Question about Panasonic PT-47WX53 47" Rear Projection HDTV

1 Answer

When i turn on the my toshiba theater view tv all that happens is the of/on idicater light just flashes

When I turn on my Toshiba theater view tv the red light just flashes on and off the batteris in the remote and tried using a universal remote still nothing but a flashing re light

Posted by on

Ad

1 Answer

  • Official Brand Answer
  • 350 Answers

We recommend you remove the "Digital In" cable connection from the rear of the TV and turn it back on. If the problem persists, we recommend having the TV evaluated by an authorized service center using the below link.

www.panasonic.com/repair

If the TV turns on then we recommend having the Toshiba Home Theater evaluated. Welcome to Panasonic Online Repair

Posted on Mar 26, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a toshiba theater view sd tv but my phillips universal remote input button won't work and allow me to get to video one in order to play dvd player


Universal remotes offer limited functionality such as volume changes and channel changes, muting. Often, there is no working input function with those remotes and you have to get the original one for that to work. Ouch.

Jun 28, 2015 | Toshiba Televison & Video

1 Answer

Red light on TV & won't switch on?


try the control behind tv reset service inlet .

Sep 03, 2014 | Sony Silver Tilt/Tilting Wall Mount...

1 Answer

Red Light Won't Stay On


1. Remove batteries from remote to "zero" it, then reinsert batteries
2. Turn on TV (RCA?)
3. Press and hold CODE SEARCH button until indicator lights
4. Press and release TV button. Indicator will blink and remain on
5. Enter code from list in instructions
6. Point remote at TV and press on-off button. TV should turn off
7. Use remote to turn TV on again and press CH+. If TV responds you're all set; if not, repeat the process with the next code

Nov 19, 2012 | RCA CRK76TE1 UNIVERSAL REMOTE - With...

1 Answer

Hi Hi have a toshiba regza 32av555db that was working fine however it will now not turn on, the red standby light is flashing and the green on light flashes also. I have tried a different remote for the...


Problems it is not the tv remote control.This tv have a dying power supply board,that the board where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole new refurbish power supply board for the replacement.

Jul 11, 2011 | Toshiba 32AV555DB 32" HDTV-Ready LCD TV

1 Answer

I purchased a GE Universal remote and I do not know the code to set up for MV20FM4. Please help.


HelloHello
You haven't given the model number of GE remote you have purchased. Yet I hereby give you some universal remote codes for Toshiba TV/VCR combo. Try with these. If you fails to synchronise with; inform me the model number of your GE Universal remote:
Four digit codes for Toshiba TV/VCR combo are: 0260 0358
Three digit codes for Toshiba are: 013/ 049/ 089/ 105/ 109/ 117/ 118/ 120/ 159/ 178
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
OK. Thanks for using Fixya.

Apr 07, 2011 | Toshiba MV20FM4 20 in. TV/VCR Combo

1 Answer

Need universal remote control code


Hello
Three digit universal remote control codes for Toshiba are:-

013/ 049/ 089/ 105/ 109/ 117/ 118/ 120/ 159/ 178

Four digit universal remote control code for Toshiba are:-

0159 0178 0109 0120 0181 0105 0049 0095 0170 0260 0358 0394 0924 0012 0095 0117 0141

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
OK.

Dec 03, 2010 | Toshiba MW27FPX 27 in. TV/VCR/DVD Combo

1 Answer

Rca universal remote (rcr3273) no manual- need


I don't know the exact codes but here is the search method. Make sure the device is on. Hold down the tv (or whichever device your trying to program) button and the power button simultaneously until the red light stays on solid. Then press the power button, it will flash one time, and keep pressing slowly letting it flash until the tv turns off. Then press the stop button...and it is programmed. Thanks

Nov 01, 2009 | Televison & Video

1 Answer

SHARP T.V. not responding to remote, but remote isn't broken


Here are the Toshiba codes for universal remote- 000,048,049,072,073,105,109,118,160,162,190,&241 try these codes and see if this works.ThankYou for using FixYa and Have a Nice day.

Feb 05, 2008 | Toshiba 50H72 50" Rear Projection...

2 Answers

Programing universal remote


Turn the TV ON. You can use the code search option by pressing Code until the LED flashes. Press the Power button until the TV turns off. Then press Enter.

Jan 20, 2008 | Televison & Video

Not finding what you are looking for?
Panasonic PT-47WX53 47" Rear Projection HDTV Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

512 Answers

The Knight
The Knight

Level 3 Expert

76060 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...