Question about Pit SSR 110CC Pro Beginner Bike

2 Answers

I have got a pit bike 110 it wont start its kickin a lil bit off a spark out but i have been told its sumert too do wi flywheel i have done a new rewire any 1 no wt it is

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

It mite b something to do with your coil pack change it n c if it works

Posted on Jun 16, 2009

  • roger lindo Jun 30, 2011

    Same problem, My hot wire from my magnito it creating current, and so is my coil. The plug wont spark. It seems as though it is a solid current not a pulsing current.

  • simps09 May 31, 2014

    Have you checked the current direct from magneto then again at the coil and then the spark plug cap as it may need new wiring if there is current at all check points and no spark I would try another coil if a friend has a spare if not then it might be worth taking to garage

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same mi pitbike 125 just cut out and it has no spark i was woundering what the problem is can anyone help me please

Posted on Aug 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Theres no spark and bike wont start


you will have to check lead to spark plug then lead to coil
if your not getting spark at plug it could be a number of things ingintion
or just a loose wire best of luck hope you solve it

Mar 15, 2014 | Pit Bike 125cc 4 Stroke Dirt Bike

1 Answer

The bike is starting only with small plug gap.If we set the gap to original it wont start? tell me the reason?


.....A weak battery comes to mind for starters. A carboned up spark plug is another; start with a new spark plug. If I recall correctly from 39 years ago, your bike has ignition points and condenser. Remove the points cover (on left end of the overhead cam), and check the points. Burned? Pitted? Get a new set of points and condenser but for now, just file the points a bit using an emery board or metal fingernail file. Set the points to .015 clearance at the high point on the cam lobe. If you have a timing light you could check the timing and adjust as needed by rotating the points base plate left or right. Bad points give resistance to the flow of electricity. When the points are closed, the condenser gets charged up. Less electricity going through the points means less of a charge going into the condenser. Now the points open up and the stored charge goes from condenser to coil. The coil then produces a spark. With a low charge in the condenser, the spark is weak and will not jump a wide gap. Set the plug gap to very little and the weak spark can jump the gap. The standard gap is .028. ....... I don't recall when Honda move the points to the flywheel but the images below may help if your bike is that style. Clean any rust on noted parts; magnets and pick up coils. Okay, now I have done my part. Now you gotta do yours; please rate my answer. Thanks! tombones49_177.giftombones49_178.gif

Jun 15, 2011 | 1972 Honda CB 100

2 Answers

My pit bike 125cc wont fire up


Try unpluging the cutouts.they are usally on 2-3 places on these bikes ,brakes,also check the fuse that is on the red wire comming off the battery it will be blown or end of fuse holder will be pushed in and not touching the fuse.

Apr 13, 2010 | RTO Pit Bikes

1 Answer

No spark


there are 2 wires that go to the kill switch. bare them both and put a jumper between the 2 to insure insure its not a switch falure. if you get spark, get a new switch or continue with the jumper. be sure to keep the bare wires from touching metal or youll just ground it out again and it wont start

Feb 11, 2010 | Pit SSR 110CC Pro Beginner Bike

1 Answer

110 pit bike my pit bike starts but when i pull da


your spring might have broke on your throttle needle take apart have a look

Nov 11, 2009 | RTO Pit Bikes

1 Answer

Timing chain 110 hymoto pit bike


you have to put the piston at the top and the sprocket and crank at the bottom hope this helped

Aug 19, 2009 | Pit SSR 110CC Pro Beginner Bike

1 Answer

Flywheel doesn't spin on kick over


Flywheel has a keyway that has been sheared or bolt on shaft is loose.Either way you need to pull the flywheel and inspect it...replace keyway..reinstall retorque...Good Luck to you my friend....Tim

Apr 30, 2009 | Pit SSR 110CC Pro Beginner Bike

1 Answer

Wont fire up.


make sure the fuel/air mixture is right on the carby.. same thing happened to mine.
also try bleeding the carb using the dip pan on the bottom.

Apr 06, 2009 | RTO Pit Bikes

1 Answer

Gears


it needs new gears mate

Nov 22, 2008 | Pit SSR 110CC Pro Beginner Bike

Not finding what you are looking for?
Pit SSR 110CC Pro Beginner  Bike Logo

Related Topics:

1,245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pit Cycling Experts

john h

Level 3 Expert

12173 Answers

Mack Baxter

Level 3 Expert

381 Answers

Tim Rickards
Tim Rickards

Level 2 Expert

285 Answers

Are you a Pit Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...