Question about La Crosse Radio Controlled Atomic Clock

Open Question

Model w86111 cant reset clock time or other functions on modelw86111

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A manual for La crosse atomic clock Model # w86111


You can find the manual for the LaCrosse W86111 on the product page: https://www.lacrossetechnology.com/w86111 . Click on the Support tab. The current link to the Manual is https://www.lacrossetechnology.com/media/catalog/product/w/8/w86111_english_033016.pdf . A Quick Start Guide is also available.

I hope this helps.

Cindy Wells

May 31, 2018 | Home

1 Answer

Settinglacrossettechnology atomic clock model w86111


Try Googling (lacrosse)(w86111)(manual) without parens to get instructions.

Mar 11, 2018 | Home

1 Answer

I have the Atomic Clock model W86111. I had to change the batteries on the outside device. The clock outside temp just flashes 63.5 all the time. How do I make it sync to the device outside?


Remove all batteries from outdoor sensor and weather station.

Press one of the buttons on the weather station at least 20 times to clear all memory.

Verify that the weather station is blank before proceeding (there may be lines painted on
the screen that will show when power is removed).

Leave both units without power for 15 minutes (very important).

Insert fresh batteries into the clock.

Insert fresh batteries into the outdoor sensor.

Press the TX button on the outdoor sensor to transmit RF signal.

Keep the outdoor sensor 5-10 feet from the forecast station.

When RF connection is established, the temperature will appear on the station. Allow the
outdoor sensor and weather station to sit together for 15 minutes to establish a strong
connection.

Oct 14, 2017 | Home

1 Answer

La Crosse Model W86111, Setting


an atomic clock ........ no user manual ?

1 Digital Atomic Wall Clock Model: W86111 ' Quick Setup Guide

pdfstream.manualsonline.com/0/0a0678fd-f9df-4e8f-8c98-0b4794c5453c.pdf

User-Manual

content.etilize.com/User-Manual/1031159306.pd


26317196-dz0hez40bltko3jrerxnoz1i-3-0_0.jpg

Oct 19, 2016 | Home

1 Answer

Batteries for clock


They could have been a bad batch of batteries. Sometimes batteries aren't fully charged as they should. Try another batch. If the same thing happens go back to the store and request either a replacement or a refund since the clock should have a 2 year warranty

May 19, 2014 | La Crosse Technology W86111 - Wall Clocks

1 Answer

Electric oven does not work


After a power failure, some models will automatically resume their setting once the power is restored. On models with a clock, you must reset the clock. If the oven was in use, you must reset it by
pressing the CLEAR/OFF pad, setting the clock and resetting any cooking function.

To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of day
cannot be changed during a timed baking
or self-cleaning cycle.
Touch the CLOCK pad twice.
Touch the + or – pads.
If the + or – pads are not touched within
one minute after you touch the CLOCK pad,
the display reverts to the original setting.
If this happens, touch the CLOCK pad and
reenter the time of day.
Touch the START/ON pad until the
time of day shows in the display. This
enters the time and starts the clock.
To check the time of day when the display is
showing other information, simply touch the
CLOCK pad. The time of day shows until another
pad is touched.

If you do not have the owner's use and care manual,
go to this website and get a free download
of your manual by clicking on your model #.
Once you have downloaded it, you can print it up.

http://sz0047.ev.mail.comcast.net/zimbra/mail#4

May 17, 2010 | Hotpoint RB757 Electric Kitchen Range

2 Answers

Cant set the clock


hi
In most brandsof microwave oven, you set the clock by one of these combinations of key presses:

Clock > time digits > Clock

Clock > Clear > time digits > Clock

Clock > time digits > Start

If that doesn't work, please reply back with your brand and full model number.
All the best and do rate this answer if u r satisfied.
thankyou

May 10, 2009 | Microwave Ovens

1 Answer

Emerson Jumbo Display CKS2237 clock radio


Sorry it took so long to get back to you with a answer to your question. You must try to reset the microprocessor in the Clock/Radio. To do this you must unplug the Clock/Radio from the A/C power source.Then remove the Internal battery(CR2430). Let the Clock/Radio set without a power source for about 3 hours. This will discharge the microprocessor and reset it. After you have discharged the microprocessor,you can reinstall the internal battery. Connect the Clock/Radio to the A/C power source. The Clock/Radio's Functions should have returned to normal function. If the Clock/Radio did not return to normal function, you must replace the internal battery and again let the microprocessor discharge. After the microprocessor has discharged,put in the new internal battery and reconnect the Clock/Radio to the A/C power source. The Clock/Radio should have returned to normal function. If you are still having problem with the functions of the Clock/Radio, You will have to call Emerson Customer Support. The telephone number for the Emerson customer support is 1-800-909-1240. you can call them between the hours of 8am-4:30pm CT. Give them the make and model number of the Clock/Radio and ask them for assistance. I hope this information help you with your problems with the Clock/Radio. Thank you for using FixYa and have a nice day!

Oct 05, 2008 | Emerson Smartset Clock Radio

1 Answer

Smart set radio cks 1851. It will not keep the time and now blacks out. New battery installed. Folled plan of reset. lasted approx 10 minutes and blacked back out. Was plugged into electric at the...


Sorry it took so long to get back to you with a solution to your problem. You must try to reset the microprocessor in the Clock/Radio. To do this you must unplug the Clock/Radio from the A/C power source.Then remove the Internal battery(CR2430). Let the Clock/Radio set without a power source for about 3 hours. This will discharge the microprocessor and reset it. After you have discharged the microprocessor,you can reinstall the internal battery. Connect the Clock/Radio to the A/C power source. The Clock/Radio's Functions should have returned to normal function. If the Clock/Radio did not return to normal function, you must replace the internal battery and again let the microprocessor discharge. After the microprocessor has discharged,put in the new internal battery and reconnect the Clock/Radio to the A/C power source. The Clock/Radio should have returned to normal function. If you are still having problem with the functions of the Clock/Radio, You will have to call Emerson Customer Support. The telephone number for the Emerson customer support is 1-800-909-1240. you can call them between the hours of 8am-4:30pm CT. Give them the make and model number of the Clock/Radio and ask them for assistance. I hope this information help you with your problems with the Clock/Radio. Thank you for using FixYa and have a nice day!

Jul 19, 2008 | Emerson Smartset Clock Radio

Not finding what you are looking for?
La Crosse Radio Controlled Atomic Clock Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top La Crosse Home Experts

The Knight
The Knight

Level 3 Expert

75591 Answers

Cindy Wells

Level 3 Expert

5481 Answers

David Burbee
David Burbee

Level 3 Expert

1871 Answers

Are you a La Crosse Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...