Question about HP Color LaserJet 2600n Printer

1 Answer

One side faint print in 12a tonner - HP Color LaserJet 2600n Printer

Posted by Anonymous on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 170 Answers

If its 1 specific color that is only fading then it could be a defective or low toner, also, if you pull the toner out, you should see a strip of glass in back of where you pulled it out that you may want to clean with a lint free cloth. If on the other hand the faint print runs thru all the colors then you might be looking at the ITB (intermediate transfer belt). Worse case it very well may be the mirrors inside the laser housing and unless your comfortable with digging deep into the machine, you may want to call for service...

Posted on May 16, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I want to repair my HP LaserJet 1020 Cartridge 2612A

my tonner problem is centere double line. so whats the problem for mu cartradge

Aug 10, 2011 | HP 12A Toner (Q2612A) Printer

1 Answer

I have got TONNER EXHUSTED error in my printer while it to be ready

Although the toner is exhausted, you can get faint prints & printer can be ready due to that. It also depends upon the design of the printer. Some printer transfer toner from cartridge to another non-removable compartment from where the toner is transferred to the optical drum.


Jul 08, 2011 | Office Equipment & Supplies

1 Answer

Samsung 4300 tonner exahust message

A laser printer needs toner to print, when this runs out the printer will print either blank or very faint images.
You need to replace the toner cartridge with a new one or a re-manufactured toner cartridges. Re-manufactured toner cartridges are cheaper than new toner cartridges for your model printer.

Feb 03, 2011 | Office Equipment & Supplies

1 Answer

Left side of documents print very light

this could be a problem with the tonner or the configuration of ink... in both cases try with another catridge or tonner, if the problem solves then is because the cartridge or tonner no have enough ink to print
...... if the problems persists maybe could try verifing the configuration of your printer or re instaling the printer too...

Jul 30, 2010 | HP Color Laserjet 3550 Printer

1 Answer

Replaced the power supply/controller pca on a ricoh 2210l. prints fine, but copies come out black. adjust shading procedure yields copy with vertical black stripes and sometimes a faint negative image of...


If the tonner has gone old please take it out and shake if for atleast 2 to 3 minutes before putting it back and takng printouts. The issue would resolve but its a temporariy fix as you would require to change the tonner .

Let us know if you need further clarification.


Dec 30, 2009 | Ricoh FAX2210L Plain Paper Laser

1 Answer

Graphics prints very faint on HL1450. Normal text is ok

You can check the configuration ("Properties" in the "Print..." menu) to see if there is anything you can adjust about the graphics. If it wasn´t like this before, it may be the Tonner cartridge (remanufactured cartridges, if not serviced properly). I dont know with Brothers printers, but with HP Lasers, a wrong driver can also cause this.

Sep 14, 2009 | Brother HL 1450 Laser Printer

2 Answers

Black Lines and Very Harsh noise on a new Tonner. No printing with New tonner

Those printer tonners are very tricky to refill and a bad refill induse on bad printing so you can clean the drum (the round green thing) with isopropilic alchool. If it continues it indicates that the blade ( inside tonner plastic blade that cleans the excess tonner powder) is durty and you can clean it too with the same alchool. If it continues replace the tonner cartridge.

Feb 12, 2008 | Samsung ML 1710 Laser Printer

Not finding what you are looking for?
HP Color LaserJet 2600n Printer Logo

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

1089 Answers


Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides