Question about Televison & Video

1 Answer

18" flat LCD TV, won't start

No visual damage outside and in side the board, the adepter, seems in working order is well, reading abt 18.89 V on the output, however when pluged in to the LCD input socket, just reading a 2.81 V of the in socket but on the other side, of it pins of the board, no Bloween caps are visible or any visible damage are seen. Thanks for the help in advance, to troubleshoot that problem. Tony

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,383 Answers

Main IC on the main board short. Replace the main board. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. Pull up older posts there.

Posted on Mar 24, 2014

Testimonial: "thanks 4 the link, but i got that1 alrdy. may i ask how you determined that Main IC on the main board is short? cos it could be the SMPS THATS Gone or a 100 other component, besides 2 change the board it the eziest and the moast expencive solution,Dont you think rthat, and thats if the boaard 4 that model could be found, not very comen brand and part has to be OEM rite..."


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi.if any one can help me abt short circuit was on my laptop adepter. Which part of mother board can damaged.laptop is dead.I see nothing burnt please Regards

Try turning on the laptop without these components installed. It's possible one of them failed and it's preventing the entire computer from starting up properly... Other wise call to customer support ' +1-800-243-0051

Apr 13, 2017 | Computers & Internet

1 Answer

Where can I get an instruction manual for TV? Free TV and Video User Manuals
TV and television manuals and free pdf instructions. Find the user manual you need for your TV and more at ManualsOnline.

[PDF]Operating Instructions LCD Television Manual de ... - Abt

Abt ElectronicsThe images shown in this manual are for illustrative purposes only. Lea estas .... 16) Follow all warnings and instructions marked on the LCD TV. 17) Never push ...

WHEN READING THIS MANUAL. When you see this symbol, please read the accompanying helpful tip. IMPORTANT SAFETY INSTRUCTIONS. Your TV is ...

TV User Manuals, PDF Guides, Service Manuals and ...

Dec 09, 2015 | Televison & Video

1 Answer

My hisense LCD tv won't turn on, every so often it

It could be a number of things, mostly power board and main board.
Power is relatively easy to rule out if you can make simple voltmeter readings.
Look for "how to test" at and there'll be plenty of examples.
Your power board is most likely not going to be there, but the principles are the same for all boards.

Feb 24, 2013 | Televison & Video

1 Answer

My LG LCD 32LD350 seemed to have been fried in a storm last night, stanby red light no longer lit and won't turn on, still see some green lighting inside televison, but it won't turn on, Is it

Is it repairable, well, this question can be answered only after opening the back cover and evaluating the damage. From you side, please connect the TV to a different power outlet where other similar devices are working and see. Then try changing the input device to something that sure works. If it does not work even then, this may need attention by a qualified service technician.

Jul 27, 2012 | LG 32LD350 32 in. LCD TV

1 Answer


Replace the power regulator board as card basis. Its oscillator IC has been damaged. It can't be replacale.

May 07, 2012 | Olevia LT23HVX 23 in. LCD Television

1 Answer

We have a KDL40V5100 which is about 18 months old, we are now seeing a vertical line in the center of the picture which appears to be worst when there is a lot of action going on. It is almost like the...

Yes,this causes are bring it on by a board that call the T-CON board.This T-CON board it is slowly shorting out and slowly dying to bring these vertical lines up and showing up onto the tv LCD screen panel.This T-CON board jobs are to control and filter all the tv pictures pixels before it show up on the tv LCD screen panel.This T-CON board sit in the middle at the bottom of the tv LCD screen panel.Tries websites like, to buy a new refurbish T-CON board for the replacement.

Aug 18, 2011 | Sony Bravia KDL-40V5100 40 in. LCD HDTV

2 Answers

When I turn it on, the westinghouse logo appears, then the signal appear for one or two seconds and the screen goes black. I openned it and i do no see anything wrong (visual examination) with the...

Ur tv still have audio sound after the tv LCD screen panel gose blank?Yes,than the tv long LCD inverter board it is shorted and dead,must be replaced,mean not thing visually examination is good or no burn mark on the board,because this it not a power supply board sections dosen't draw much heat to causes any visual damages.

Aug 11, 2011 | Westinghouse SK-32H540S 32 in. LCD TV

2 Answers

My samsung LE40R74BD set works fine for about 10 mins then screen goes blank (black) . It would appear there is no back lighting. I have visually checked the psu for blown capacitors but all seem to be...

This does not seem to be a power supply issue but rather an issue with the backlight inverter board. When the screen goes black, take a flash light and focus it on the screen from a close distance and several angles. See if you notice a very faint image. Try changing the channels to make it more noticeable. Try it and let me know

May 09, 2011 | Samsung LE40R73BD 40 in. HD-Ready LCD...

1 Answer

Can't get any signal, or watch dvd's. Everything is plugged in and working a few hours ago; when I got back home, nothing's working

jiwurster, If your unit seems to have a "black" lcd screen, then you may want to read a testimonial in my fixya profile. Your unit may also have bad electrolytic filter capacitors on it's "switch-mode-power-supply" circuit board. Check your board visually for swollen/leaky "CapXon" brand electrolytic filter capacitors. If not into doing inspection, you will need to contract out the work. Just do some reading here on fixya in the profiles of "budmrtn" "buddymc" "12fixlouie" The problem (poor quality/infantile failure) of CapXon filter capacitors is also rampant in the CCFL-back-lit-lcd monitor industry affecting nearly all brands of monitors. Hope to see reply from you after you do the investigation and pay a visit to YOUTUBE to see video clips of owners/technicians who have successfully refurbished their power supplies inside of the lcd monitor or lcd tv. I'm 12fixlouie on fixya or lmistyrel on aim Hope to to see reply from you.

Aug 15, 2010 | Olevia Kolin DLT2711M 27 in. LCD...

2 Answers

Screen goes dark after few minutes

check your LCD inverter maybe there is loss connection or some parts damage from inverter.

May 05, 2009 | Polaroid TLA-01511C 15 in. LCD Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides