Question about Samsung Ht-e5400 5.1 3d Ready Blu-ray Home Theater System W/ Wifi Hte5400

1 Answer

Source keep jumping

When I want to watch a dvd, the source keeps jumping from dvd to aux to iPod and so on. It work fine for a year and half and was used sparingly but now I'm unable to watch a movie. I changed the battery in the remote, it worked fine for one movie but now it's doing the same thing again.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Expert
  • 76 Answers

I would suspect a problem in the hardware that detects a signal in the receiver. You might be able to turn that off in the receiver system menu (check the manual).

Posted on Mar 25, 2014

  • Richard Combs Mar 26, 2014

    I called about this and all Samsung had to offer was repairing it. I don't remember if they were gonna do it for free but either way I wasn't about to pack it all back up and send it off. It's still sitting in my entertainment center. Had so much potential, too.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not change SOURCE to DVD or CD


Make sure you inform fixya re premium ending by accident to ensure you dont get double billed.

Dec 05, 2007 | Pioneer AVH-P7480DVD Car DVD Player

1 Answer

Alpine cde-9870 non-ipod mp3 player AUX FUNCTION


When you press the SOURCE/( ' ) button and select iPod as the source, make sure you turn on AUX+ so that the external device is used as the source. AUX+ is turned off when you want to use an iPod with this head unit.

I don't know why some people thought to answer your question with an answer based on a different model.

May 06, 2010 | Alpine Car Audio & Video

1 Answer

Once watching a dvd it wont let me change the surround that i want. How do i fix it?


Apparently, the use of the built-in DVD player doesn't allow sound field manipulation; but external sources can be modified. This subject is only discussed in this section of the manual...

"Enjoying audio form an external
source
You can enjoy audio form an external source through
your unit.
Press INPUT repeatedly to select the desired input
source. - AUX, AUX OPT, AUDIO IN
Setting the surround mode
You can select the Dolby Pro Logic II. Press
SURROUND to change surround mode repeatly...."

Mar 15, 2010 | JVC TH-G30 Theater System

1 Answer

Input from IPOD - I want to play music from my IPOD through my Sony STR-DE1075. I have an IPOD line out adapter. cannot figure out which input I should be using.


Any input as AUX , DVD or Tape will work fine ..whichever you connect.and/or available...But please do not ever use the "Turntable" input...make sure volume of IPOD is half way open as listening earphones not max..good luck..

Jan 07, 2010 | Sony STR-DE1075 Receiver

1 Answer

Denon AVR 1910 - no sound from v-aux or tuner


The tuner is the best source for testing audio issues from a receiver since it uses an internal source for audio. This problem could be two separate issues. Check the tuning in the tuner to make sure it is on a station that you are receiving. The newer Denons will not play any audio is the station is not coming in. Be sure your antenna is connected and tune the station to one that comes in clear.
What source is hooked up to the V. Aux? If an iPod it is common that the volume on the ipod is down .

Nov 22, 2009 | Audio Players & Recorders

2 Answers

Can't get auxiliary to work on Pioneer Mosfet Head unit 50x4


you have to turn the AUX input on through the function menu which can be accessed by following these steps

1. with the unit on. press and hold the source button unitl the unit turns of (or goes into demo mode, which is fine)

2. depending on the model that you have, you will have to press and hold the
(volume button or the audio button), until a menu is displayed.

3 . toggle through until you find AUX 1 and AUX 2. i would turn them both on and see which one you have plugged into, then you can go back and turn the other off.

4. once you have change it to ON. press the source button to turn on. the aux option should now be in your source options.

5. also, while on AUX, you can go into the audio settings and turn up the SLA (sound level adjustment) to +4

hope this helps

Aug 26, 2009 | Pioneer 50W x 4 MOSFET Apple iPod...

1 Answer

Aux


there is an interconnector to connect this unit to the aux source (CD-RB20/CD-RB10)(sold seperately).
After connecting, press SOURCE until AUX appears in the display.
Press "play" on your ipod.
i sincerely hope this answers your question.

Jul 18, 2008 | Pioneer DEH-P80MP CD Player

1 Answer

Ipod cable will not work with the DEH-P3000


Hi, On a slightly different model and only if you would venture to try: with the iPod via cable plugged to the iP-Bus port and the unit powered off but the powersupply on - 1. press and hold for a couple of seconds the Function button (FUNC) or till the clock starts to flash; 2. the arrow keys (left/right) will move you through the different menu settings; 3. the arrow keys (up/down) will move you through the different selection for each setting; 4. look for source, external, AUX, iPod or whatever will be displayed which may refer to an external input; 5. soon as you have enabled/set the AUX, press and hold the FUNC button while turning the unit on. This will save the current setup. Hope this also work for your DEH-P3000. Good luck and kind regards.

Sep 23, 2007 | Pioneer DEH-P3000 CD Player

8 Answers

Connect ipod to cd player wit built in aux input.


VERY SIMPLE SOLUTION FOR DEH-P5800MP!!!!!!

Turn unit off by holding the Source (volume knob) button until power is off.

Now, hold down the Function button (FUNC) until the unit turns on. You will now be in the Initial Settings menu, a special menu. Press the Function button (FUNC) again until you see the word AUX, press up to enable it, then press the Source (volume knob) button until you see AUX. It works now, congratulations.

Sep 22, 2007 | Car Audio & Video

Not finding what you are looking for?
Samsung Ht-e5400 5.1 3d Ready Blu-ray Home Theater System W/ Wifi Hte5400 Logo

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Audio Players & Recorders Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Electric Dime
Electric Dime

Level 3 Expert

434 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Are you a Samsung Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...