Question about Sony CDX-GT300 CD Player

Open Question

CD player works fine and have sound, Tuner plays but no sound

CD player works fine, tuner received stations but have no sound from boxes Reset system a couple of times with no resolds

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Ps3 Repairs
  • 42 Answers

SOURCE: Sony Xplod CDX-S2210S

It is more then likely your faceplate has become non functional, and if so the cd player is almost none functional. If you can remove the faceplate try cleaning the connections that clip into the cd player. But by the sounds of it, your face plate is die'ing out on you. Sorry

Good luck,
IF you need any more help just ask.
Thankyou

Posted on Sep 11, 2008

Ad
welcomejee
  • 10594 Answers

SOURCE: Sony CDX-S2200 CD Player Problem

Please press Reset switch in CDX-S2200. You can see it if you de-attache front panel.
If problem still exist, then you need to replace IC300 " 6-705-360-02 " IC TDA8588BJ/N2/R1

Posted on Oct 02, 2008

  • 15 Answers

SOURCE: Subwoofer in my car works only on tuner

I had the same problem. most radios have a power antenna wire and an amp turn on wire it sounds like your amps are being turned on by the power ant wire that loses power when you put a cd in try swapping the blue with blue and white wire this should solve it

Posted on Nov 28, 2008

thefazool
  • 3 Answers

SOURCE: No sound from cd or aux on CDX-GT32W

Just connect together the solid blue wire on the main harness to the radio with the blue/striped wire. The blue wire is for the power antenna and the blue striped is for the remote amp. but if not connected together only the fm/am has outputs to the line output RCA jacks. I learned this through Sony's tech line and it works perfectly now.

Posted on Dec 15, 2008

  • 1 Answer

SOURCE: sony cdx ca650x has no audio output from tuner, CD is OK

Tuner might be defective , check to see if tuning voltage varies

Posted on Jun 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cda 9885, When in tuner mode sub does not play


Does you car volume get lower when you stop. If not sounds like an internal issue. No sound at all my brother hooked his up and when he switched to tuner everything would go through the subs but you would not know it sounded like his 6x9s no bass. was a wiring issue. I dont know if this helped or not.

Feb 28, 2014 | Alpine CDA-9885 CD Player

1 Answer

Hello i recently just got this Pioneer car cd player and it's started to frustrate me a bit. I've connected it all up as the instructions have said and the first immediate problem was that i...


did you hook the constant power wire up? its the yellow wire coming out of the deck. if this was not hooked up the deck would work fine, but it would not hold the time, or preset stations either

Aug 09, 2011 | Pioneer DEH-1300 CD Player

1 Answer

I just bought the RCA CD/DVD home theater system RTD206. I cant figure out how to change the radio channels. Also cant figure out how to change the cd disk tracks. Does this system have a remote. Or do...


The system does have a remote (at least it should come with one if purchased new), and you need it to control pretty much everything. Here's what the manual says about the radio tuner (you can find the whole manual here) :

Manual Tuning
1. Connect the FM aerial and the AM loop antenna at the back of the unit. Rotate the AM loop for
better reception.
2. Press TUNER to enter TUNER mode and toggle between FM and AM.
3. When the FM station broadcasts Stereo sound, ST is displayed.
4. Tune a station by pressing repeatedly the TUNER+/- buttons until the desired station is found.
Alternatively, you can press and hold the same buttons down for about one second to activate
the automatic search function. In this mode the player will automatically tune frequencies until
it finds a station.
5. Repeat step 4 to tune to another radio station.

Storing radio stations
The player can store up to 30 radio stations in its memory. You can enter every single radio station
yourself or the player can store all available radio stations automatically in ascending order.
Automatic preset programming
1. Press TUNER to enter the Tuner mode.
2. Press and hold TUNER down for 3 seconds to start automatic preset programming.
Note: A weak signal can affect the "Automatic preset programming" function's efficiency. Adjust the aerial for better
reception and a more efficient search.
3. Radio frequencies will be browsed and radio stations stored automaitcally. When all the available
radio stations are stored or all 30 memory locations are full, the auto preset programming
function will stop.

Manual preset
1. Tune to a radio station (see "Manual tuning" for details).
2. Press MEMORY once to enter flashing Preset Loaction number.
3. While the Preset Location number is still flashing, input your desired preset number (1-30) using
the numeric buttons or press the CH+/- buttons, then press MEMORY to store it.

Retrieving preset stations
1. Press TUNER to enter the Tuner mode.
2. Press CH+/- to search up or down for the preset stations or directly press the numeric buttons.

As you see, you really need that remote. The same is true for disc play. While there are front panel buttons for play/stop, disc skip, and drawer open/close, you don't have any other control without the remote. Without the remote control you'll find this system won't do too much, unfortunately. If you bought this new, check the packing material before you throw it away to make sure the remote's not still somewhere in the box. They often come tucked into slots on the foam inserts.

Also, when you hook the unit to a TV, it's just using the TV as a video display device. The TV has nothing to do with any of the system's other functions.

I hope you have luck locating the remote! Thanks for using Fixya.

Jun 29, 2011 | Audio Players & Recorders

1 Answer

Denon AVR 1910 - no sound from v-aux or tuner


The tuner is the best source for testing audio issues from a receiver since it uses an internal source for audio. This problem could be two separate issues. Check the tuning in the tuner to make sure it is on a station that you are receiving. The newer Denons will not play any audio is the station is not coming in. Be sure your antenna is connected and tune the station to one that comes in clear.
What source is hooked up to the V. Aux? If an iPod it is common that the volume on the ipod is down .

Nov 22, 2009 | Audio Players & Recorders

2 Answers

Vrv785bt- No sound except tuner


sounds like u have a premium sound system. what u need to do is take ur blue/white remotewire to ur blue power antennat that should activate ur factory amp.

Apr 16, 2009 | Clarion VRX785BT Car DVD Player

1 Answer

No Sound from CD but I do get sound from tuner


you have the blue, power antenna, wire hooked...
(blue/white is remote for amp)

Feb 20, 2009 | Alpine CDA-7863 CD Player

1 Answer

Tuner Omits No Sound - Onkyo TX-SR605 7.1 Channels Receiver


Make sure your receiver is hooked up to proper AM and FM antennae. Try switching to AM, scan stations. If you hear AM static and/or weak signals the problem could be antennas are not hooked up. FM has AFT which blocks out weak or noisey stations and you wont hear anything without ant.

May 06, 2008 | Onkyo TX-SR605 Receiver

1 Answer

Problem playing CD


Does this CD play in any other unit?
Does your player other CDs fine?

Oct 20, 2007 | Panasonic CQ-CB9900U CD Player

1 Answer

Will not play


on the front panel, look for a tiny pinhole and insert a pin while powered up to reset

May 27, 2007 | Kenwood KDC-MP228 CD Player

Not finding what you are looking for?
Sony CDX-GT300 CD Player Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Car Audio & Video Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

xxxxxx xxx

Level 3 Expert

4874 Answers

Larry Stiles
Larry Stiles

Level 2 Expert

287 Answers

Are you a Sony Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...