Question about Brother HL 5250DN Laser Printer

2 Answers

Printer does not turn on at all. No lights, Changed power lead and power point. Still nothing. Is there an internal fuse?

Printer was working fine yesterday, nothing this morning.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 147 Answers

Make sure your printer is properly connected with network. and it is not in sleep mode. If it is in sleep mode. Then you have to restart your printer.
If your printer is connected properly but your computer is still not working fine then you need to contact to brother tech support.
Brother Tech Support Phone Number 1 800 585 2494 Techfix247

Posted on Jun 05, 2017

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Brother Master
  • 783 Answers

HI Lan,
Go To Below official Brother Printer Solution Page For Your problem, The printer will not turn on Brother Still having Problem Then follow Us For Brother Printer Support

Posted on Mar 24, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Are there fuses that can be changed on a Bernina 340?


Oooh, your machine may have been fried. It is recommended that machines always be plugged into power surge units and unplugged when not in use.

You'll probably need to take it for service. Your Bernina is a pretty nice machine and it may just need a computer component replaced. What is the repair cost vs machine replacement?

Feb 22, 2016 | Bernina Sewing Machines

1 Answer

I have a "alpine cde-102ri"radio in my car and it usely turn on it self when the key are in the ignition. But one day it didn't turn on. When I press any buttons nothing happens. Even when the motor is...


here are some troubleshooting for no function or display

• Vehicle's ignition is off.
- If connected following instructions, the unit will not operate
with the vehicle's ignition off.
• Improper power lead (Red) and battery lead (Yellow) connections.
- Check power lead and battery lead connections.
• Blown fuse.
- Check the fuse of the unit; replace with the proper value if
necessary.
• Internal micro-computer malfunctioned due to interference noise
etc.
- Press the RESET switch with a ballpoint pen or other pointed
article

hope this helps

Jan 19, 2015 | Alpine CDE-102Ri CD Reciever, iPod and USB...

1 Answer

Maytag Epic dryer model MED9800TQ0. Dryer was running fine, changed loads, held the start button down, it beeped and attempted to turn the drum, clicked and nothing. All the controls light up, timer...


does the element come on at this point ?
I'm not sure if you tried this already or not, but i would unplug the unit and wait a min and plug it back in and see if it resets and then works again . you could have had a power surge .

Nov 05, 2013 | Maytag EPICz 6.7 Cu. Ft. 8-Cycle King-Size...

1 Answer

Hitachi LCD TV Dead


There is a internal fuse on the power supply board. When you plug in the set, does the standby light come on?

May 10, 2013 | Hitachi 42PD7200 42 in. HD-Ready Plasma...

2 Answers

Wharfedale LCD2710HDAF no power to tv, checked cable and changed fuse a few times, new power lead? or is this a common problem?


Hi.

The power cord must be checked using a multimeter. The test is done reading impedance (ohms) between plug's prongs and contacts to TV power board.

If the power cord is OK and there is no power, then the problem is the power board inside the TV.

Regards.

Ginko.

Dec 04, 2011 | Televison & Video

1 Answer

Mirage LF 150 Sub Woofer. sub not working


within the sub amplifier is an electronic amplifier, that is shorted and blown a fuse. This is all internal. If you can dismantle this module, I suggest do so and any electrical/electronic individual will identify the part needed. you could also check on a replacement module-complete.

Mar 04, 2010 | Mirage LF150 Subwoofer

1 Answer

I have changed my fuse but still have no green light on my printer


ALL LIGHTS ARE OFF -
PRESS THE POWER BUTTON TO MAKE SURE THE PRINTER IS ON
TURN OFF THE PRINTER AND MAKE SURE THE POWER CORD IS SECURELY PLUGGED IN
MAKE SURE YOUR OUTLET WORKS AND AS NOT FUSED OR IS NOT CONTROLLED BY A WALL SWITCH OR TIMER.
TRY PLUGGING THE POWER LEAD INTO ANOTHER SOCKET
YOU COULD HAVE A FAULTY LEAD

Nov 03, 2009 | Epson Stylus R265 InkJet Photo Printer

1 Answer

Gateway mx6447 wont power up at all


Basic rules say check the fuse in the olug, is it still woking. 2 is check the lead with Multimeter or Voltmeter, 3 is check the battery. I wont go further.

Feb 10, 2009 | Gateway MX6447 Notebook

Not finding what you are looking for?
Brother HL 5250DN Laser Printer Logo

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

James Cagle
James Cagle

Level 2 Expert

453 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...