Question about Samsung LN46B630N1FXZA 46in Lcd Tv 1080p Toc
If i'm washin a a tv chanel and this has a logof then stared to showing color nines
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Samsung plasma TV
Afraid the panel has failed, this line will not goaway, it may disapear for sometime but will always return and the bad news to replace this panel will run $950.00 just for the part
Posted on Feb 15, 2008
This is a very common problem with Samsung CLX-3160 and CLP-300 printers. The real problem is that the developer blades get dirty with the toner. Buying a new imaging unit will only fix the problem for a short period of time then it starts to get buildup on the developer blades.
You need to clean the developer blades. If there are streaking on any color, then also needs to be cleaned.
To clean the developer blades, look to this link. http://losingambition.com/clp300imagefix/ It describes how to clean them. It only takes a few minutes to do once you get the developers out of the unit. Just be careful when you clean the edge of the blades. You need to make sure that the residue is completely removed from the edge. Also be sure that when you reinstall the blade that the little foam does not get trapped below the blade. Otherwise when you print the side where the blade is not properly installed will have too much color.
If you are afraid of messing your printer up, then you need to buy a new imaging unit. They go around $100.
Posted on Dec 24, 2009
I have sound but my tv screen is black. Sometimes when I turn on the tv I get a picture but after 15 minutes or so the screen goes black again.
It's a 4 year old LCD.
Posted on Jan 05, 2010
had a very similar situation with my Phillips 42 in. LCD TV.
Here was my Problem. The Power Supply Board. I opened it up( Warranty was Expired) and found several faulty capacitors on the PSB. Its pretty common. Major Electronic companies were sold faulty capacitors that fail in 2-5 years instead of 10-20 due to a lack of preservatives. It wouldn't surprise me if you have the same problem. TV will work fine for a few years and then just fail completely or slowly deteriorate.
Here are the solutions
1. Have it Repaired
2. Check for faulty caps and if you find some(budged or leaking) you know you have located a problem
Remove the board and replace the whole thing.
3. If you have some soldering skills you can replace the faulty caps.
Caps are very inexpensive, under a dollar in most cases. I replaced 4 for about $5.00
Hope this Helps.
Posted on Dec 10, 2010
Tips for a great answer:
Apr 30, 2018 | Samsung Televison & Video
Feb 28, 2016 | Vizio E-Series E470I-A0 47" LED TV...
Jan 03, 2016 | Samsung Televison & Video
Feb 12, 2010 | Samsung HLR5067WX 50" Rear Projection HDTV
Mar 23, 2009 | ESA PDP4294LV1 42 in. EDTV-Ready Plasma TV
Dec 31, 2008 | LG RU-27LZ50C 27 in. HD-Ready LCD...
Dec 05, 2007 | Televison & Video
Mar 16, 2007 | Sony PFM-42X1 Plasma TV
Feb 10, 2016 | Samsung LN46B630N1FXZA 46in Lcd Tv 1080p...
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: