Question about Samsung UN55D6400 - 55" 1080p 3D LED LCD HDTV

1 Answer

How to shut off manually

Remote does not work.where is on off button

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 311 Answers

UN55D6400UF TV Will Not Power Off If your TV is on but will not power off when you press the power button, you could be having an issue with your remote control or a faulty circuit inside your TV.
To determine the source of your problem, follow these steps:

  1. Power the TV on if it is off.
  2. Unplug the TV from the wall outlet for 30 seconds, and then plug the TV back in.
  3. how to shut off manually - namo_fileview.jsp?type=nfs&pid=decisiontree&did=57355&cid=yokn68wxkhym@namo.co.kr&sep=%7c
    1. Press the POWER button on the remote control.
    2. [img src="http://support-us.samsung.com/cyber/namo/namo_fileview.jsp?type=nfs&pid=decisiontree&did=57355&cid=79HKC8BOY9YC@namo.co.kr&sep=%7C" height="51" border="0" width="50">
      • If the TV powers off when you press the POWER button on the remote control turn the TV back on continue to Step 4.
      • If the TV does not powers off then there is a problem with the remote control. Click here to go to the Remote Control troubleshooting section of this guide.
    1. Press the POWER button on the TV.
      • If the TV powers off with the remote but does not power off with the power button on the TV there could be an issue with the touch sensor on the TV. Before setting your unit up for service try these two things.
        1. Try sliding your finger accross the power button.
        2. Have other people try using the touch buttons on the TV.
        3. If either of these two options work then there is not an issue with the touch sensor on the TV. There are many variable that can limit the conductivity of a persons fingers. The conductivity of your fingers might not be enough to easily control the touch sensor on the TV.
        4. If the TV does not power off when you press either the POWER button on the TV or on the remote control, then the TV will need to be serviced. Click the Create online service request button below to have the TV repaired.

Posted on Mar 26, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there, I've just bought a One For All remote (URC-7140) and it doesn't appear to be compatible with my Samsung TV (UE224000PW) despite trying every code in their manual!! Can anyone help??


Did it not work with the simple search as shown in the manual.
where you hold the magic button for 3 seconds till a blue mode light comes on. Use mode button to select TV. Turn your TV on with the on button your TV. Press and hold the "7" button until your TV shuts off. And release the "7" button as soon as your TV shuts off.
That should be all there is to it according to he manual.

Link to manual.
Essence 4 URC 7140 One For All Global

Sep 06, 2014 | Televison & Video

1 Answer

I have a Emerson LD190EM1 Tv DVD combo. It will not work with my Dish Network remote. What is the IR code?


I also have the same tv with no luck on my dish network with the codes. However, I just did an autoscan and found the code, but it doesn't tell you what code. I am sorry I cannot give you the code, since manually entering them did not work, but the auto scan did work!

To run auto scan follow these steps.... it took me about 5 minutes to find on my dish network remote.
1. Press and hold the tv mode button until all other mode lights flash.
2. Press the red power button (not the red tv power button, but the power button which normally shuts off your receiver only)
3. Press the up button (about every other second) When your remote finds the code, your tv will automatically shut off.... once it shuts off, DO NOT press the up button again.
4. While the tv is off, press the pound (#) button.
Your remote will be programmed to your tv. Turn on your tv with the small red power button with the tv wording and test other functions (volume, etc.)

I tried this last night, waiting about 3 seconds in betwwen with no luck after 30 minutes, just a tired finger from constantly pressing the up button. But tonight I tried it on my LD190EM1 and paused for a second inbetween pressing up and almost fainted when the tv actually shut off within 5 minutes of starting! Best of Luck!!!

May 19, 2011 | Televison & Video

1 Answer

Ordered a new Toshiba SE-R0177 remote for TV model #15DLV16. New batteries installed. How do I set it up? It did not come with a manual and the original manual no longer exists. Can't find one online...


. Make sure there are working batteries in the Toshiba remote control.

2. Turn on your television set, DVD player or other device that you want to control with the Toshiba remote.

3. Find the "Recall" or "Setup" button on the Toshiba remote control. After you find it, press and hold down that button until the lights on the remote control turn on and remain lit.

4. Point the Toshiba remote at the device you turned on in Step 2 and press the button on the remote for that device.
5. Begin pressing the "Power" button on the Toshiba remote. Continue doing this until you have turned the device off using the Toshiba remote. Once it shuts off, press "Enter" on the Toshiba remote. The remote will then be programmed
OK.

Mar 17, 2011 | Toshiba Se-r0177 Remote Control

1 Answer

Mute is on won't shut off.


Tries pushes the volume button up on the remote or the tv volume manual button + - the mute,will go away,the mute button on the remote don't work?The tv remote crontrol is dying.

Feb 03, 2011 | Panasonic Televison & Video

3 Answers

I have a new prestige car remote installed recently and i have a problem how to shut off the alarm coz the installer did not or forgot to give me the manual. When i start the car remotely i press the...


You did not mention the year/make/model of your vehicle but, the issue appears to be the factory alarm. The installer failed to make the connection. If you intend to make the connection yourself I would need information pertaining to the vehicle. The (-) pulse before start wire for Prestige remote starters is black with a blue stripe. It is in a 4 pin connector at the module. This wire can be used to disarm the factory alarm before the remote start sequence.

Jan 23, 2011 | Prestige Remote Start

2 Answers

I have comcast cable. i need the 5 digit code for the remote.


here is a link to all comcast remote controls and there manuals. Code will be in the manual
http://www.comcast.com/corporate/customers/customer_support/remotes.html

Oct 17, 2010 | Sylvania LC370SL8 37 in. LCD Television

1 Answer

Remote lock key fob has new battery, it only works


I have this same problem! The Info buttons I have, it has the option "Learn Remote", but I lost my manual and cannot figure how to program the two together?

Aug 15, 2009 | 2007 Chevrolet Avalanche LTZ

2 Answers

LG wall unit reads "Co" when I try to shut it off with remote.


It's related to cleaning try to on-off auto cleaning... Works for me

May 01, 2009 | LG LS-L1210CL Mini Split Air Conditioner

1 Answer

CODE FOR A JUMBO REMOTE


Use the process called code search setting it takes a bit of extra time but some codes will work for  equipment that is not listed in the manual. If for some reason this don't work the remote you purchased will not work with that brand but this is very unlikely I believe. That process is  1. Turn on device that you want to set. 2. Aim the remote at device and press and hold down the code search button for at least 3 seconds until the red led lights up solid red. 3. Press the device button for the item you wish to program E.G. tv, dvd, vcr ect. and the led will blink once and then remain solid red. 4. press on/off button on remote slowly and repeatedly until the device you are trying to program shuts off. (Note led will blink once each time you press on/off button) 5. Once this occurs, press enter button to store the code and the led light will shut off.

Nov 10, 2008 | Televison & Video

1 Answer

I want to program my remote control to work with my direct t.v.


Look in the user manual for your remote.
You should find a table with brands and types of devices.
Your direct tv should be listed as such.
There will be a number code for the direct tv that you will need to program the remote with.
The manual should also tell you what buttons to press in order to program.
Otherwise, have only the direct tv receiver ON.
point your remote at it and press the tv button and then the power button on the remote and hold it down while pressing the cursor up and down buttons. (not channel up and down. The up and down are the ones to select other things on the remote with.
When you have the right code the tv will shut off.
After it has shut off stop pushing buttons and then press the power button on the remote.
Your direct tv should now be programmed to turn on and off with the remote.
Note: be sure when you turn various devices on or off, have it selected for that devices you are trying to turn on or off.

Apr 30, 2008 | Televison & Video

Not finding what you are looking for?
Samsung UN55D6400 - 55" 1080p 3D LED LCD HDTV Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73665 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...