Question about Washing Machines

Open Question

The machine fail to work and it display T98-219

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Bosch Axxis+ wfr2460uc. And as you can see from the picture, my display doesn't work at all. What do I do?


Front display board has failed or has a bad connection. With the machine unplugged remove the top of the machine and check that the ribbon cable and any connectors to the display board are inserted correctly.

Mar 07, 2015 | Bosch Washing Machines

1 Answer

Msi loptop no displays problem


Hi
I'm sorry but I could not find anything about this motherboard / machine. However most laptops have the facility to plug in a monitor via a VGA port on the machine. If doing this works then check settings on your computer to ensure that it is not set to only display on an external monitor. If it doesn't work, try booting your computer in "safe" mode (Press F8 during boot) if you can see anything either during boot or with ext monitor. If all these fail then probably the graphics section of your motherboard has probably failed and a new motherboard will be required to solve the problem unless the graphics card is separate (unusual in a laptop of this age).
Regards

Jul 15, 2014 | MSI KM2M Combo-L (MS-6738-010) Motherboard

1 Answer

Key Lock on the Display


you must do this with ever program until the lock is off
or
you know the last program you used
switch on
hold the clock button for 5 seconds
did it unlock if not switch try next program

Jan 06, 2014 | Bosch Washing Machines

1 Answer

Machine - Zanussi ZKG7125 The digital display has


Possible that the processor has failed and you might be in for an expensive repair. It is possible that the main board needs to be replaced. Remove the card and check for loose joints or moisture in the circuit.Dry and refit the board, if not you might need to check for replacing the board

Aug 02, 2013 | Zanussi Washing Machines

1 Answer

Gaggia Titanium blocks on display screen


The main board has failed.
Sorry no quick fix for that one

Jan 07, 2010 | Gaggia Titanium Espresso Machine

2 Answers

My washer doesn't drain and won't spin it has a fault code of lr what's up with it


The problem was with the component that i suspected, the motor control board. I replaced it and everything is operating as designed. Thanks for your feedback and confirmation of my thoughts.

Nov 02, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

DRYER NOT WORKING


E10 means theres no water going into the machine.Your machine has a triple water valve the 1 that feeds the dryer has proberly failed. Comes as a comp unit.

Dec 02, 2008 | Zanussi FJS1225W Front Load Washer

1 Answer

How do i program the machine to print only failed fax confirmations?


Press "function" button Press "7" Press "set" Display reads - Set Mode (01-99) No.= Press "4" Press "set" Display reads - Fax Parameter (01-99) Press 1 then 2 Press "set" Display reads- Comm. Journal 1= off 2=always 3=inc. only (printout when comm. has failed) Select 3 press set Press "stop"

Jul 03, 2007 | Panasonic Panafax UF-790 Plain Paper Laser...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...