Question about Dell E173FP 17" LCD Monitor

1 Answer

Because of electrostatic charges and because of a wrong voltage

The monitor is not working, but the power is on with a light

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Shorted board inside monitor

Posted on Nov 23, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

X2gen MW19U Monitor Black screen but sounds like it is cycling


The monitor is on protection.

Test:

  • Video cable.
  • Video adapter on PC (sometimes integrated on motherboard)
  • Motherboard.

If it is monitor fault , then the monitor is on protection.

When on protection you keep having a flashing led on front of the monitor , and monitor turning off by itself after a while, that indicates a fault condition.

The flashing light indicates a diagnostic state called protection.
When the Monitor goes on protection there are only two possible causes.

1The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or a broken contact, identified an internal fault and kicked in , starting the flashing light.


If you are in situation one, then the monitor will reset just unplugging power cord for one or two hours,sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

Common faults that can occur are a blown capacitor on power board, faulty inverter board, faulty input board, or a fault on LCD Digital Controller board.

Check also the video cable or any external connection cable, if the cable is shorting, or the connector is bad, you can get same flashing state because of the video cable.

Try moving the video cable, and if the cable is not built in, then also try a replacement cable.

If under warranty contact the manufacturer ringing the number on the user manual

If you want to repair at your own expenses, just locate any good qualified repairer.

Mar 24, 2009 | X2Gen MG19MY 19" LCD Monitor

1 Answer

My sceptre monitor S1902D won't turn on just stopped


If the monitor has no power at all then you have a dead power board, or a broken power cord, test also a different wall AC outlet.

If instead there is a flashing led on front of the monitor, that indicates a fault condition.

The flashing light indicates a diagnostic state called protection.
When the Monitor goes on protection there are only two possible causes.

1 The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or a broken contact, identified an internal fault and kicked in , starting the flashing light.


If you are in situation one, then the monitor will reset just unplugging power cord for one or two hours, sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

Common faults that can occurr suddenly are a blown capacitor on power board, the inverter board powering up backlight lamp has blown, or a fault on main lcd controller board.
check also the video cable, if the cable is shorting, or the connector is bad, you can get same flashing state because of the video cable.

Check connectors, try moving the video cable, and if the cable is not built in, then also try a replacement cable.
Regards

Mar 06, 2009 | Sceptre S1902D 19" LCD Monitor

1 Answer

Monitor dead


If the monitor has no power at all then you have a dead power board, or a broken power cord, test also a different wall AC outlet.

If instead there is a flashing led on front of the monitor, that indicates a fault condition.

The flashing light indicates a diagnostic state called protection.
When the Monitor goes on protection there are only two possible causes.

1 The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or a broken contact, identified an internal fault and kicked in , starting the flashing light.


If you are in situation one, then the monitor will reset just unplugging power cord for one or two hours, sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

Common faults that can occurr suddenly are a blown capacitor on power board, the inverter board powering up backlight lamp has blown, or a fault on main lcd controller board.
check also the video cable, if the cable is shorting, or the connector is bad, you can get same flashing state because of the video cable.

Check connectors, try moving the video cable, and if the cable is not built in, then also try a replacement cable.
Regards

Mar 06, 2009 | Philips Computers & Internet

1 Answer

The blinking green light on VX922


If there is a flashing led on front of the monitor, that indicates a fault condition.

The flashing light indicates a diagnostic state called protection.
When the Monitor goes on protection there are only two possible causes.

1 The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or a broken contact, identified an internal fault and kicked in , starting the flashing light.


If you are in situation one, then the monitor will reset just unplugging power cord for one or two hours, sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

Common faults that can occurr suddenly are a blown capacitor on power board, the inverter board powering up backlight lamp has blown, or a fault on main lcd controller board.
check also the video cable, if the cable is shorting, or the connector is bad, you can get same flashing state because of the video cable.

Check connectors, try moving the video cable, and if the cable is not built in, then also try a replacement cable.

If under warranty contact Viewsonic to find out a Viewsonic service point.
See:ViewSonic - Support & Service

If you want to repair at your own expenses, just locate any good qualified repairer.


Regards

Feb 26, 2009 | ViewSonic VX922 19" Monitor Flat Panel

1 Answer

My monitor blinks on and off


If there is a flashing led on front of the monitor, that indicates a fault condition.

The flashing light indicates a diagnostic state called protection.
When the Monitor goes on protection there are only two possible causes.

1 The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or a broken contact, identified an internal fault and kicked in , starting the flashing light.


If you are in situation one, then the monitor will reset just unplugging power cord for one or two hours, sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

Common faults that can occurr suddenly are a blown capacitor on power board, the inverter board powering up backlight lamp has blown, or a fault on main lcd controller board.
check also the video cable, if the cable is shorting, or the connector is bad, you can get same flashing state because of the video cable.

Check connectors, try moving the video cable, and if the cable is not built in, then also try a replacement cable.

If under warranty contact manufacturer to find out a service point.

If you want to repair at your own expenses, just locate any good qualified repairer.


Regards

Feb 16, 2009 | Westinghouse LTV20V2 20 in. EDTV-Ready LCD...

1 Answer

Monitor do not want to come on


The monitor is probably on protection.

To start unplug monitor from power and from computer and test computer with different monitor to find out if it is monitor or computer fault.

If it is computer fault and no video signal , then test:

  • Video cable.
  • Video adapter on PC (sometimes integrated on motherboard)
  • Motherboard.

If it is monitor fault , then the monitor is on protection.

When on protection you keep having a flashing led on front of the monitor , and monitor turning off by itself after a while, that indicates a fault condition.

The flashing light indicates a diagnostic state called protection.
When the Monitor goes on protection there are only two possible causes.

1The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or a broken contact, identified an internal fault and kicked in , starting the flashing light.


If you are in situation one, then the monitor will reset just unplugging power cord for one or two hours,sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

Common faults that can occurr are a blown capacitor on power board, faulty inverter board, faulty input board, or a fault on LCD Digital Controller board.

Check also the video cable or any external connection cable, if the cable is shorting, or the connector is bad, you can get same flashing statebecause of the video cable.

Try moving the video cable, and if the cable is not built in, then also try a replacement cable.

If under warranty contact the manufacturer ringing the number on the user manual

If you want to repair at your own expenses, just locate any good qualified repairer.

Feb 02, 2009 | HP W2007 LCD Monitor

1 Answer

Monitor power light is blinking and cannot see anything.


The monitor is probably on protection.

To start unplug monitor from power and from computer and test computer with different monitor to find out if it is monitor or computer fault.

If it is computer fault and no video signal , then test:

  • Video cable.
  • Video adapter on PC (sometimes integrated on motherboard)
  • Motherboard.

If it is monitor fault , then the monitor is on protection.

When on protection you keep having a flashing led on front of the monitor , and monitor turning off by itself after a while, that indicates a fault condition.

The flashing light indicates a diagnostic state called protection.
When the Monitor goes on protection there are only two possible causes.

1The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or a broken contact, identified an internal fault and kicked in , starting the flashing light.


If you are in situation one, then the monitor will reset just unplugging power cord for one or two hours,sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

Common faults that can occurr are a blown capacitor on power board, faulty inverter board, faulty input board, or a fault on LCD Digital Controller board.

Check also the video cable or any external connection cable, if the cable is shorting, or the connector is bad, you can get same flashing statebecause of the video cable.

Try moving the video cable, and if the cable is not built in, then also try a replacement cable.

If under warranty contact the manufacturer ringing the number on the user manual

If you want to repair at your own expenses, just locate any good qualified repairer.

Dec 16, 2008 | TDV Vison TDV FV19B 19" Flat Panel LCD...

1 Answer

Monitor power light is blinking .but monitor is not displaying anything after 4 hr monitor blinking light is become slow and when restart the monitor is displaying after 4 hr please help me i have a 20.1...


If there is a flashing led on front of the monitor, that indicates a fault condition.

The flashing light indicates a diagnostic state called protection.
When the Monitor goes on protection there are only two possible causes.

1 The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or a broken contact, identified an internal fault and kicked in , starting the flashing light.


If you are in situation one, then the monitor will reset just unplugging power cord for one or two hours, sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

Common faults that can occurr suddenly are a blown capacitor on power board, the inverter board powering up backlight lamp has blown, or a fault on main lcd controller board.
check also the video cable, if the cable is shorting, or the connector is bad, you can get same flashing state because of the video cable.

Check connectors, try moving the video cable, and if the cable is not built in, then also try a replacement cable.

If under warranty contact manufacturer to find out a service point.

If you want to repair at your own expenses, just locate any good qualified repairer.


Regards

Oct 15, 2008 | Westinghouse LTV20V2 20 in. EDTV-Ready LCD...

1 Answer

Samsung crt monitor


The monitor is probably on protection.

To start unplug monitor from power and from computer and test computer with different monitor to find out if it is monitor or computer fault.

If it is computer fault and no video signal , then test:

  • Video cable.
  • Video adapter on PC (sometimes integrated on motherboard)
  • Motherboard.

If it is monitor fault , then the monitor is on protection.

When on protection you keep having a flashing led on front of the monitor , and monitor turning off by itself after a while, that indicates a fault condition.

The flashing light indicates a diagnostic state called protection.
When the Monitor goes on protection there are only two possible causes.

1The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or a broken contact, identified an internal fault and kicked in , starting the flashing light.


If you are in situation one, then the monitor will reset just unplugging power cord for one or two hours,sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

Common faults that can occurr are a blown capacitor on power board, faulty convergence, fault on alignment circuits, flyback problem , or a fault on Digital board.

Check also the video cable or any external connection cable, if the cable is shorting, or the connector is bad, you can get same flashing state because of the video cable.

Try moving the video cable, and if the cable is not built in, then also try a replacement cable.


Jul 12, 2008 | LG Flatron Ez T710BH 17" CRT Monitor

2 Answers

F-17 neovo monitor stopped working. power light is flashing yellow


The flashing light indicates a diagnostic state called protection.
When the Monitor goes on protection there are only two possible causes.

1 The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or a broken contact, identified an internal fault and kicked in , starting the flashing light.


If you are in situation one, then the monitor will reset just unplugging power cord for one or two hours, sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

Common faults that can occurr suddenly are a blown capacitor on power board, the inverter board powering up backlight lamp has blown, or a fault on main lcd controller board.
check also the video cable, if the cable is shorting, or the connector is bad, you can get same flashing state because of the video cable.

Check connectors, try moving the video cable, and if the cable is not built in, then also try a replacement cable.
Regards

Jan 03, 2008 | Neovo AG 17" LCD Monitor

Not finding what you are looking for?
Dell E173FP 17" LCD Monitor Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...