Question about Televison & Video

1 Answer

Suddenlink remote lost tv remote. the ok button on the suddunlink remote is mapped to the cbl button. i need it to work on the tv mode. remote is 1056b01

Posted by on

  • Jason Rice
    Jason Rice Mar 26, 2014

    to clarify I already have matched my remote to my tv. All buttons work except the 'OK/Select' button. That button when hit only lights up the cable button at the top. I need it to send the 'select' signal to the tv.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-style-parent:""; line-height:115%; font-:11.0pt;"Calibri","sans-serif"; mso-bidi-"Times New Roman";}

Posted on Mar 25, 2014

  • 2 more comments 
  • Suddenlink Ashley Mar 25, 2014

    My apologies for the type mistake above, Jason. Ashley here from Suddenlink. Please use the following link to find the correct codes to setup your remote. Thanks! http://urcsupport.com/index.php?mso_id=2...

  • Jason Rice
    Jason Rice Mar 26, 2014

    I already have matched my remote to my tv. All buttons work except the 'OK/Select' button. That button when hit only lights up the cable button at the top. I need it to send the 'select' signal to the tv.

  • Jason Rice
    Jason Rice Mar 26, 2014

    and I already looked everywhere on that site. It did show how to remap the channel buttons but not the ok button.

  • Suddenlink Ashley Mar 26, 2014

    Hi Jason - Please feel free to email me directly at ashley-AT-suddenlink-DOT-com. Thanks! -Ashley

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 362 Answers

SOURCE: I lost the remote for

Please follow the steps below to program your remote control to equipment other then your DISH receiver:
Note: If you start this procedure and at any time and do not press a button within 20 seconds, the remote will end the procedure automatically. Simply start over again. Use the TV button for your TV, the VCR button for your VCR or DVD player. These Mode buttons are located at the top of your remote control.
1. With the desired equipment on, press and hold the correct Mode button until all mode button backlights illuminate, then release. 
2. Press the numbers 5-0-0 on the remote control. 
3. Press the Pound (#) button on the remote. 
4. Press and hold the correct Mode button until all mode button backlights illuminate, then release. 
5. Press and release the Power button on the remote control. 
6. Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off. 
7. Press the Pound (#) button. If the code entered is valid for the remote, the mode light flashes three times. 
8. To verify the code works try several different functions for that equipment. 
lone99star

Posted on Jan 09, 2009

skotkolr
  • 558 Answers

SOURCE: Cant program remote control..atlas 1056B01

You can try Funai and Emerson codes

Posted on Apr 06, 2009

  • 1 Answer

SOURCE: Suddenlink remote will not operate my Olevia LCD TV

Device Key Code TV. 1610

  1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc).

  2. On the remote control, press a device key once (i.e., VCR, DVD, AUD, TV, or CBL); it will blink once. Then press and hold SETUP until the selected mode key blinks twice.

  3. Use the lookup tool below to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the selected mode key will blink twice.

    NOTE: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again.

  4. Aim the remote control at the device and press PWR once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (see “Searching for Your Code”).

    NOTE: If the device does not have a PWR key, press the PLAY key.

  5. Repeat steps 1 through 4 for each device you want the remote control to operate. For future reference, write down each working device code in the boxes on the following page.

Posted on Jun 01, 2009

  • 55 Answers

SOURCE: need to program suddenlink remote

You May Try ProView Codes and they are Manufactured in the Same Factory in China

Posted on Oct 08, 2010

  • 44 Answers

SOURCE: I have the new suddenlink

Hi - My name is Tina and I am with Suddenlink. I am very sorry for the issues you are having with the remotes for your new DigitaLink boxes. If you would email me at tina-AT-suddenlink-DOT-com, I would be happy to help resolve this issue. Thanks!

Posted on Oct 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Suddenlink remote


Hi - My name is Shannon and I am with Suddenlink. I would be happy to help resolve any trouble you may be having with your Suddenlink remote. Please email me at shannon-AT-suddenlink-DOT-com. Thanks!

Nov 26, 2013 | Televison & Video

1 Answer

I'm using a Time Warner remote as a universal for my TV but when I go to change channels, it just lights up the CBL button and doesn't change the channel. Can I program it to my TV or will it


Hi, you need to de-activate the "programming channel control lock" option. You can see instructions in the manual for the remote. They are as follows:

  1. On the remote control, press CBL once; It will blink once, Press and hold SETUP until the CBL key blinks twice.
  2. Enter 9 7 3. The CBL key will blink twice.
  3. Press CH- once. The CBL key will blink four times.
    Now the remote control will provide TV and VCR channel-control capabilities while in the TV mode.
for any other information with programming this remote:
Download the 1056B01 operating manual with codes for free.

