Question about Broksonic Televison & Video

1 Answer

No remote can't switch to component

I can't figure out how to switch it to component

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Broksonic Master
  • 73,691 Answers

If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its user manual. Never accept a remote control, that hasn't both of this. If you see the site by "MOSAIC" view, will make surf easier.
http://electrohelponline.blogspot.com/

Posted on Mar 29, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung AK59-00123A remote to a M261VP vizio tv


Hello

[1] Switch your television on

[2] Point the remote control towards the
television

[3] Press and hold the TV POWER button, and

then enter the two-figure code in the table

to the right that corresponds to the brand of

your television by pressing the appropriate

number buttons.

If your television is compatible with the remote

control, it will switch off.

The remote is now programmed to operate
the TV.
The code for Zenith TV is [TV POWER + 63]

Sep 20, 2011 | Zenith ZEN700 Remote Control

1 Answer

I can't figure out how to program cable box. The cable is hooked up to the TV, but I can't find out how to get channels. Is there a certain menu or imput?


Are you getting any picture at all? check your tv's input button on the remote if your cable box is hooked up with hdmi select hdmi, if it is component video cable select component video, and if it uses a coaxial cable it should be something along the lines of tv. Push the input button on the remote to switch between the different modes

Mar 20, 2011 | JVC HD-56FN97 56" Television

1 Answer

I am trying to hook up my sons Playstation to it through the Video Input on the back but can't figure out how to switch it from TV mode to Video input.


1.) What TV Make Model?

2.) Is there a VCR/TV button on the remote?

3.) If there is an input on the remote, some model TV's expect a number pressed after the input button is pressed.

4.) What is the video cable are you using on the PS3:
HDMI (flat rectangular on both ends)
original cable(Yellow/White/Red)
Component cables (Red/Green/Blue)

Jan 17, 2011 | Televison & Video

1 Answer

Hello, I purchased my Toshiba TV 27DF46 at a thrift store and it did not have a remote and I cannot figure out how to get my av ports to work. I have tried changing the channel manually and using my...


There are several different options to solve your problem. You should be able to program your cable box remote to replace many (but probably not all) of the functions of the Toshiba TV remote that you're missing. Read the user manual that came with your cable box remote to find out how to program it to control different types of components. It's not very difficult and that would be your least expensive option. Another suggestion is to buy a "universal replacement remote" that are sold in many electronics stores. Once you program those universal remotes, they will perform most/many of the functions of the original (Toshiba) manufacturer's remote. A "universal replacement remote" can cost anywhere from $20 to well over $100 depending on how many electronic components you want to control. My best suggestion would be to buy a replacement remote that was specifically made for your Toshiba model 27DF46 TV. There are many companies on the Internet which sell those remotes specifically made for your TV. The cost is usually between $25 - $35. One last inexpensive option would be if you already have any other Toshiba components (like a Toshiba DVD player), in many cases, the remotes are nearly identical and will provide most or all of the same functions. I would start by trying whichever option makes the most sense for your particular situation. Good luck.

Aug 11, 2010 | Toshiba 27DF46 27" TV

1 Answer

Forgot how to set remote up with tv


For the RCA RCR412S you might find that it doesn function like the manual says it should be functioning. In my case the Direct Entry method didn't work with my Sharp TV or my Panasonic VCR. I then had to figure out how the Automatic Search method worked because the manual was incorrect. Here is how to program the RCR412S using the Automatic Search method:

1) Turn on the component you want to control (TV, VCR, DVD)
2) Press and hold BOTH the component button on the remote and the On-Off button
3) The On-Off button remains lit. Now press Play (The On-Off button will blink)
4) If, after five seconds, the component does not respond, continue to press the PLAY button every five seconds until the component turns off.
5) When the component turns off, press and release the REVERSE button, then wait two seconds to see if the component turns on again.
6) To save the new code, when the illuminated ON-OFF button turns off, press and release the STOP button.

You can download the manual here:
RCR412S Manual

Mar 19, 2009 | RCA Universal Remote Control

1 Answer

AudioLogic DVD-108 - help setting up component cables (no picture)


This may not be a solution, but is a good start. I recently bought a house with the theater system installed, but no remote. Had similiar problems with some functions on Universal remote. Did a google search and got the remote for my system and presto! I did a google on the DVD-108 and saw a AudioLogic remote(similiar, Originals are no longer available), and saw that there is a "setup" button as well as others that may select inputs. This may not be a solution, but would be a good start. Worked for me!

Jun 26, 2008 | Audiologic DVCR-251

2 Answers

HOW TO OPERATE PROSCAN REMOTE MODEL CRK76DBL1..


I still have not figured out how to program the exact code in the crk76DBL1.

However, I did figure out how to use the code search for the TV

1) Turn on the component you want to control (TV, VCR, DVD)
2) Press and hold BOTH the component button on the remote and the On-Off button
3) The On-Off button remains lit. Now press Play (The On-Off button will blink)
4) If, after five seconds, the component does not respond, continue to press the PLAY button every five seconds until the component turns off.
5) When the component turns off, press and release the REVERSE button, then wait two seconds to see if the component turns on again.
6) To save the new code, when the illuminated ON-OFF button turns off, press and release the STOP button.

I hope everyone finds this helpful and saves people time and frustration.

Feb 22, 2008 | RCA DIRECTV Satellite Remote Control

6 Answers

RCA RCR 3273 universal remote


for codes:

http://www.rca.com/codefinder

Nov 27, 2007 | RCA Universal Remote 3 Device Remote...

1 Answer

Hdmi receiver to hd plasma tv


1) I believe the "3 prong" you mean the RCA A/V cable. This cable is color coded red/white/Yellow (Right Audio/Left Audio/Video). This cable is OK for regular TV but when it come to HD, the quality of the picture fall short.

But you also could mean the 3 wires component cable that color coded Green/Blue/Red. If you plug only this without the Red/White for the speaker then you will only see the picture. This component cable help make the pic a lot clearer. But I believe not as good as DVI and HDMI. More info here http://en.wikipedia.org/wiki/List_of_display_interfaces

2) Most universal remote control come with a preset of keys to emulate other remotes. You need to search for the owner manual to figure out how and what code to put to use with a certain device.
Most new Universal remotes has a learning mode too that the user can "teach" the remote to emulate that "IR signal".
Now for the "HOW". It's a little complicated. But here is my 2cents. Most basic remotes has a light in front and this light is Infra Red light. So you don't see the light but it blinks. The blinking is the data of 1 and 0 that computer uses. Most of the time the remote is in sleep mode which uses very little power. One press of the button, it switch on the remote and carry out the performance of that button. The brain of the remote figure out which button was pressed and search in it's memory for the blinking pattern and blinks the light with that pattern and then fall back to sleep.
For the pattern itself, it contain informations. It usually start with the ID of the device that suppose to receive the signal. Follow is the "flag" and then the information of the button that was pressed. Then the final signal is basically say "End" to indicate that the message end. All device within range will get this information but if the ID don't belong to it, it will ignore the entire message.


Hope what I said helped. :D

Nov 01, 2007 | Panasonic PT-53TW53 53" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Broksonic Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73691 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Cindy Wells

Level 3 Expert

5059 Answers

Are you a Broksonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...