Question about Sanyo Cameras

1 Answer

Pc wont recognize camera

Sanya isa 6400, have a usb cord, but pc wont recognize

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Sanyo Master
  • 102,366 Answers

Try NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo management program such as Picasa ( http://picasa.google.com ).

Posted on Mar 25, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

clusterfx
  • 67 Answers

SOURCE: usb not recognizing camera

you have to install drivers on your computer before it will recognize it.

go to

http://www.fujifilmusa.com/JSP/fuji/epartners/
ServiceSupportProduct.jsp?prodcat=710738

and install the usb drivers for your operating system ie windows xp

Your computer will recognize it after that whenever you plug it in:)

Posted on Feb 23, 2008

tjzteddy
  • 53 Answers

SOURCE: computer not recognizing camera

search your camera for the option of changing between PTP mode and Mass Storage mode

Posted on Jul 31, 2008

geemarie
  • 876 Answers

SOURCE: pc cant recognize the camera on the USB port

What is the Pc doing that shows you it is not recognizing the camera?
Have you looked in My computer at your drives to see if it is showing there? For some reason mine sometimes shows up my F drive instead of my camera drive. Then you can just click on the drive and open the folder for the photos.

Posted on Aug 22, 2008

  • 38 Answers

SOURCE: MacBook Pro won't recognize canon powershot SD400

Hello. You need to probably reinstall the drivers. but first you have to remove the drivers that are all ready installed. first unplug your usb cord. then to remove the drivers allready installed,, on your computer, press start, then when the box open's up, then right click on computer. another box will open up. then left click at the bottom of that box on properties. another box will open up, then click on device manager. after you click on device manager another box will open up with all your devices. look for the previous camera you had installed. it might be under imaging devices. once you locate that, then right click on it. then choose uninstall. Make sure you have your new software loaded in your cd/dvd rom drive. after it is done uninstalling, just restart your computer. at the bottom right of your screen, it should say, found new device, it will ask you from where do you want to load the new drivers for it. click on the drive that contains the software. it then will load your new drivers up. It then should communicate with your camera. Hope this helps. Ron

Posted on Sep 08, 2009

  • 206 Answers

SOURCE: the camera wont load pics onto the computer.

try plugging it into some other USB port and even try uploading the drivers of the USB!! or best is try using some other USB to test it!!
reply and rate!!

Posted on Jul 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does usb device not recognized ?


Hi,

The best you can do is,

Turn off the PC/Laptop
Disconnect the USB cable from Camera to pc/laptop

Disconnect the power cord connecting the pc/laptop and the wall jack or surge protector
Disconnect the power cord connecting the camera to wall jack or surge protector

wait for 5-10 mins

Connect the power cord of PC/laptop and turn on the pc/laptop and login to your PC
Connect the power cord of Camera to wall jack or surge protector

Connect the usb cable or camera to PC/laptop
It should get recognised and work fine.


Regards,
Shawn


* Please rate this solution with Thumbs up and Testimony to help us improve providing support

Jan 20, 2011 | HP Photosmart R847 Digital Camera

1 Answer

Computer does not pick up the camera when plugged into the usb


the cammera often needs to be "ON" for the PC to recognize it

May 27, 2010 | Olympus FE-210 Digital Camera

1 Answer

Hello! I installed windows Xp-pro on pentuim of


first install correct usb drivers, for your moterboard
them your camera is recognize

Oct 30, 2009 | Intel Refurbished SLOT1 ATX SYSTEM BOARD 2...

1 Answer

Usb device not recognize


You mentioned that you uninstalled the unknown device from the Device manager. If you uninstall it then connected your usb flash drive you will see an error again on your device manager. This means that the driver for your usb port is not properly installed.

To install it, visit dell website, look for the model of your machine and locate the driver, download it then install from your machine.

Jun 02, 2009 | Dell Inspiron 6400 Notebook

2 Answers

USB device not recognized


This solution worked for me when I got the USB device not recognized message:
http://www.infobarrel.com/USB_Port_Repair
It can be quite frustrating. I've heard that older computers are more likely to have the USB device not recognized message.

May 31, 2009 | Dell Inspiron 6400 Notebook

1 Answer

My computer not recognized the USB Flash memory, but it recognized other device like the mouse, webcam scanner, digital camera ... Thanks for your help


if usb flash memory is working on other computer/laptop then do the following step.

Insert the usb flash memory.
Goto desktop, right-click my Computer, click Properties, click on Harware tab, click Device Manager button.

There should be yellow exclamation(!) sign showing Unknown Device
Right-click and select UnInstall.

Reboot your laptop
Insert the usb flash memory.

It should work.

May 30, 2009 | Dell Inspiron 6400 Notebook

1 Answer

PC wont recognize usb from camera


Check the Canon website under support and see if there is a USB download fix for either a PC or a firmware fix for the camera. Also, sometimes when the USB cord is plugged in the camera and the power is still on, when you disconnect it from the computer or camera. it's like adding a little spike or surge and it seriously damages the USB chip inside the camera. Good luck and maybe you can restore it again. An alternative to the USB function working, is pull out the media card and use an external USB media reader to read and download your pictures. Hope this is some help.   

Nov 01, 2008 | Canon PowerShot A85 Digital Camera

1 Answer

My pc wont recognize my camera


Switch on the camera. Select [PC] using the c / d buttons and press the SET button. Check the wire cord and memory card and USB port and try it with another port.
Click "start "and then select control panel , click cameras and scanners look for your camera
right click in the explorer window ,select properties and then select device manager if there is an yellow coloured ?mark opposite to cameras and scanners then you have to update your camera drivers

Jan 20, 2008 | Vivitar ViviCam 3710 Digital Camera

1 Answer

I cant put pictures onto computer?


you have several options.
1. see first what operating system you computer runs.
if it is vista or mac, it will be recognized as unknown device,
look for SSCAM100 or DCIM folder. you will then see the camera files in that folder.

2. you should also download the cd driver, the cd that comes with the camera, to your PC. this will help the connection be proper.

3. if you're using desktop, try to connect the camera at the back of your tower. look for a USB port at the back of the tower and connect USB cord to it.

4. make sure you're using the proper USB cable, the cable that comes with the camera. for your S630, it is USB cable type 2.

5. also, make sure before you connect camera to PC, camera is turned off, when the USB cord is properly connected, that is the time camera should be turned on.

6. when unpluggin the camera to PC, make sure that you are safely removing the device from the PC so you will not have future connection problems.

hope my suggestions work for you.

Jan 06, 2008 | Samsung Digimax S630 Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Cameras Experts

kakima

Level 3 Expert

102366 Answers

ray gallant

Level 3 Expert

41454 Answers

The Knight
The Knight

Level 3 Expert

73635 Answers

Are you a Sanyo Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...