Nov 30, 2012 | Televison & Video

1 Answer

I have a 27 inch Jansen TV. Remote is lost. I have a universal remote. What codes do I need to program the remote ? and will this code work for all remotes we can buy from Target or Wal-Mart ?


Hello
Three digit remote setup codes for Jensen TV are:
004/ 009
Four digit codes are:
0004 0009 0133
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand
CODE SEARCH METHOD

If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
OK.

Aug 18, 2011 | Jensen Q2749J 27" TV

1 Answer

I need all the remote codes for a synergy5 remote so that i can control my zenith t.v.


Hi
Setup code for Synergy-5 remote control with Zenith TV are:

047 048 049 050 051
391 405 406 434
Proceedings.
[1] Turn on all the electronic devices (TV, VCR, DVD, AUDIO) you want to program the remote to operate

[2] Press [OK], then [MUTE] together until the power / mode buttons illuminate in slow-rotation (i.e. CBL ?
TV ? VCR ? DVD? AUDIO ? CBL...).

[3] (a) To program your TV, locate the 3-digit code for your brand in the TV Setup Code list and enter it on the

keypad of the remote control. Entry of the correct code will cause your TV to turn off. If multiple codes
are listed for your brand, you may have to try several different codes until your TV turns off.
(b) As soon as you have entered a 3-digit code that turns your TV off, press [MUTE].

(1) If the TV turns back on, press [OK] to lock in the code. The power / mode buttons will blink 3-
times and go out.
Or

(2) If the TV does not turn back on, enter a different 3-digit setup code until your TV turns back on.
Then press [OK] to lock in the code. The power / mode buttons will blink 3-times and go out.
OK.

Jul 23, 2011 | Zenith Televison & Video

2 Answers

How can I get the 3-digit device code for a Sanyo TV Set? I lost the list!!


Hello
Three digit universal remote code for Sanyo are:
004/ 013/ 049/ 108/ 110/ 180/ 209

Four digit universal remote codes for Sanyo are:
0049 0097 0110 0004 0268 0012 0108 0180

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
OK.

Feb 20, 2011 | Universal Remote Control Remote Control

1 Answer

I have a suddenlink remote control and my box is working but my remote isn't bringing up the guide or changing channels. The only thing I can control are the device keys.


Hi - My name is Tina and I am with Suddenlink. Couple of suggestions...

1. Please make sure the batteries in the remote are good.
2. Please make sure you have the Source on the Remote switched to CBL.
3. If those two suggestions do not resolve your issue, you could go to the local Suddenlink office and exchange your remote.

If you have any further questions, please feel free to email me at tina-AT-suddenlink-DOT-com. Thanks!

Jun 26, 2010 | Televison & Video

2 Answers

SILVER RC24922-C LOST CODES FOR TV AND DVD


Most universal remotes will drop the code memory if the batteries have been out for more than 1 minute - you will need your instruction sheet to reprogram, this will have the codes too.
If you have lost the sheet then google the remote model number

Mar 19, 2010 | Universal Remote Control GE174Universal...

2 Answers

I can't figure out how to bring up and watch a program i previously recorded on my motorola cable box


Look for a green button marked LIST almost in the center of the remote. If the List button doesn't work, be sure the remote is in the CBL mode (press the CBL button right under Master Power once)

When you get the list of recorded shows up, use the up and down arrow keys to highlight the show you want, then hit the OK/SELECT button. That should bring up another dialog box, look for Play and press the OK/SELECT button again to start.

Dec 12, 2008 | Arris DCT6200 DTV Receiver

1 Answer

Half of controls work


Flashman,

It sounds like the remote might be in TV mode and not CBL mode. When you press the List or Guide buttons, the CBL light on the remote should light up. If it doesn't, press the CBL button (located right under the master Power button) once, then try pressing List or Guide again.

Nov 18, 2008 | Arris DCT6200 DTV Receiver

1 Answer

Suddenlink remote will not operate my Olevia LCD TV


Device Key Code TV. 1610

  1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc).

  2. On the remote control, press a device key once (i.e., VCR, DVD, AUD, TV, or CBL); it will blink once. Then press and hold SETUP until the selected mode key blinks twice.

  3. Use the lookup tool below to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the selected mode key will blink twice.

    NOTE: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again.

  4. Aim the remote control at the device and press PWR once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (see “Searching for Your Code”).

    NOTE: If the device does not have a PWR key, press the PLAY key.

  5. Repeat steps 1 through 4 for each device you want the remote control to operate. For future reference, write down each working device code in the boxes on the following page.

Sep 20, 2008 | Olevia LT42HVi 42 in. LCD Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...