Question about Garden

1 Answer

Composite decking is cracking and peeling off

I bought a house which have composite decking in patio and recently I noticed its peeling off after rainy season. After looking more closely I found the person who installed the decks haven't left enough spacing inbetween. I already peeled off the deck from top and would like know what is best solution to fix it. I read online about restore it and deck on which are available in home depot. Would like to know if someone have experience with it.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 60 Answers

Hire a reputable contractor

Posted on May 09, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which deck building contractor is best to hire in Virginia?


For deck building you can check Paragon remodeling contractor work from here: http://www.paragonremodeling.com/deck-portfolio/index.html. These deals in North Virginia area.

Sep 21, 2013 | IMSI Software Turbo Floorplan Instant Deck...

1 Answer

Painting Pressure treated wood.


First of all it will need to be power washed well or washed & scrubbed then left to dry well at least over night.

Any good quality deck coating should stick fine to a 10 yo wooden deck.

You should probably thin the first coat a little for better penetration, and let dry thoroughly, sanded if needed then add one or two top coats full strength.

Depending on where you are, you should re coat every 2-4 years.

Jul 07, 2013 | Tools & Hardware - Others

2 Answers

Laminate flooring repair


If it's older laminate it will be glued together making repairs impossible.

Apr 06, 2013 | Vacuums

1 Answer

We were given an 87" stainless steel propane patio heater. Our deck ceiling is 96". Will that be enough clearance?


Had a look at the manual on a BFX750 patio heater and the distance required is 50cm above (18") and 60cm to the side (24"). If its the same type with around 13kw or 44,000BTU/h of power then this is the clearance is needed for air and heat.

Dec 31, 2012 | Stainless Garden Sun Steel Propane Patio...

1 Answer

I bought a second hand 12' x 12' Camel Patio Screen House. It has no instructions and no picture on the box. I can not work out what goes where!


Here are the Setup Instruction images for your Camel Patio Screen House. It is a maze. Get back to me with email / phone if any problems viewing these.

Lenny.

3_2_2013_12_08_31_am.jpg


3_2_2013_12_11_01_am.jpg

Dec 30, 2010 | Garden

2 Answers

Cracked deck


I bought a second-hand York Inspiration, and it developed the same problem. Upon dismantling the treadmill, I discovered the deck was cracked in two areas. My solution was to put a section of chipboard over the crack on the underside, securing each section with 12 screws. I used 16mm board. I cannot remember the other dimensions of the board, but it needs to fit between the deck support rails lengthwise, and widthwise between the screw holes for the foot rails. It is best to tape the edges of the boards to ensure they don't shed any debris once fitted.

The Inspiration manual contains an exploded diagram to assist with dismantling the treadmill. If you do not have one, it is available as a PDF on the web.

It's fairly straightforward to dismantle the treadmill.

The only part of any difficulty is the foot rails; once the screws for the foot rails are removed they stay put, as they are stuck down with strong double sided tape. Ease them off gradually. Once you have removed them, mark the front of each with a bit of tape, as the screwholes are not symmetric.

Apr 06, 2010 | York Barbell Home Use Fold-Up Treadmill

1 Answer

Punch software- Landscape, Deck--3D feature pitched black


Read the design software's readme and system requirements.  If that doesn't help: Ask. Punch.

Aug 22, 2009 | Punch Computers & Internet

Not finding what you are looking for?
Garden Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

roeb

Level 3 Expert

540 Answers

john h

Level 3 Expert

12650 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...