

The


Dim on Battery Power option will prolong battery life by dimming the display while using internal battery

power. Check to turn this option on.

Setting the Time Format

1. Access the


System Settings menu (above).

2. Tap


Time Format.

3. Tap on 24 Hours or 12 hours with am/pm.

4. Tap the back arrow .

Selecting the Time Zone (daylight savings on/off)

1. Access the


System Settings menu (above).

2. Tap


Time Zone.

3. Check Auto Time Zone or select your time zone from one of the cities in the list.
4. Tap the back arrow .

Jun 27, 2011 | Magellan 2036 GPS Receiver

2 Answers

When eject is pressed, display says locked!


cant open or close dvd player.says locked.can use remote to play etc but cant open to change dvd

Mar 08, 2011 | Panasonic SC-BT200 Home Theater Systems....

1 Answer

My sharpe aqous runs for so long then a message appears saying the tv will automatically switch of in 5 mins, this appears every minute until the 5 mins are up. I have checked and the sleeper timer is set...


Tries unplug,replug tv an hour later.Let the tv reset itself.Than goto tv Menu go to PICTURE,go down to reset.This will reset everything on the tv Tuner board back to factory setting.This should solved ur problems.Not,than the tv Tuner board have intermitten isuse problems.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish Tuner board for the replacement.

Sep 13, 2010 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV

2 Answers

How do you unlock the tray for the panasonic sc-bt200 .when i press the button to insert a disc it says the word lock and it won"t open


Cannot eject disc. ≥The unit may have a problem. While the unit is off, press and hold (>> / >>I) and (< OPEN/CLOSE) on the main unit at the same time for about 5 seconds. Remove the disc . After disc removal or if this does not work you may need to reset to factory defaults. for the player alone.

To return all settings other than some settings to the factory preset.

≥Select “Yes” in “Restore Default Settings” in the Setup menu.

This returns all values in the Setup menu and the on-screen menu, except for “Remote Control Code”, “On-screen Language”, “IP Address/DNS Settings”, “Proxy Server Settings”, “Network Service”, “DVD-Video Ratings” and

“BD-Video Ratings” to the default settings.

If this does not work then you may need to reset everything to the factory settings.

To return to the factory preset. Everything Reset.
(No setting)

≥Reset the unit as follows:

1 Press [POWER] on the unit to turn off the unit.

2 Press and hold (>> / >>I) and press [POWER] and [< OPEN/CLOSE] on the unit at the same time for more than 5 seconds until “PLEASE WAIT” is displayed on the unit.

3 The power is turned on and then turned off automatically.

Cheers!

Feb 15, 2010 | Panasonic SC-BT200 Home Theater Systems....

1 Answer

Need to clean air filter


clean the filter of your unit by pulling it fromt he unit...then after cleaning it...reset the filter counter fromt he menu settings and turn off your unit for about 5 min and there you go turn on your unit

Oct 28, 2009 | Hitachi (DT00401) Projector Lamp for...

2 Answers

Ps3 freezes within 3 mins of gameplay


my p3 will not allow me to play games or blu-ray dvd, it just dirty or damage disk

Jan 14, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

SHUTS OFF AFTER 1 HOUR


Here ya go!

Setting Auto Off (units with timer only)
On models with a glass carafe, the auto off can be set to shut the coffee machine off from 1 - 5
hours after the brew cycle is complete. The factory setting is 2 hours. On models with a thermal
carafe, the coffee machine shuts off after 20 minutes.
Note : On models without a timer the coffee machine must be turned off manually. It
will not automatically shut off.
• Press the prog button (o), immediately followed by the h/min button (n).
• The display will show the time setting.
• Press the h/min button in steps to set the auto off time.
• Press the prog button to confirm the setting.

Dec 30, 2008 | Krups FME2 Coffee Maker

Not finding what you are looking for?
Bose (321GS) System Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bose Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Ben Armstrong

Level 2 Expert

334 Answers

Are you a Bose Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...